Tulips from beads. Tulips from beads - weaving scheme

The most spring, the most moving flowers, without which it is difficult, for example, to present on March 8, you can not only grow in a pot or buy in a flower shop, but also make it yourself. Tulips from beads to collect simply, it is necessary only to show a little bit of perseverance and patience.

Preparing materials

Before you start creating a spring bouquet, you need to take care of materials and tools.

So, we will use clippers in the process of work to snack the wires. And also put the scissors nearby - we will cut off the strings or floristic ribbon.

We will need a floral tape to decorate the plant stem. In principle, you can do without it. Instead of the material mentioned, the coil of green threads also fits.

You will need a tube of glue (universal or PVA).

Since we are going to make tulips from beads, then, accordingly, we need this very beads. You need to buy exactly the same beads. You can even take two-color. For example, red and orange. Or blue and white. Then the tips of the petals will be slightly different in tone, like real flowers. And for the leaves you will need green "small pieces of glass." Be sure to get a yellow bead and a black bugle. Of these, you will collect pistils with stamens.

And of course, can not do without wire. You will need a coil of fine jewelry wire for weaving leaves and petals, as well as a stiffer base for the stalk.

Create petals

We begin to weave tulips from beads with the creation of petals. From the coil of a thin wire we shall separate two pieces of wire. One is 20 centimeters long, and the other is 45. We twist them together.

For a short section, we will draw 5 light beads and 6 darker beads. On the other (long) end of the wire we put on 4 light beads and 9 dark beads.

Now a long piece of wire gently twists through a short, with strung beads. After this, create a reverse row of 4 and 9 beads. Again, we slightly cling to the base of the short wire. We repeat the operation several times. As a result, we should have six rows on both sides of the central segment. Do not forget to add in each row the number of beads. Only then we will get almost real tulips from beads. The scheme of weaving on this technology involves the production of three small inner petals and three outer ones.

For outer petals we use dark beads. In the base it is necessary to place 12 beads, on both sides we gain 4 more rows, gradually increasing the number of beads.

Stamens and pistils

We have the petals of future flowers on our hands. Now we will create the cores that will be placed in our tulips from beads.

The scheme of weaving is very simple. For stamens, you need to cut 3 pieces of wire into 20 centimeters. We take a piece in hands, we string on it two long glass tubes and one bead. The bead is a pommel, we pass the wire back through a row of glass beads. We make two more stamens.

Now the yellow pestle is on the turn. For him, cut off the wire piece of 20 centimeters, we will draw three beads on it, fitting them to the middle of the segment. Carefully twist the ends of the wire and pass them through three bugles.

We connect together the stamens and the pistil. To the latter, in a circle, we fasten the black antennae of the stamens.

We are engaged in foliage

Elements of inflorescences we already have. But tulips from beads have more leaves. Let's make at least one.

The technology is similar to the one we used to make petals. You need to cut off two pieces of wire: smaller and bigger. Then you need to twist them together. On the central rod we type green beads. We will start from 4 centimeters. The first rows finish neatly at the top of the main row. But the following should not go to the top. Hook the wire for the fourth or fifth bead from the top of the previous row. As a result, you will get teeth. From each side it is necessary to string five rows.

In the final, put the bead on the central wire, let the wire pass through the main shaft. The sheet is ready.

Collecting flowers from beads

Tulips left to collect. We take our heart in hands. To her, you need to tie three inner petals. At the same time, the light part is at the bottom, at the base of the flower. The outer petals are arranged so that they overlap the joints of the inner petals.

Remains of wires are straightened, for stiffness we put a piece of more rigid wire. It's the turn to use a floral tape or a green thread. She needs to tightly wrap the stem. And somewhere in the middle of the stem will need to add a sheet. At the tip of the stem, fix the winding with glue, so as not to get messed up.

Embroider flowers

If you prefer not a voluminous weaving, but embroidery with beads, tulips can be depicted on a piece of cloth.

For beginners, the purchase of a ready-made kit will be a good choice. It has everything you need to work: color beads, threads, canvas, needles, frame for the finished picture. Sometimes such sets are accompanied by an instruction showing how the embroidery is made from beads.

For skilled craftsmen it is not difficult to create your sketch. And already it is filled with life. Embroidery with beads is similar to the technique of cross stitching. It is necessary to move forward with straight rows, laying out a pattern of multi-colored beads. For the picture, take a smooth, identical in size and structure beads. Otherwise, the whole drawing will lead.

Tulips from beads are collected in bunches. From them create voluminous decorative panels. An interesting option - the creation of hand-made jewelry. Tiny tulips can act as pendants, earrings. Their strict and elegant inflorescences can be adorned with lorials. These are long cords from beads. Their ends are not connected, as in necklaces, but are free. Lhoriati gently tied around the neck, like ties or scarves. Here at the ends of such an ornament the spring tulips can blossom. Very unusual and elegant look bracelets and massive hryvnia with embroidered small beads flowers.