Liquid for electronic cigarettes by own hands (at home)

To date, many former consumers of tobacco products have switched to a popular novelty - electronic cigarettes. Manufacturers of the device offer their customers a wide range of brands, a variety of shapes and a wide price range. However, there are people for whom the creation of such a cigarette with one's own hand is a matter of principle. In this article we will answer the frequently asked question: how to make liquid for electronic cigarettes yourself? The photos shown here illustrate the popularity of ES and the variety of their assortment.

E-Cigarette Device

First you need to understand what the product consists of. This is the case, atomizer, battery, cartridge and microchip. Each of the listed parts can be purchased at a specialized store. However, it is much cheaper and more interesting to make parts and liquid for electronic cigarettes by hand from improvised materials. For example, a small flashlight or a medical syringe can be fully adapted to the housing of a future cigarette. As a battery suitable for finger or little fingers. The atomizer body can be replaced by an ordinary mouthpiece. To create a full atomizer you will also need a ceramic cup and a wick. Metapen and spiral of nichrome thread are not mandatory details.

How to assemble a cigarette?

The assembly of an electronic cigarette is easy. First, fix the wiring with two screws inside the housing of your atomizer, then connect them to the battery contacts. A twisted spiral of nichrome thread must be securely attached to the opposite ends of the screws. If desired, you can also adjust the button to control the heating, but this is not necessary. Excessive details can only complicate the process, and after all, our task is to make a body and liquid for electronic cigarettes with our own hands at home, that is, in such a way that everyone can cope with the task.

The main thing is to follow the assembly instructions exactly, after which all components, previously fastened together, are neatly placed in the main body of the product. Check whether the electronic cigarette is properly assembled is simple enough. If the air comes from the back of the atomizer when exhaled, you have managed to create a quality housing and liquid for electronic cigarettes by hand.

What is the liquid for ES?

Before we talk about the process of its creation, it is necessary to clearly understand what it is. First, it is designed to refill the cartridge of an electronic cigarette. It is due to the composition of this liquid during smoking that steam is produced that simulates the smoke of ordinary and long-standing tobacco products. There are several types of such filling, and they differ depending on the percentage of nicotine content. This is another plus, because you can buy or make liquid for electronic cigarettes by yourself without nicotine at all or regulate its concentration. It can be of different tastes, which is important. Everyone can pick up the taste he likes and change it if he's bored. In special stores, cartridges are sold, that is, tanks, where the smoking mixture is stored. The volume of such cartridges can be different, but on average it will replace you with 30-40 ordinary cigarettes. After the cartridge is finished, it is often thrown out, however people who have experience in smoking ES say that it is not necessary to do this. It is much more economical simply to fill it with a "medicine" (as they often call a gas station), especially since it is possible to make this liquid for electronic cigarettes by oneself.

Composition

It's time to figure out which components are part of the standard liquid composition for an electronic cigarette. The classic version includes distilled water, propylene glycol or food grade glycerin, purified nicotine in liquid form and flavor additives. As you can see, the ingredients are not too complicated, they are quite easy to get. It is extremely advantageous to make a liquid for electronic cigarettes by hand. "Where there is a lot of steam, there is a quality refueling" - this is the main law, because the composition is aimed at imitation of real tobacco smoke.

Propylene glycol

It is a clear liquid, although it has a weak but distinct odor. The consistency is slightly viscous, has a sweetish taste. This component is allowed and is widely used by many countries as a food supplement. Speaking about the food industry, you can easily find propylene glycol in the composition of sweets, favorite oatmeal cookies or biscuit rolls. Energy and many carbonated drinks also contain this component. It is also used in the manufacture of cosmetics, as it has an emollient and moisturizing effect, which is extremely useful in the creation of various types of shampoos, lotions, etc. As for our topic, the question of how to make liquid for electronic cigarettes at home, You can safely answer: without this component - in any way. Here, due to its hygroscopicity, propylene glycol allows to keep the necessary humidity level for long-term storage. It also performs sterilizing, preservative and antimicrobial functions.

Glycerol

Viscous, clear and colorless liquid, which completely dissolves in water. The component is often used as a food additive, used to make extract of tea, ginger, coffee and other plants. It is widely used in the production of mustard, all jelly, alcohol-free drinks, and vinegar. For those who at least once wondered how to make the liquid for electronic cigarettes thick, the answer is found: will help glycerin. It is widely used in industry to dissolve all kinds of drugs and increase the viscosity of liquid elements.

