What a roller paint the ceiling with water-based paint: the right choice and technique

Today, many solutions to the problem have been developed, which consists in painting the surfaces with water-soluble compounds. One of them is the use of a roller, it is important not only to choose the right coating, but also the tool itself, which can be made of different materials. You can apply the usual brush, but the brush strokes will be too noticeable, which is unacceptable for finishing the ceiling. The surface will look unevenly colored. However, to refrain from using the brush is not worth it, since it will be needed to paint hard-to-reach places and corners.

Roller Selection

If you are faced with the question of which roller to paint the ceiling with water-based paint, then we should consider the tools available in the modern market. The working part of the roller can be fluffy, velor or foam rubber. Prices for these products are not too different from each other and can mislead the consumer. Despite this, the tools are different, and the selected roller will be able to affect the quality of the staining.

If you are tormented by the question of which roller to paint the ceiling with water-based paint, then you should pay attention to the experience of most consumers, which indicates that the product with threads that form the pile is the best product. Foam roller can not be compared with a fleecy product because of its high ability to absorb paint, so that the composition accumulates on the ceiling surface and can form bubbles. But the velor tools are able to capture not so much paint, so the described problem is excluded.

If you need to paint a large surface area, you should give preference to a wide roller, which will allow you to complete the work in a shorter time. The length of the pile of the paint tool will depend on the variety of the surface to be treated. If you decide to use a flame retardant paint, then it's best to use a foam or fuzzy option. If you are still thinking about which roller to paint the ceiling with water-based paint, then it's best to prefer a fleecy product whose threads are of medium length. In this case, it will be possible to achieve not so impressive absorbency of the paint, so you can easily apply the composition to the surface of a large area. But a short pile may completely leave unpainted places.

Advice of a specialist

When the indoor ceiling has a rough structure, you need to pay attention to products with a long nap, only with it you can cover the entire invoice by filling the grooves. The tool made of foam rubber is not recommended for this, it also applies when the handle is bolted, as such solutions quickly become unusable.

Quality check

Many home masters before starting repairs think about how to paint the ceiling with a water-based paint. It is important when you visit the store yourself to be able to check the tool for quality. To do this, it is clamped in the hand, and the working part must not be deformed. It is important to pay attention to the seam, which should not have a clear joint. If it is still available, streaks may be left on the surface during staining. Experts advise to pull villi, which should not be pulled out. Otherwise, on the surface to be painted there will be elements that spoil the appearance.

Preparation of tools

When the roller for the ceiling is selected, care should be taken to ensure that there are utensils for working with the tool. If you want to achieve a positive result, it is best to abandon the use of a conventional bucket. Use only a special tray that is designed for painting surfaces. Among other things, it is necessary to prepare a telescopic tube, which will eliminate the use of scaffolding. After all, not every home master in the arsenal has ladders and other similar devices. But with the help of a telescopic tube you can easily reach out to hard-to-reach places.

In more detail about each kind of roller: foam rubber

Those consumers who think about which roller is better, consider all options, among them a foam product should be highlighted. Its main advantages are low cost and general availability, as well as the opportunity to choose a product from the material of different invoices. Experts advise to pay attention to the density of foam rubber, which causes resistance to mechanical stress. By purchasing such a tool, you should be prepared for the fact that the paint consumption will be increased, because, as mentioned above, foam rubber absorbs the composition in an excessively large volume. If you have to handle a large area, the surface can acquire an uneven shade, because the paint will absorb into the foam and will form bubbles.

Characteristics of a roller of velor

Solving the question of which roller is better to paint the ceiling with water-based paint, you can consider velor products that are suitable for smooth and flat surfaces. This material is synthetic and is cheaper compared to mohair rollers. The undoubted advantage of velor is the resistance to negative effects of solvents. But the wizard can experience some inconveniences when using this tool, which are expressed in poor absorption of the paint material. For a smooth and monophonic coating, you will have to dip the tool into the solution too often, this can be inconvenient.

Features nap roller

The ceiling can be painted with a roller using a tool that has pile. For hard surfaces, it is best to consider a product with long threads. The material at the base will affect the cost. Thus, rolls made from natural felt and fur will be more expensive compared to artificial substitutes. The quality of the fur coat will determine the results of staining, so you should not save on the instrument. As practice shows, the pile has some advantages, such as the ability to correct the absorption of paint, perform decorative painting works, as well as the possibility of creating a uniform coating of porous and rough surfaces. It is worth remembering that the decorative works are best obtained using a roller with a short pile. And if you prefer natural material, then the tool will serve more than one repair.

Methods of work

Before painting the ceiling with water-based paint, it must be diluted to the desired consistency, following the recommendations in the instructions. The most often required addition of water in the amount of ten percent. Be that as it may, it is necessary to mix the composition yourself using a drill with a nozzle. Do not need to apply for the work roller that used to apply the primer. For water-based paints, it is best to use a new tool or replace the working part. If before you there is a question on how to paint a ceiling with water-emulsion, then you should know that it is not necessary to dunk the instrument completely, it needs only to be dipped slightly. The composition should be evenly distributed over the surface of the fur coat, for this purpose the roller is rolled on the pallet, but not along the surface of the ceiling. If you can not wet the working part of the roller evenly, then you will come across unpainted areas where spots will form.

Advice of a professional

Before you start painting the surface of the ceiling, you should practice on some part of the wall or piece of drywall. This will allow you to avoid many mistakes.

Workflow

Beginning to paint the ceiling is necessary only during daylight hours, it is best to use additional illumination. Start work is necessary from the far corner or from the window, moving towards the door. The paint should be applied as evenly as possible, the process should not be delayed. The application should be carried out in parallel strips, each next should overlap the previous one by 100 cm. On the surface, the paint should be rubbed as carefully as possible, making sure that it does not dry out on the edge.

When working the master is not recommended to tear off the roller from the surface of the ceiling, and the consumption of the composition is controlled by pressing. From time to time, you need to move away from the area to be painted to see if the unpainted zones have formed. If such errors have already turned out, then they can be corrected by the technology of grinding the painted surface with a large number of emery paper. Each next layer is applied perpendicular to the previous one, and its application should be carried out only after the paint has dried completely.

Conclusion

Each master before starting work should think about what is needed to paint the ceiling in the apartment. Among the tools should be allocated a roller, capacity, as well as a brush. It is desirable that a set of replaceable coats is attached to the roller. This will simplify the work, as well as eliminate the need to re-visit the store if the fur coat is damaged. You can choose a roller with limiters as well as regulators. The presence of such auxiliary elements increases the cost of the instrument, but facilitates the process of carrying out the work.