Leads for the feeder. How long should the leash be on the feeder?

Every angler knows that there are no unimportant details in fishing. And the feeder is no exception. Usually talk about feeder gear does not go beyond discussing fishing rods, reels and feeders, and about leashes and hooks are often simply forgotten. Many take on arms a simple, but too gross rule: the longer and thinner the leash, the more bold the fish will take the nozzle. This is true, but each pond requires a special approach. The choice of the leash is completely dependent on the conditions of catching and peculiarities of the place. Let's figure out what points should be paid attention, choosing or assembling leashes for the feeder.

Selection of line

To date, each company that produces fishing lines, has in its range of special leash series of lines. If possible, you can try the leash lines of English brands, which were the ancestors of the industry of feeder gear production. Among such companies are Drennan, Fox and Preston. They make a line of the highest quality, only here its price, in the opinion of many expert fishermen, is still overstated.

It is worth remembering that these firms, as well as others, do not make a line at their enterprises, but order it from Japanese factories. Therefore, there is a high probability that the Preston line, for example, is produced on the same equipment as Shimano. So it's better not to spend serious money on the leash line from the world brands. Moreover, there are quite a lot of decent quality products on the market, the price of which is much lower.

The line for the feeder lead should be strong, stiff enough not to twist, and, of course, it is good to keep the knots. The latter factor is especially important in cases where hooks with a scapula are used. Among fishermen, the leash lines of companies such as Colmic and Shimano are trusted. They have an average price and quite acceptable characteristics. It is undesirable to take absolutely cheap fishing lines for leashes, even if their quality is very nicely sung on the package.

Is it worth using fluorocarbon?

When the bottom in the place of fishing is covered with shell rock (a favorite place of bream parking), fishermen often have to change leashes, as they are quickly damaged. Partly this problem is helped to cope with fluorocarbon leashes. After all, this material is least exposed to mechanical influences. The question of its suitability in feeder fishing is rather controversial. According to many anglers, fluorocarbon is not suitable for the feeder, as it has high rigidity and alarms the fish. Nevertheless, as practice shows, the number of bites on a rig with a fluorocarbon lead is not less than with a simple line. On the other hand, the fluorocarbon leads for the feeder are much smaller. With all the advantages of this material, there is one drawback: it is inferior in strength to high-quality mono-woods. Here it is worth emphasizing the word "qualitative". A good monolesse with a diameter of 0.15 mm has the same strength as a fluorocarbon fiber line with a diameter of 0.18 mm.

Braid (cord)

Many novice feeders are wondering: can I make leashes for the feeder from the braided line? The answer is simple: it is possible, but undesirable. The difference between fishing cords and fishing line is strength and softness. It is because of the second property that they are unsuitable as feeder leads. When casting cords are often overturned, and when disguised, they get confused.

Thin is not always better

It should be noted right away that there is no unequivocal answer to the question, what should be the diameter of the feeder lead. Here everything depends on the conditions of catching. On the same river, the fish take a good bear with a diameter of the lead of 0.15 mm, on the other - no more than 0.10 mm. It all depends on the amount of pressure that anglers have on the fish on this or that pond. The fewer lovers of quiet hunting on the shore, the more bold the fish and the thicker you can put leashes. Conversely, when the load on the fish is large, it is worth giving her elegant gear.

The choice of the optimal diameter of the fishing line is affected by one more factor - the rod system. If the rod allows you to make a lightning sweep, the thickness of the leash should be slightly overstated, so that it does not burst sharp movement. The main line also affects the choice of the thickness of the leash. If it stretches well, the leash will not receive the load when cutting, if it is bad, it can tear. Therefore, when using non-stretchable lines, the leashes are thicker.

