Plastic panel beds with own hands: description, instructions and references

On the eve of the dacha season, it's time to think about seedlings. We suggest you familiarize yourself with the types of fences for beds. Why, from what and how can they be done?

What you need to know before you break the beds?

To plants feel comfortable and well-bred, and it was convenient for you to walk and perform garden-garden work, you need to follow the recommendations regarding the optimal kind of beds.

• The optimum width is eighty to ninety centimeters. Two or three crops can be planted on this site.
• The length of the bed is allowed any and depends on the size of the garden and the placement of paths. But it is recommended that the shortage is not more than four or six meters.
• It is good to make beds high. Let them rise by ten to fifteen centimeters. Then the probability decreases that the garbage from the path and the seeds of grass that grows nearby will get to the bed.

What for it is necessary to fence beds?

One of the main purposes of fencing is to prevent one species from interfering with another.

There are a number of other advantages of fencing:

• The garden land is used as much as possible functionally;
• The process of weed control becomes easier and more effective;
• The appearance of the garden is much more aesthetic;
• There is an opportunity to make comfortable paths;
• It is more convenient to fertilize the soil depending on the type of crop planted;
• Easier to organize and group seedlings.

And here comes the question, when you decided to create a fence for the beds - from what to make the skirts?

What types of fences exist?

As materials of the fencing for flower beds and beds with their own hands quickly and budgetarily use such materials:

• metal;
• plastic;
• tree;
• slate;
• Stones and cobbles;
• concrete;
• Wicker fences;
• plastic bottles.

Still it is possible to buy ready fences, but it is very expensive.

Metal fencing is easy to install. But this kind will not last long. Also, the disadvantage is that the metal needs to be treated with special means, it can be injured, and it also heats up easily in the sun.

Fences made of wood were often used in dachas, but this is an expensive option. Even such fences also need to be treated against dampness and pests, but this does not help. After some time, the tree must be partially or completely replaced.

Slate is popular, because often the owners of suburban areas remain pieces after overlapping roofs. On durability, it is better than metal and wood, and does not deform during operation.

Decorative stones and cobblestones are the most expensive option of fencing. But you can use also improvised breeds, if you have them. Their minus is their size. Therefore, it is better to use stones for flower beds, and not for beds.

The most popular today are beds of plastic panels, built with their own hands. They have a lot of advantages, thanks to which more and more truck farmers make a choice in their favor.

Types of fences made of plastic

A very common type of plastic fencing is a curb tape. It is sold in rolls, the height of which varies from twenty to fifty centimeters. This tape is flexible and easy to install. It is easy to install and remove if necessary.

Also, this kind of fencing made of plastic, as a garden designer, is becoming more and more known. Its appearance resembles wooden hemp. And to install it, you need to spend only a few minutes. To do this, simply water abundantly the selected area and press the ground into the ground, not forgetting to connect its edges.

Plastic mesh is in less demand, but such fences can be found on beds.

The most common type of fencing is made of plastic - panels. They are convenient and practical. Also in this regard, good plastic panels, which remained after the repair work. Then the cost of fencing the beds is almost zero.

The appearance of the fence made of plastic

Design beds with their own hands on the cottage can be done different. This task is simplified if you buy ready-made panels. Their appearance resembles a low fence, and the color palette is diverse.

If you decide to make a fence for beds of plastic panels, then after installing them, simply paint the right fence with a new fence. The paint can be taken moisture resistant or special, for street work. Suitable and the one in which the main fence and elements of the house or barn are painted. The ideal option is to choose a paint for plastic.

If you increase your budget for purchasing plastic panels a little, you will be able to buy fencing in the store, the appearance of which very well imitates various expensive materials. Thus, you can have a fence for the garden bed of precious stone, wood and so on. In this case, such a fence will be much more practical than its prototype. For example, a white fence made of plastic will cost about 900 r. Per meter.

As for the molds, the plastic panels are easily deformable. They can be bent as you please, thanks to what on your site can be not only the usual rectangular flower beds, but also beds of unusual shapes: round, oval and so on.

How to install a curbstrap?

The procedure for the installation of plastic fencing is as follows:

1. Determine the length and width of the bed.
2. Cut off the correct amount of tape and join the edges with a joiner stapler.
3. At the installation site, dig a small narrow trench.
4. Set the curb in the trench.
5. Fill the tape on both sides with earth and tightly ground the ground.
6. If you have a length of the bed reaches more than two meters, then for the stability of the plastic border support it with metal or wooden pegs. They need to be staggered: one in front, the other inside.

How to install a plastic mesh?

To ensure that the plastic mesh is not deformed, follow the following installation instructions:

1. On the perimeter of the bed, dig in metal or wooden pegs. It is desirable that the distance between them is about a meter, then the grid is not deformed.
2. If the height of the grid does not suit you, then make a narrow trench. Then the excess part of the fence can be hidden under the ground.
3. Attach one end of the net to the first peg using strong wire or special screeds. This must be done at least in two places, it all depends on the height of the fence.
4. Well pull the net around the perimeter of the bed.
5. At the end, again, secure the plastic mesh on the peg.

Plastic panel fencing

Why do gardeners increasingly prefer a plastic fence? It's all about its advantages over other species.

Plastic panel beds are easily assembled by their own hands, and their installation does not require much effort. And still such a fence will last for many years, because with it there will not be that which is so characteristic for metal and wood. It will not rot, it will not cover with mold, fungus and rust, it will not decompose in the ground. And because of the fact that when installing plastic panels are buried in the soil, the probability of weeds falling on the beds is reduced. It should be noted that the plastic does not emit any harmful substances, and the soil is not contaminated. Water and fertilizers, which treat plants, will not flow out of the beds.

Another undoubted plus fence of plastic panels - a great variety in the creation of forms and decor.

Fencing for beds with your own hands - how is the fence made of plastic?

As mentioned above, such fencing is very easy to install, even if there is no experience.

Instructions for installing beds from plastic panels with your own hands:

1. Make measurements of the bed. You need to know the width and length.
2. Make the necessary notes on the plastic panel.
3. Proceed to cutting pieces of plastic. Do this carefully, without damaging the material and not injuring yourself. It is better to use a small saw or a large clerical knife. The plastic is easy to cut, so do not apply a lot of force. It's enough just to measure the right size, draw a line of the cut and hold it with a knife. If necessary, repeat the incision. Then you need to lightly press the cut line. For one bed, you need four pieces of plastic.
4. Dig a narrow trench along the perimeter of the bed. Its depth can be arbitrary, but not less than four centimeters. If the height of a bed of plastic panels with your own hands should be small, then you do not need to shorten the material. Just make the trench deeper.
5. Install panels in the trench and dig them on two sides. Ground the earth. If you bought special plastic panels, then they come with pegs, which connect the sides of the fence. If you used plastic left after repair, then put special corners on the joints.

Reviews about plastic fencing

In their majority gardeners positively characterize plastic fences for beds and beds from panels.

Most often, the choice is reduced because of the low cost of the material. After all, for the money that will go to buy the necessary number of plastic panels, it will not be possible to purchase as much slate, metal or decorative stone.

Also truck farmers prefer plastic because in its installation it does not need certain knowledge and skills. Therefore, even those who have never done anything like this can design the fence.

Another plastic fencing dacha owners like that with their help you can create different height beds. If you want a low flower garden, then put one panel. If you need a high bed, then just add a second one. This is easy to do thanks to the special rails at the edges of the panel.

Based on all of the above, we can conclude that in the garden areas are increasingly possible to see fenced flower gardens and beds with vegetables and herbs it is plastic panels.