AutomobilesCars

What should I do when the clutch pedal fails?

The driver's life is connected with constant tension. It can be confirmed by any motorist. And besides the dynamics of traffic and traffic jams, which certainly does not increase the mood of car owners, there are a number of other situations that can turn an ordinary trip into a long and nervous torment. To such troubles it is impossible not to not include the cases when the clutch pedal failed. Of course, this is a big hassle, because in addition to the trip, the owner is waiting for the evacuator's call and the bill for the service station. In this article we will consider why the clutch pedal fails and how to reach the nearest technical center by car without calling a tug.

Causes

The reasons for which the coupling fails, there are a lot. This can be a torn cable, the presence of air in the hydraulic drive system, and even a broken clutch fork. In the first case, the fault can hardly be eliminated on its own, but for that matter, in the future you need to carry a cable with you. There is simply no other way out of this situation. When the clutch pedal fails due to the hydraulic drive, only the bleeding of the clutch can resume the previous characteristics of the car . When the bushing is broken, only a complete replacement can solve it. Also worth noting is one more reason why the clutch pedal fails. It can be a flew or burst spring. If this part simply changed its location, you can repair the car on the road. But when she completely got into trouble, only the tow truck, which will take your car to the maintenance station, can help you.

How to get there by such a car to the garage?

When the clutch pedal fails, the drivers feel that the car's further path can only be carried out in tow, but this is not entirely true. If you have gasoline left in the tank and you are familiar with certain driving skills (now we will tell you in detail about them), then you can get to the house or to the SRT with your own power. How to do it? To start, you need to turn off the ignition and put the gearshift lever on the first gear. After all these steps are done, you can turn the ignition key again and while pressing the engine, press the accelerator pedal to prevent the car from stalling. Further you will feel that the car is slowly moving. When engine speed reaches a maximum (this is at a speed of no more than 20 kilometers per hour), in any case, do not switch to higher gear. Remember that switching gearbox speeds without clutch is fraught with breakage of the entire gearbox. And it costs much more than the tow truck. Therefore, you need to go only in the first gear. If this trouble overtook you during a distant trip on a deserted track, it is better to hire a tug, because at a speed of 20 kilometers per hour to the nearest city, you can hardly get there in 5 minutes. Well, if the clutch pedal fails in the city, this instruction can be used in full.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.