Spraying PPO ECOTHERMIX

The technology of spraying polyurethane foam has been around for a long time. In the US, thermal insulation was produced in the 1960s. At us only now people began to choose such kind of warming. And there are a number of reasons:

• High efficiency of heat retention
• Savings on heating-cooling
• Environmental friendliness
• Seamlessness
• Quick installation

Now let us consider in more detail what is sprayed heat insulation

Due to the fact that the thermal conductivity of polyurethane foam is very low, namely the lambda index of 0.027, the heat or cold inside the room does not go outside, and the outside does not penetrate into the room.

Accordingly, here we turn to the discussion of the second item, "saving money on heating-cooling" and these are not empty words. As a unit of cold is twice as expensive as a unit of heat. This applies primarily to refrigeration and storage facilities. And here is just very effective sprayable insulation EKOTERMIKS.

Speaking about the ecological compatibility of Ecothermix, it should be noted that the insulation with polyurethane is absolutely ecological and has all the necessary certificates.

Seamless polyurethane foam coating, this is one of the main advantages of its use, since in this case the bridges of cold completely disappear. It is also very important and fast installation Ecothermix. For example, for a working shift, the installer is able to make the spraying of the PP 400-500 m2.

For example, it is especially effective to use this kind of insulation in private housing construction in the insulation of the attic floor. Warming of the attic can be done by spraying directly on the roof covering. If you have a metal tile, it is better to spray on the vapor barrier, and if the flexible tile is of the type CertainTeed, then on the OSB base.

Another area of extremely effective application of polyurethane foam spraying Ecothermix are industrial refrigerators and warehouses with a constant temperature. It should be noted that the PPE Ecothermix has a different density. For warehouses and refrigerators, it is recommended to apply spraying with a density of at least 25-30 kg per m2. This layer of thermal insulation will keep the temperature in the interior constant.

To carry out spraying PPU mobile team leaves, usually two people. The spraying is done by the operator, and the second person helps to carry the hose through which the components A and B enter the machine from the machine in the machine, the two components are mixed and emitted into the sprayed surface inside the spray gun. On the surface of polyurethane foam, Ecothermix increases 30 times, forming a smooth, bumpy surface.

Compare PPU spraying on the effectiveness of insulation can be superfluous with a heater of extruded polystyrene such as PRIMAPLEX or TEPLEX, but then, as we have already said, bridges of cold can not be avoided, as the above materials are slabs. The PPU can also be used on the basement parts of buildings, where until recently only plates from extruded polystyrene foam have been used. As for mineral wool, its plus is that it is not combustible and has NG certification, and PPU has G1 certification, that is, a low-combustible that does not support combustion. This is critical for large or public projects under construction. But on all other building designs PPU spraying is the best way of warming.

As for the cost of polyurethane foam spraying, ECOTERMIX, it is approximately 500-700 rpm per m2 with a thickness of 100 mm.