Learn how to lay the tile on the floor

When placing the ceramic tile on the floor, check its appearance and caliber in advance. This is due to the fact that products of the same lot do not always match in all parameters. In the process of acquaintance with how to lay the tile on the floor, pay attention to the necessary tools and materials. Their choice should be correct, because it can affect the quality of the coating.

To work, you will need the following: ceramic floor tiles, cutter, special glue, saw designed for this material, cut-resistant gloves, roulette, level, pencil and primer. In addition, prepare a spatula and a scraper with rubber nozzles, a cord, a water tank, a cloth and a sponge.

Many of us, when we start repairs, are interested in the question of how to lay the tile on the floor, because this process is not very simple and requires compliance with the technology of laying. Initially, prepare the foundation. Typically, this is a concrete coating, but often there are cases when the surface is the previous ceramic or vinyl floor tiles. To comply with the laying technology, first thoroughly clean the substrate, regardless of the coating option. Carefully follow the coverage of the area you are working with. Putting ceramic tiles is necessary in conditions of perfect visibility to accurately position each of the products. For this, you can use lamps and spotlights with directional light.

How to lay a tile on the floor? First, its placement on the surface is considered. To do this, draw a mark in the middle of the room, and then draw a line through the cord. Do the same procedure on the other side. The resulting lines must cross each other. Then remove all the old skirting boards and door jambs. In accordance with the drawn lines, lay the tile on the floor. Choose the most suitable location of the product, so you do not have to cut it, because it will look unaesthetic.

The glue must be applied from the center of the room, in one of the corners formed by the lines drawn. To apply the composition smoothly, use a spatula and a spatula. If the glue is not applied smoothly, the tile may crack, since its adhesion will be weakened. Slightly press down the product to firmly fix the compound at the base. Follow this procedure, moving along the line until the floor under the tile is completely closed. For proper joint measurement, use special spacers. After the glue dries and hardens, conduct the grout. Sealing should be correct, as this will improve the performance of the tiles. Cleaning of each of the sites is done by a scraper, then you can apply a special mixture to the slits. Its excess is removed with a moistened sponge.

After learning how to lay the tiles on the floor, pay attention to the fact that as a final stage of the work, it is polished with a dry cloth. This material does not require special care during the operation, but for its condition, be sure to follow.