Liquid wallpaper: consumption per 1 square. M, application

Liquid wallpaper, consumption per 1 sq. Km. M of which you must take into account even before purchasing the goods, are a kind of decorative plaster. Among the ingredients you can find cellulosic fibers and silk fibers. The first component acts as a by-product of the woodworking industry.

Recommendations

In order for the composition to acquire a certain color, decorative fillers and pigments, granules and all kinds of sparkles are added to it.

Apply the mixture to be using a trowel, spatula or float (like plaster or putty). The main advantage of this type of decoration is the possibility of its application to the surface of any complex shape. Compositions can be combined, forming from them various patterns. As a result, it is possible to obtain a layer that is similar to high-quality wallpaper. The surface is soft and warm to the touch. Liquid wallpaper, consumption per 1 sq. Km. M of which will be written below, have their shortcomings. One of them is a high cost. In addition, the preparation of the surface must be carried out before applying the application.

Consumption

The consumption of liquid wallpaper on 1 m2 can vary. It depends not only on the characteristics of the mixture, but also on how even the walls are smooth. Important and skill of the worker. If you are a professional, then the expense will be minimal, whereas a beginner is likely to spend more product. Liquid wallpaper, consumption per 1 sq. Km. M which is about 200 grams, can be applied manually or with a special spray. This value is correct if you do not use the technique in the work. The thickness of the layer can vary from 1.5 to 2.5 millimeters. When the master deals with an unprepared surface, which has irregularities and troughs, it will encounter an increase in flow, since with the help of a mixture you will have to level the errors.

If you apply a gun using a gun, the consumption per 1 sq. Km. M will be reduced. Thus, 140 grams of dry composition will suffice for this area. Thanks to the use of an atomizer, you can control the thickness of the layer, which will turn out much less. Coverage will lie as evenly as possible, and the master will be able to save. If you want to achieve the most positive result, and also save liquid wallpaper in a dry form, then it is recommended to paint the surface of the walls beforehand in the color that wallpaper will have. The gun will run smoothly if you watch the mixture from time to time. For this, the composition should be diluted in accordance with the instructions given by the manufacturer.

Method of application

The consumption of liquid wallpaper per 1 square meter will allow you to understand the volume of the composition to be purchased, so that there is no need to visit the store during the work. To do this, it is important to calculate the area of walls to be trimmed, removing the area of door and window openings from the resulting value. Further, the figure is multiplied by the material consumption, depending on the application method. The surface should be well prepared, the substrate should be made uniform, strong enough and free from swells, potholes, and also depressions that exceed the value of 3 mm per meter of surface. The substrate must have a uniform or minimal moisture absorbing capacity. If there is no possibility to paint the walls in the color that the wallpaper will have, then white paint can be used. Experts advise to remove all old finishing materials by the type of paint, wallpaper, as well as exfoliating elements of the plaster.

How to save money

The consumption of liquid wallpaper per 1 square meter can be significantly reduced if you repair all the unevennesses that have remained from the removed screws, screws, nails and other elements made of plastic or metal. If pipes or fittings protrude on the surface, they need to be sealed, but it is recommended to use a layer of putty laid in the thickness of 2 millimeters. As an alternative solution is the smearing of irregularities and errors in the surface of the oil paint.

Advice of specialists

After you became aware of the consumption of liquid wallpaper for 1 square. M, and you have got the composition for cooking, you can start preparing the mixture, but you can initially think whether it is worth it to level the surface perfectly. Professionals do not tend to make the foundation as smooth and smooth as possible. If there are extensive protrusions and depressions on the surface, and the wall has a slope, it is extremely difficult to eliminate such construction shortcomings.

Sometimes liquid walls are applied to such walls, and as a result, the textured plaster does not give any flaws. Thus, you must start from your own possibilities, as a complete leveling of the surface can cause large expenses. It is best to coat the surface with plaster on gypsum base (as for partitions or plasterboard walls). It will not be enough just to cover the joints between adjacent sheets. Once the surface is level, it is covered with a primer, for this, a deep penetration composition should be obtained. Its application is carried out in two or three approaches, between which it should be kept for about 3 hours. Only after that it is possible to start work, where a thicker putty will be used, which is used as a substrate for liquid wallpaper. It often uses a water-based or façade paint.

Preparation of liquid wallpaper

In modern interiors, you can often find liquid wallpaper. The consumption per square meter of this composition was mentioned above. If you know it, it will allow you to exclude overruns and avoid the acquisition of the composition in larger quantities than required. Prepare a liquid mixture in advance, which is why it must be done at the priming stage. Sometimes the components are packaged in separate packages, but some manufacturers simplify the task of the masters by mixing the ingredients together. In the first case, the contents of all the packages are poured into a large container, and then thoroughly mixed. Components should not be crumpled; on the contrary, they need to be swollen. Decorative additives like pellets and glitters are not recommended to mix in dry form with glue and fibers, they should be added to the water after and mix, and then pour the base of the wallpaper. This will give an even distribution of the components.

Application process

If you decide to choose liquid wallpaper for decorating walls, what is the consumption of this material, you should ask why you need to read the instructions. If it is not represented, you can follow the information from the article. To apply the finished mixture, you can use a spatula from 18 to 80 centimeters, a trowel, a metal / plastic grater or an atomizer. For this material special graters are provided, which differ from the standard ones in that they have a somewhat narrowed web. They are often made of transparent plastic, which allows you to effectively control the process of smoothing. This helps when making applications from different types of wallpaper.

The process should not cause any particular difficulties, it is similar to the application of putty, in some ways even easier. The solution should be collected with hands or a small spatula, and then put in portions on the wall. The tool grinds the mixture over the surface. You should strive to get a layer whose thickness is 3 millimeters.

Conclusion

Liquid wallpaper, application, the expense of which should be controlled by each master individually, should also be laid in the corners, for this, leveling is carried out in the direction from the corner. Then the movements should be normal.