A swan of tires how to do?

Do you like the swan of the tire, how to make it yourself? We turned 1.5 years old, and we began to prepare for the kindergarten. Having visited the site of their future group, they realized that the work is not just there, there are a lot of it. Since we were given an absolutely empty site where it was necessary to create everything necessary for the parents' hands, starting with a sandbox and ending with a veranda. We made everything, making our own contribution, because here it was necessary to walk our children. I will not dwell in detail on how to build a sandbox, boat, etc. Of wood, because such things are not difficult to perform.

I want to dwell on how we decorated the children's playground. Namely, they decided to create creations from automobile tires. A lot of options have been suggested, but they have settled on some of them. Each of them requires imagination from those who will make them, because only this way you can "breathe" life into them and make them truly bright and beautiful. We made frogs and swans from old tires. They turned out to be so alive and cute, at the same time, it's important that cutting a swan out of a tire is quite simple and not costly. Since the swans are made of old tires, which have already served their time, and thanks to us they got a ticket to a new life, bringing joy to others. True, one dad works in a car service. And it was he who helped us get the tires and do most of the work. Because it is not realistic to cut a swan out of a tire with a knife, it is necessary for a Bulgarian to cut metal, as in modern tires a metal mesh that does not yield to a knife is laid.

Let us dwell in more detail on the question of the swan from the tire, how to make your own copy. In general, the tire is torn according to a standard pattern, but you can bring your own by adding fantasies, deciding what will be your swan from the tire, how to do it.

First, the tire must be carefully released from the rim. Then we turn to the very manufacture of the swan.

The prepared tire is put and marking is applied on it. It is necessary for our swan to be smooth and symmetrical. Then, with a sharp knife, the tire is cut along the lines drawn. It's quite easy to perform, provided that your knife is sharp enough. Time will take no more than 20 minutes.

Then the chisel or bulgarian must be broken hard part of the tire. It is at this time that a man's hand is needed, preferably, able to handle such an apparatus. Thanks to this, the head and tail of your swan will be executed. "This procedure takes no more than 10 minutes, as a result, cuts must be made where the extreme side parts are the same and the middle part is a little narrower, with the middle part cut off on one side.

The last two parts must be turned inside out so that turned out the expanded wings. With the help of wire and unlimited imagination, we bend the neck of our swan in several places, then we perform the bend of the tail.

It is important to treat the head and tail of the swan so that all sharp edges that children can get injured can be removed. Fix the neck, tail and wings can be halves of the packing ring. The advantage of using it is that there is no need to use a metal rod or wire.

The final stage is painting your masterpiece. You can paint in white, but look good silver or bronze swans. Do not forget to mark the beak by painting it with red paint.

As a result of our labors, the children's playground came to life, and the kids looked at the works made for them with our hands with delight and joy. I hope that as a result of your work you will get a unique swan out of a tire, how to make it, you now know.