Pros and cons of the zero-resistance filter. Installing a zero-resistance filter

The zero resistance filter is the part that adds to the car engine when performing tuning. These elements are quite accessible to the consumer and are easily installed in the motor. They have different options for execution, and also look decent. Studying all the pros and cons of the zero-resistance filter, you can determine the need for mounting it to the car's motor.

If you want to add a few "horses", then you know that almost every process of engine tuning and tuning does not pass without a trace. And in the general plan of the set of processes this is a noticeable increase in power performance. Any tuning of the engine can not do without modifications to the air supply system, on which the efficiency of the motor depends. The zero-resistance filter, whose reviews are mostly positive, due to their excellent air-permeability, affect the formation of a fuel-air mixture.

Appointment

Simply put, the main function of any air filter is to clean the air of various unwanted impurities. This element must protect the piston group and cylinders from possible ingress of dust and moisture into them.

At the same time, having good protection, the engine of the car loses its power. Due to the dense paper filter material, the flow of consumed air collides with a serious resistance and passes through the filter worse. Therefore, with a high resistance, the power of the power unit is also lost. And at the moment when it clogs, the fact of loss of power indicators is especially noticeable. The zero filter has a certain design that contributes to high-quality air purification, but at the same time significantly reduces the resistance of the air flow at the inlet, which in turn increases the power. Typically, the installation of a zero-resistance filter occurs on all sports and racing cars, in order to add their motors a few additional horsepower. Given that this element of engine equipment can be easily purchased at auto parts stores, many motorists install zero filters on the motors of their cars.

Maintaining it in a suitable condition

Like any other element, this filter needs to be cleaned. To do this, it must be dismantled and carefully cleaned with all the surfaces of the element using a special brush. Next, you need to apply a special cleanser on the surface of the filter and ten minutes to stand until it is absorbed completely. After this, the filter element should be washed and rinsed under running water.

Drying the part is not recommended with the help of various heating devices and devices, since it is possible to deform the element. After drying, mount the zero resistance filter on the carburettor.

When operating the car under normal climatic conditions, it is recommended to rinse every ten thousand miles of the car. When using transport under less favorable conditions, cleaning is carried out every five thousand. After washing about twenty times, the element should be replaced with a new one, since the working resource is completely exhausted.

The advantages of the zero-resistance filter

The increase in the amount of air supplied through it provides the power plant with the large amount of oxygen necessary for the normal combustion of the fuel mixture, which ultimately increases power.

It is necessary to note the fact that by installing a zero-resistance filter on the VAZ, you should not expect a decent power increase. On engines with small capacity, the increase in power performance is almost imperceptible, unless, of course, the diagnostic indices in the digital equivalent are considered on special stands. And, for example, on units with a volume of 3 liters or more, the factor of increasing dynamic performance is quite noticeable, it is on such engines that all the positive qualities and advantages of such an element of air purification are revealed.

The second positive quality of the filter can be called the change in the sound of the engine running from under the hood. Due to the design features of the zero player, the sound, characteristic for sports cars, is heard.

The appearance of the engine also changes. Some motorists establish such an element precisely because of the aesthetic appearance and aggressive sound.

disadvantages

The minuses of the zero-resistance filter are insignificant, but they do exist. First, it is the need for constant care of the state of the filter element. The second negative factor can be called poor-quality air purification from impurities. Often this can happen if the element is inexpensive and less quality than expensive counterparts.

Pros and cons of zero-resistance filter at VAZ

One of the simple ways of tuning cars VAZ models is to install a zero filter on the engine. At the same time the price of the issue is not very high, and the installation can be carried out independently. You can mount the zero-resistance filter VAZ-2110 on the motor in the following way. To begin with, disconnect the rubber pipe from the air flow sensor. This can be done using a conventional screwdriver. Next, you need to remove the sensor mount from the body of the standard air filter and remove the element itself. Then it is necessary to disconnect the negative wires from the cylinder head. To the engine body we fasten the mounting bracket. We fix bolts of fastening of the gauge of air to a fixing arm of the filter. Install the sensor on the part, and finally connect the air sensor connector. How does the zero-resistance filter look in the engine compartment?

Photos indicate that this device fits perfectly into the overall appearance of the power unit and gives it some aggressive character.

Filter K & N

Products of this manufacturer have firmly established themselves in the automobile market and have a huge number of their admirers.

The zero-resistance filter K & N was developed in California by the company of the same name to help increase power values. In terms of their characteristics, the products of this manufacturer largely outperform their counterparts in competitive firms. According to the developers, its installation on the engine will increase the power indicators by as many as four "horses". The element can be used for a long time, and when the car is used in ordinary urban conditions, it can be cleaned only after 80 thousand km of auto run.

The air filter of zero resistance K & N is made of the purest cotton.

The main parts of the element consist of several cotton layers, which are located between two aluminum plates. To increase the performance of the filter, it is impregnated with a special oil, and its design features ensure a long-lasting and reliable operation on any engine.

All products of this manufacturer have a warranty service life, which, according to the company's engineers, is one million miles.

Kinds

There are two types of zero filters, which differ from each other in a geometrical form and way of installation. The first are cone-shaped. This type of filter is very effective, as it is located under the hood without an additional protective cover. Also, its advantages increase with the use of smooth nozzles with a minimum number of bends, in contrast to corrugated. The second - the elements installed in the staff seat.

Installation

How to properly mount a zero-resistance filter? Reviews of motorists say that for this it is desirable to pick up the most "cold" place under the hood of the car. This is to ensure that the incoming air is as cold as possible.

It is undesirable to place the filter next to the radiator and the exhaust manifold, because of this, the efficiency is significantly reduced.

To protect the element from possible contact with motor oil, it is recommended to install a protective cover on it.

What in the end?

Having considered the pros and cons of the zero resistance filter, the owner of the car will make a decision about the installation of this element. If, nevertheless, you decided to equip the engine of your "iron" friend with a filter of this design, then it is necessary to carry out selection and installation of the zero-wheel with the correct approach to this procedure, so as not to damage the condition of the power unit. Professional racing cars are equipped with such a product in standard order, because on their powerful motors, its effect is very noticeable. When the car moves at high speed, the airflow creates a vortex in the intake tract, practically turning into a small hurricane. Due to this factor, a vacuum moment is created in the system, with which the zero filter perfectly manages, straightening the air flow.

The probability of dust entering the engine cylinders is very high. For racing cars, this is immaterial, since almost after each competition their engines are subjected to repair and replacement of the piston group.

Conclusion

Pros and cons of the zero resistance filter depend on the quality of the execution and the materials used in the manufacture of such, from the type of the product itself and the engine of the car. Therefore, the final solution for installation depends only on you.