Installation of lath ceilings: technology of work

Ceiling racks have been very popular lately. The fact is that they are simply fastened, differ in beautiful appearance, and also can have different colors. In addition, the design of such ceilings allows you to equip the point suspension. They very decorate the room, make it stylish, modern and original. There are not only different in color racks. Of these, you can collect a whole picture on the ceiling. However, one thing to remember is one nuance. Rack constructions require high ceilings.

The advantage of this finish is that it does not need to be painted, glued or whitened. For the arrangement of the ceiling, special narrow panels are used, which are attached to the framework of metal profiles along the guide rail. Elements are often made of aluminum, and then covered with several layers of decorating film.

The ceiling ceilings for the kitchen, bathroom, corridor, hallway and other rooms can be used. Their advantage is that they do not require special care, are safe, do not lend themselves to burning, are resistant to moisture, corrosion and rust. Thanks to a special coating, the bars can reflect light very well. The advantage of this finish is its reasonable cost.

Installation of railing ceilings is easy. To begin with, it is desirable to prepare the base. Naturally, the surface should be well cleaned and leveled. This is necessary in order to not need a large number of metal profiles and did not have to suffer for a long time with the arrangement of the structure. To work, you need racks, profile, wall angle, tire, decorative rail, screws or dowels, as well as a knife for cutting elements and a screwdriver.

Installation of lath ceilings begins with the arrangement of the structure. First a walled corner is attached. The next step is to mark the ceiling using the level. The corner should be installed only on one wall so that the edge panel can be installed. Now you can freely engage in the installation of guide rails. At the same time, the distance between them is no more than 120 cm. Next, there are mounted suspensions, on which, in fact, the panels will be installed.

Now the installation of rack ceilings is to secure the laths. Naturally, before doing this, you need to measure and cut off the element of the desired length. At this stage, holes for spotlights are provided . Racks are fixed mainly with the help of latches. After installing the last element, a decorative strip is screwed to the wall.

If the elements are dirty during operation, they must be wiped or washed. Now you can install the fixtures. It should be noted that the installation of rack ceilings can be done independently. Practically no difficulties the process will not cause. It is only necessary to get acquainted with the correct technology of the work, to stock up with material, tools and patience. The only thing that should not be done during work is to hurry! This process will not take much time. So good luck to you in your endeavors!