PVC panels are laminated: description and application

PVC laminated panels have gained popularity among home craftsmen due to their qualities: durability, aesthetics, and ease of installation. When installing such material, the master will not have any difficulties, since the panels do not assume the need for special skills. The panels are fairly simple to maintain, and during the installation are easy to process. They can be cut as well as drilled. After completing the works the room acquires a unique look. The walls become resistant to the negative effects of moisture and temperatures.

Material Features

PVC laminated panels have the appearance of plates, the main component of which is polyvinyl chloride. If you cut the canvas, you can see a structure that resembles a honeycomb. The face is protected by a decorative film. During installation, it will be easy enough to dock the panels, since each of them is provided with a tongue-and-groove connection. This allows you to successfully hide the docking seams. The finished surface is smooth and perfectly smooth. The material looks great, and in the stores of building materials it can be selected from a wide range. PVC laminated panels can be combined with other materials, which allows you to receive unusual design solutions.

Durability and moisture resistance

Use such material for a long time. It is not prone to rot and corrosion processes. Installing canvases is quite simple also because they are light in weight. This quality simplifies the process of transportation and unloading. Panels are well under the influence of moisture, so they are often used in rooms that have a high level of humidity. The material is practical, it is easy to wash, and if necessary, you can replace the damaged items. If you are interested in the issue of environmental friendliness, it is worth noting that the described panels meet these requirements.

Features of the installation

If you decide to choose PVC panels laminated for wall finishing, you will initially need to prepare some tools, namely: drill, nails, screws, wooden bars, as well as a hammer. The bars should be fixed on the wall surface in such a way that a frame is formed. It will subsequently be installed panels. If necessary, the canvas can be cut using a construction knife. Such a task will inevitably arise in the course of installation before the master, because you will have to dock the panels in the corners or in complex areas of the room. In order to adjust the size of the canvas, you must first make a marking using a ruler and a pencil. With the help of these tools on the front side of the panel, it is necessary to draw a straight line along which the incision will be made. It is not worth to go deeper into the surface when carrying out these works, since the canvas is cut only from above. Next, you need to put it on the corner of the table, and then break it.

Mounting recommendations

Laminated PVC panels, photos of which can be found in the article, can be used for finishing the ceiling. In this case, you can not be afraid of flooding from above. To carry out such work, you need to purchase panels that will ensure a minimum number of ceiling joints. In this case, it will be possible to ensure the maximum tightness of the surface. With the help of such a finish it will be possible to hide defects and communications in the formed space. This method of finishing the ceiling allows you to save, because you do not have to work on removing the unevenness of the ceiling. If a good ventilation system is installed in the bathroom, the PVC "Vek" laminated panels can be glued directly to the wall surface. This will save space in the room, which is especially important for bathroom apartment buildings. To carry out such work should prepare a silicone or acrylic adhesive. However, such an approach is advisable only if the walls are perfectly even.

Filling of seams

After the installation has been completed, a mortar must be prepared to fill the joints. Do this with a rubber spatula or float. Surplus composition will need to be collected and re-applied to the seams. After the solution has dried a little, its excess needs to be cleaned from the surface of the panel with a sponge. The latter will need to be pre-moistened in clean water. If you have chosen laminated PVC panels for the balcony, then you need to install the same method. In this case, the material assumes the possibility of using a warming layer. After the installation has been completed, and the adhesive and joint filler will dry, it is necessary to wipe the finish with a flannel cloth.

Installation of laminated panels

If laminated PVC wall panels are used in the role of wall finishing , every nuance of installation must be taken into account. Can be placed horizontally, vertically or diagonally. Each of these methods has its pros and cons. The diagonal technology will leave most of the waste after the completion of the work. This will increase the cost of work. If the panels will be strengthened by adhesive composition, they should be installed vertically. The composition should be applied with horizontal stripes, the width of which is 6 millimeters. The distance between them should be equal to 20 centimeters. After the panel is pressed against the surface, in this state it must be held for a few seconds. If you have chosen laminated PVC panels for the balcony, a photo of this finish can be seen in the article. Regardless of where the described lining is installed, the frame can be used. From the correctness of his position, the evenness of the final wall will depend. Analyze the location of the elements of the frame can be using the building level. The distance between the beams or profiles should be equivalent to the width of the panel. Thus, the inter-panel seam should be located in the middle of the bar.

Recommendations of the master

When choosing the finishes, the different colors of laminated PVC panels will allow you to create unique design solutions. However, it is important to ensure the strength of the fastener, which will also ultimately affect the aesthetics. Depending on what material will be the basis of the frame, you can use a stapler, screws or nails to install the panels. It is necessary to screw or drive them into the slats that make up the elements of the frame, to distance them from each other by a distance of 25 cm. This will ensure that the fasteners are unobtrusive. If the walls have a significant unevenness, then you can get rid of this problem by the method of placing the bars under the elements of the frame.

Conclusion

At the last stage it will be necessary to install the appropriate fittings according to the type of moldings, corners and skirting boards. These elements provide additional fixing of the finishing material. With their help you can give the walls or ceiling a complete look. Fittings will help to decorate all joints, external and internal corners, as well as edges. Observing all the rules of the work, you will be able to achieve the desired effect, which involves the creation of perfectly smooth, aesthetically attractive walls. In addition, you can enjoy the unsurpassed quality, which is guaranteed by the manufacturer for several decades.