Building tools with your own hands: shovel for shovel

The right tool, which does not fail at the most crucial moment, is half of the good result of the work! In this article we will tell you what a shovel is for a shovel, how to choose a finished product or make it yourself.

It would seem that such a simple tool of labor, but it is absolutely indispensable in everyday life. Especially during construction work. When the shank is strong for a shovel, it is easy to work with a tool, and few people pay attention to its "leading" role. And if suddenly it turns out to be too short or long, badly fixed, then it becomes much harder to work.

The main mistake of many masters is that they in a hurry buy a shank for a shovel (the price in this case is a decisive factor) and they want to attach it to the existing bayonet. The result leaves much to be desired. Therefore, it should be borne in mind that shovels are divided into three types: P, B and Y. Accordingly, each type has different pads and different metal canvas, they have their own thickness and a certain size. Knowing the type of tool, you will be able to correctly select the shank for the shovel.

So, let's see what kind of damage is unacceptable for normal operation.

1. Notches.
2. Cracks and splits.
3. Wormholes.
4. The presence of rot.
5. Untreated knots.
6. Chipped.

A normal shank for a shovel should have an even, uniform color and a smooth surface. In general, for each tool there are special GOSTs that are designed taking into account ergonomics, possible loads and operating conditions. For example, a bayonet shovel with a handle, the price of which varies depending on the manufacturer, is manufactured in accordance with GOST 19586-87.

As for auxiliary tools for construction, it is better to take a shovel. It perfectly copes with various loose materials: crushed stone, expanded clay, coal, sand, gravel and so on. For this type of tool, an aluminum shank for a shovel is most often used. For cleaning snow is more suitable for a durable, but lightweight plastic.

Now we will try to make a shovel for the shovel with our own hands. We take a finished wooden rack with a section of 3 x 4 cm or cut it out of a suitable board. If it is necessary for the work to be done so that the hand does not slip, you can leave it that way, do not round it. In the event that this option is not suitable, using a hand plane we round the corners. The end of the cuttings is gradually sharpened, periodically trying on it to the bayonet. Do this until it begins to enter about half the groove. If you did everything correctly, then the shovel for the shovel should enter the bayonet without problems. With strong strikes against a hard surface, we drive it to the very end of the groove.

That the shank for the shovel held more firmly, it is recommended to fix it with screws. If you do not have them at hand, you can take the usual nails. There remains the final touch! With sandpaper we will walk along the entire length, processing all small irregularities, and cover with varnish. Your personal assistant in the household is ready!