Mixers on the side of the bath: advantages and features of use

The bathroom is a must in any apartment. Naturally, it should not only provide the opportunity to wash, but also help to relax the body. If you want to make this room original and unusual - attach the mixers to the side of the bathtub. To date, such plumbing is not an exclusive and is used more and more often.

It should be noted one feature: the mixers on the side of the bath are mortise, because on its surface or in the wall they can not be inserted. As for the appearance, it also happens different. It is impossible not to mention the functionality of such products. For example, an additional effect can be a water flow in the form of a waterfall, a diode illumination (with different shades). Another advantage of the mortise structure is increased reliability, especially if the water pressure in the pipes is strong enough. In addition, such a mixer is very convenient to use, since it is always at arm's length.

It should be noted that this design is very beautiful and makes the room exquisite, unique. To install faucets on the side of the bath is quite simple, they do not occupy additional space. In addition, the hose from the shower can also be hidden, and it will not spoil the interior.

The bathtub with a mixer on board is a new step in the design of the room. However, the mortise structure has a certain flaw - a high degree of wear in the shower hose. However, modern materials for manufacturing sanitary ware are more durable and resistant to erasure. And during the installation should be as cautious as possible, it is good to isolate the pipe joints and tighten them tightly with clamps (nuts). The fact is that changing the mortise structure is a little more difficult than walling. Naturally, it should be said about the fact that the cost of such a product is higher than the standard models. However, the quality of construction is considered very high. Naturally, her choice should be approached wisely.

Mounting the mixer on the side of the bath is as simple as possible if both manufacturers produce one. That is, in the bowl already provided holes for hoses and cranes. If you do not have such an advantage, and you have bought the presented mixer separately, then you will have to work a little. Although it is not desirable to make the holes in the bath yourself. In this case, it can be damaged or cracked.

In principle, the procedure itself is not complex and does not require specific tools, however, install a faucet on the side of the tub should a specialist. It is he who can guarantee competent installation with observance of all necessary norms, and also will provide a hermetic connection of all elements. If you yourself do the work incorrectly, then, apart from any damages to the plumbing, you risk not only getting difficulties with the water supply, but also flooding the neighbors.