ComputersEquipment

The computer does not see the hard drive, what to do and how to treat it

Quite often, ordinary users have to deal with situations when the computer does not see the hard drive. At such moments a person can quite embrace panic and anxiety for all the important files that are stored on a personal computer. Undoubtedly, the failure of a hard drive is one of the most serious problems that can occur on a personal computer. In addition to the fact that the hard drive itself goes out of order, so also with it the data evaporates.

So, what can cause the computer to not see the hard drive. Firstly, it is quite possible that the loops that are responsible for power and data transmission are out of order . Secondly, the case may be in the video card, and thirdly, it is likely that the hard drive itself went out of order.

First of all, of course, you should try to use the unused loops, alternately changing them in order to be sure to exclude this option. To understand that it's not a motherboard or a hard disk, we need another computer or a known working hard drive.

It is also worth paying attention to the presence of a jumper (jumper) on the hard drive itself. If it is, then you need to exclude the fact that the hard disk is determined by the computer as a slave device and simply does not load the operating system from it.

Just in case, you can try to reset BIOS settings to default and check if the hard disk is detected at all. If the hard drive is not visible in the BIOS, then, most likely, it went out of order.

There are situations when the hard disk is visible to the system and the operating system is even loaded, but it does so for a very long time and with periodic failures. This means that the necessary sectors of the hard drive simply can not be counted, and further use of the disk will not lead to anything good. The best option in this case is to save the data as soon as possible to another medium and check the disk with special utilities. If they confirm the fears, the hard drive will need to be changed immediately, in order to avoid the moment when it simply refuses to start up, and to restore the data on it you will have to turn to specialists who, in addition, will take money for it.

If the computer does not see the hard disk due to a failure of the latter, the user is faced with the question of whether to restore the data or not. Some think that repairing hard drives is a cheap procedure that will ensure a long work and restore all data on the hard drive, but that's not entirely true. Firstly - hard disk repair will be very, very expensive, secondly - it will not provide data storage, and thirdly - no one knows how long a repaired hard disk will last. The thing is that hard drives are not originally intended for repair, because manufacturers are more profitable for the waste devices to be discarded, and users go to the store and buy new ones. Especially since the repair and purchase of a new disk will come about in the same price. It's a little easier when the computer does not see a removable hard drive. Back in the last few easier than the usual models.

Another thing is with the restoration of data. In this case, specialists will transfer all information from the damaged disk to other media, but the hard drive will not work at the same time. This procedure will not cost the user too much, but the recovered data can again be downloaded to a new hard disk and use them further. So, when "My computer" does not see the hard drive, it's not a reason to regret the lost data, because in most cases they can be restored. Remember this.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.