The project of the house is 10 to 10. One-story house 10 for 10 of timber, foam blocks

The project of the house 10 for 10 one-storeyed is rather widespread variant of the decision of a housing question. In this way, you can equip your own area behind the city line, without cluttering the structure with additional tiers.

Why you are alone

In cottage villages are more often found at home above 1 floor. This is due to the saving of space on the land, because the two-tier dwelling has a smaller external perimeter. It is convenient for large families, where the upper levels are occupied by rooms for young household members.

Now one-storey houses are gaining popularity. They choose families with a small number of people and with elderly parents who, due to age or health, are uncomfortable going up to the second level.

The design of a house of 10 to 10 one-story means the use of a large building area, so this option is optimal for owners of large land holdings.

The question of convenient placement of premises is actual. When the rooms are on the same level, they are much more convenient to navigate and navigate.

Advantages

When choosing the number of storeys at home, you should carefully weigh the pros and cons of a decision. Consider the arguments in favor of a single-storey building with dimensions around the perimeter of 10 by 10 meters.

• Convenient layout within a single storey.
• Sufficient area to accommodate the required number of rooms (10 * 10 = 100 m ² ).
• An acceptable and optimal solution for elderly and young children.
• There is no risk of falling from the ladder when lifting and starting.

The dignity of the house in terms of residence is obvious. Convenience is the determining factor for many hosts.

Disadvantages of single-storey cottages put into a separate category does not make sense: if the developer has determined for himself the degree of convenience, then, most likely, on this decision he will stop. The rest is technical nuances that will be solved during the design and construction.

Material selection

Projects of a single-storey house 10 * 10 of timber or stone materials are presented in various variations: with an attic, veranda, with an attached garage, a bath-house - lots of solutions. Any one can be made of modern building components at the request of the customer.

The house from a bar is most approached to the nature: the material differs ecological purity, thus high efficiency of operation. Wooden buildings are able to serve for centuries - this is proved by the architectural monuments of our ancestors, preserved to our time in excellent condition. Modern methods of processing logs and timbers increase the service life of the material - chamber drying, application of special impregnations, additional lining of facades and walls - improve the performance characteristics of the tree.

Projects of single-storey houses of foam blocks 10 * 10 meters are common among fans of solid solutions. Such a cottage is unpretentious in operation, and construction is relatively quick. Penoblok - a product of a kind of lightweight concrete, it is characterized by high efficiency: it perfectly preserves heat due to its porous structure, is resistant to chemical influences, does not damage from microorganisms and fungi, it serves more than 100 years.

If you compare the presented options, the design of the house 10 for 10 one-storey from the bar - economical, and from the blocks - more solid. According to the technical characteristics, they practically do not differ, the choice of material depends on the personal preferences of the builder.

The project of brick single-storey houses 10 * 10 meters is rare enough, because it is not effective: a large thickness of walls and special insulation is needed. This requires a lot of material investment and labor. It is advisable to build a cottage from a beam or blocks and to make the facade facing brick.

Technological features

As already mentioned, for a single-story house there is no sense in allocating shortcomings to a separate category, as they are rather related to engineering and building nuances that are solved at the design and erection stage of the facility. Next, consider these features by comparing with houses of higher storeys. An exception, perhaps, can be considered the need for a large area, necessary for building. 10 * 10 meters make up a hundred square meters, because the option is only suitable for owners of a large plot.

Constructive decisions

The design of a 10 to 10 storey house does not require a solid and powerful foundation, since the load from one storey is not significant. However, it does not matter, brick, block or paved walls are chosen for construction.

The concrete monolithic foundation for the house will require about 1.5 times more consumables, in comparison with the two-tier version. This difference is due to the relatively shallow depth and the less overall structure of the base. The expense of reinforcement will not be so great: the impact of a relatively lower load from one level does not require a powerful gain.

The walls for the house can have a minimum permissible thickness, since only the roof rests on top of them. The volume of materials for erection is equivalent to a two-storey dwelling. The number of overlap elements also coincides.

The design of a house of 10 to 10 single-story simple or complex configurations requires a roofing device of a large area. The complexity of its perimeter further increases the cost of work and the amount of material.

Layout within a single storey is most effective, as the lack of a staircase makes it possible to use the area as much as possible.

Warming and maintenance

The issues of technical maintenance at home require a special approach. Maintaining positive temperature, conducting communications, access to networks should be carefully thought out.

The heating of a single-storey house must be accompanied by special insulation of the floors and walls, as the warm air is well distributed in the vertical direction. In this regard, the cubed, higher houses serve much easier. Therefore, the thermal insulation of structures should be arranged in a thicker layer.

The implementation of communications in the process of construction is somewhat simpler: there is no need to break through the floors for pipes to the second floor. Within a single tier, the circuits can be arranged efficiently enough to facilitate their servicing.

Access to possible damage within the volume of a single-storey house is much easier than in a two-story building: the height of the building is lower, it is not difficult to get into the attic or the roof. Cleaning and care of the premises is much easier to carry out within the same plane, rather than run up and down the stairs.