Non-professionals wishing to mount garage gates with their own hands

Sometimes the complex construction of the product frightens lay people. But sectional garage gates with their own hands can be assembled and mounted, if you follow the rules and instructions. Of course, for this you need to have the skills and skill, have some experience and knowledge.

In order to collect garage gates with your own hands, you need to follow the rules. First, you should have original drawings. Secondly, you need to be able to correctly read them. Third, you can not save on the quality of the details.

Want to understand yourself how to assemble a garage gate with your own hands, remember the safety precautions! If you do not adhere to it, you can disable the car, injure yourself or injure other people, not to mention the fact that incorrectly installed gates will not perform their functions and the car can be hijacked.

To ensure reliability, the factory production kit is best suited. Moreover, a detailed assembly instruction is attached to it. This will help to make no mistakes by mounting the garage gates with your own hands, or to detect and immediately correct them.

The tools necessary for work are measuring instruments, drill, drills (pobeditovye), a puncher, a screwdriver, fastening materials. Before you begin the installation of the gate, you need to make sure that the wall and the opening of the garage will withstand them. If this is not so, it is necessary to carry out work to strengthen them. To strengthen the wall can be a metal frame, taking into account that from the opening to the ceiling should be 30 cm, and on the right and left - 45 cm.

Work begins with the production of measurements and marking on the wall. Then on it vertical and horizontal guiding profiles will be mounted , limiting the movement of sections. This stage is of great importance, it is especially important to withstand accuracy, because the slightest skewing or backlash will lead to the fact that the gate will not function. Therefore, it is necessary to recheck the dimensions several times, check the accuracy of verticals and contours, and also the density of fitting all the parts. It is important to know that during installation Do not use the wooden pegs or mounting foam in any way. For sealing, only pre-fabricated metal plates of different thicknesses should be used.

The guide parts must be fastened in the order specified in the instructions. A section of the door leaf you need to collect, starting with the bottom. After mounting all the sections, make sure that the upper part and the latch fit snugly against each other. As a rule, this can be achieved by adjusting the upper brackets. Balancing springs are attached after all control elements and accessories have been mounted. They must be installed in such a way that the lifting ropes are constantly taut.

At the very least, the fastener of the electric drive and the travel stop of the sections of the fabric are made, if these elements are included in the purchased set. After the end of the installation, the installation of all parts and sections with a professional building level is checked. Then check the operation of the gate. Installing the garage door by yourself, all operations must be done accurately and in the exact order that corresponds to the instructions.

Performing assembly work, you must adhere to safety rules. It is necessary to wear work clothes, which does not constrain movements, protective gloves and helmet. When drilling works, safety goggles are required, and a respirator is used to not inhale the building dust. All tools must be serviceable and reliable. The upper parts of the hammers should be firmly attached to the handles by means of sealing wedges, and the wooden handles should be pulled off with special rings.