Nicotine

In fact, this alkaloid, contained in large quantities in plants belonging to the family of Solanaceae. This includes tobacco, tomato, potatoes, eggplant, etc. Due to its hygroscopicity, it is easily mixed with water. Nicotine has a sharp unpleasant smell and taste. With frequent use causes both physical and strong psychological dependence. It is important to remember that nicotine is a real poison, which can easily lead to death. Therefore, if you are considering how to make liquid for electronic cigarettes yourself, remember: only dilute nicotine is used for refilling. Getting on the skin even droplets of this substance in its pure form will certainly provide you with serious health problems. If your ultimate goal of using ES is to quit smoking completely, have patience. Do not immediately abandon nicotine cartridges. It is important to clearly understand how to make liquid for electronic cigarettes. In mg, step by step, gradually reduce the nicotine content in the gas station. Only this way you can forget about your addiction.

Flavors

In order to impart taste and aroma to the modern liquids, special flavors identical to natural ones are added . Of course, it is more pleasant not just to smoke an electronic cigarette, but to enjoy the smells of your favorite flowers or, say, fruits. In order to manufacture liquid for electronic cigarettes by hand, use such flavors that are not toxic by inhalation and do not leave fumes and oil contaminants on evaporation. Popular essential oils here just do not fit.

It is extremely difficult for amateurs of ES today to surprise anything, because the stores offer the widest assortment of various additives and fragrant fillers. Those who are at first difficult to refuse from the usual cigarettes, refueling with a classical tobacco smell is suitable, and exotic lovers can enjoy the tastes of fruits, chocolate, vanilla and mint. For those who are sophisticated, there are "potions" with a taste of alcoholic beverages, for example, gin, brandy or liquors. Such a variety of fillers gives a lot of options for how to make liquid for electronic cigarettes, choose the taste you like and control the nicotine content. What can be more convenient?

Is cooking self-explanatory?

The refueling for ES is done with several purposes. First, for the sake of reducing costs, because the liquid bought in the store, will cost you several times more than the one you make yourself. Secondly, you will be absolutely sure that the refueling does not contain anything superfluous. Another advantage is the fact that you will have the opportunity to create a unique liquid with such strength and taste qualities that suit you and, probably, are not available for sale. The main reason why fans of electronic cigarettes often resort to independent mixing of liquid, of course, is the price. Experienced smokers argue that the price of shop refueling is more than 5 times.

Procedure

1) Propylene glycol and glycerin form the basis of filling, these components must be mixed in the proportions optimal for each specific case and added to distilled water.

2) Decide on the desired concentration of nicotine. For beginners, it is best to buy diluted.

In order to correctly calculate the number of ingredients, it is necessary to determine the approximate number of cigarettes you smoke daily, then multiply this figure by the content of nicotine in one cigarette (this you can read on the pack). For example, you usually limit one pack a day, that is, 20 cigarettes are multiplied by, say, 0.8 mg nicotine (contained in 1 piece), we get 16 mg. This means that you should start with a liquid of 16 mg and gradually reduce the concentration.

3) The remaining 10% is flavors.

So we answered the question that was asked quite often today about how to make liquid for electronic cigarettes yourself. The instruction, as you might have noticed, is not anything super complicated. The main thing is to follow it clearly and take the process seriously.

Precautionary measures

In the process of creating fueling, we are dealing with a simple, but still with a chemical reaction, so you should be extremely careful. Once again we remind you that when you buy pure, not diluted nicotine, you put your own health and the health of people around you at risk. All purchased ingredients should be stored in a sealed package, in places where children or pets are not likely to stumble on them. Be responsible! Do not think that the electronic cigarette is absolutely harmless, so you can smoke it in unlimited quantities. Do not forget that the liquid also contains nicotine, which harms your health, know the measure in everything. Do not purchase liquid components from questionable sellers or acquaintances. Trust only the quality marks on the packaging and be sure to pay attention to the degree of purification of the USP. Numerous studies have shown that all components in small amounts are safe for human health.

Some against

Not all support the independent manufacture of fuel stations for ES, explaining this by the fact that an inexperienced person can harm his health by ignorance or negligence. According to many, it is best to entrust this matter to professionals who know exactly what and in what proportions to mix. If you are not sure that you are able to follow the instructions clearly and do not confuse anything, you should not take risks. In such cases it is better to overpay and buy ready liquid in the store, thus saving yourself from unnecessary worries and worries.

Conclusion

Summarizing, we formulate several defining moments:

1) The classic liquid for an electronic cigarette contains 5 components. These include propylene glycol, nicotine, glycerin, distilled water and flavors.

2) In the process of creating or selecting a liquid, it is important to pay close attention to the percentage of nicotine content, the ratio of propylene glycol to glycerol and the non-toxicity of the flavors used.

3) It is not difficult to prepare a liquid at home, you just need to have all the necessary components and follow the instructions clearly.

4) Calculate the proportions in accordance with the calculator of liquids.