Sometimes the leashes for the feeder have to be changed right during the catching. For example, catching a duster on a tackle with leashes 0.10 mm, after another pushing bite the fisherman got a break. It turns out that the point of catching came bream. For him, 0.10-mm leash is thin. You need at least 0.14 mm. A lead on the feeder for crucian carp often becomes a victim of pushy carp. So the diameter of the leash is always variable. It is important to learn how to pick it up so that the tackle is as thin as possible from the point of view of maintaining strength in one place or another when catching a fish.

Length of the leash for the feeder

With a thickness dismantled, it's time to talk about the length. As you guessed it, you can not unequivocally answer the question of how long a lead on the feeder should be. The length of the leash, as well as its width, is determined by the conditions of the catch. Previously, it was believed that the fish is afraid of the feeder, so the leash must have a length in standing water to half a meter, and on the flow - and at all meter. However, research and underwater surveys have shown that fish are not at all interested in foreign objects appearing on the bottom. All her attention is focused on the stern. Therefore, it is recommended to start fishing with leashes 30 cm long, and then look at the behavior of the fish and its activity.

Be that as it may, working with a short leash is much more convenient. Therefore, even on the current, as a rule, enough length of a half-meter is enough. Someone may disagree, but practice shows that a short leash, all other things being equal, works better than a long one. This is not about the number of bites - it is the same, but about the quality of the cuts. It is much more convenient to make a correct cut with a short leash.

Yet there are times when the angler is forced to lengthen his leash. This measure is necessary in standing water, on lakes, the bottom of which is covered with a thick layer of silt. The trough plunges into silt and tightens the leash, which reduces the effectiveness of the tackle to a minimum. The length of the leash for the feeder in such conditions can reach one and a half meters.

Tackle with a long leash inconvenient to throw with a short rod. However, the fishermen came up with a simple way to avoid annoying hooks for the grass. Behind a back spread any dense film. When the rod is retracted, the leash simply falls on this material without any unpleasant consequences.

Color of leash

The color of the leash depends on whether the fish will see it in the water column. Lesku, as a rule, is made transparent. She does her job well and is invisible in clean water. But much better results are shown by the line, painted in shades of brown, blue, green and other natural colors for the pond. For example, when fishing in marshy small ponds, the green line works just fine, merging with muddy green water. The blue fishing line is perfect for fishing in clear river water. Well, the dark lines are not at all noticeable in the depth, where even in the day there is not enough light.

Hooks

Before talking about how to knit leashes for a feeder, it is worth mentioning one of the most important details affecting the result of fishing - the hook. As in any other kind of fishing, the main rules for selecting hooks in the feeder are:

1. The size of the hook is proportional to the size of the desired prey.
2. The color of the hook corresponds to the color of the bait / nozzle.
3. The shape of the bend is selected for the characteristics of the bait and the model of biting the fish.

Preparing for fishing

Fishing is always full of surprises and surprises, so you never know what leashes to the feeder you need to take. Fishing may require a variety of length and thickness leashes, as well as hooks of several sizes and shapes. If you try to anticipate all possible variants of events in advance, you will have to connect at least a hundred leashes. In this case, only a few of them may be needed. Therefore, usually anglers knit the right leashes directly during fishing. It takes only a couple of minutes, and with enough skill and even less. How to knit leashes for a feeder, consider below.

Knitting Leashes

So, having learned what feeder leashes are, it's time to figure out how to make leashes for the feeder with your own hands. It's extremely simple. First, you need to cut off a piece of the fishing line of the required length. To the desired length of the leash it is necessary to add 10 cm on both sides. These segments will be needed for the nodes. Now, on the one hand, you need to make a fastener for mounting the leash to the rigging. It can be either a simple loop, or a swivel or carbine. On the other hand, a hook is attached. That's all, the leash is ready. To prepare leashes for the feeder yourself, you do not need to be an experienced fisherman.

Conclusion

Every fisherman knows how to make a leash for the feeder. But not everyone approaches this question sensibly and takes into account all the major trifles. And it's bad, because the beauty of fishing is knowing the nuances. Successful fishing for you and harmonious communication with nature!