How to set up your headphones on Windows 7 easily and simply?

This article describes in detail the process of how to configure headphones on Windows 7 to a novice user. It consists of the following stages:

• Choosing an acoustic system.
• Connect an audio device.
• Installing the drivers.
• Setting up the software.
• Testing.

Each of them will be considered in the material you are offering.

Selection

At the first stage of how to set up the headphones on Windows 7, choose a quality speaker system. Now there are many devices of this class. The cheapest ones cost 5 USD, but the price of more expensive ones is several hundred dollars. For undemanding users, the products of the Sven or Sony trademark are excellent. But music lovers without a brand like Beats by dr. Dre just can not do. When buying new headphones, we pay attention to the sound quality, the reproduction of low and high frequencies. Well, we do not forget about the budget. At the same time, one must understand that it is impossible to achieve a sound from a cheap device of high quality.

Connectivity

At the next stage of how to set up the headphones on Windows 7, we perform the switching. There are two ways to connect the speaker system to a PC: using an audio jack in 3.5 mm and using USB. The first type of devices provides better sound quality, so it is recommended to purchase them. It can be equipped with one (only headphones) or two (microphone and headphones) pins. In any case, only a green connector is needed, which is installed in the socket (it can be located on the front of the system unit or on its back side) on the computer of exactly the same color. In some cases there is no color marking. In such a case, the image of the speaker system should be printed next to the proper socket. In it and install headphones on Windows 7 In this performance. In the second case, if USB is used, it is enough to find any rectangular connector and connect a sound device to it.

Drivers

Setting up the headphones on Windows 7 is also about installing the necessary software ie drivers. Without them, sound can not be played. First, we check their availability as follows:

• Go to the "Start", then - "Control Panel".
• Open the "Device Manager" by double clicking the left mouse button.
• In the opened window we find the speaker icon and open this item. We draw the attention to the fact that opposite to it and all its components there should be no icons (for example, a yellow triangle with a black exclamation point).
• If there is nothing, then you do not need to install the drivers - they are already installed, so you can skip this step and proceed to the next one. Otherwise, you need to find the necessary software, which is either on the CD-ROM of the motherboard or sound card, or on the official website of the device manufacturer on the Internet.
• Then install the drivers, following the instructions of the installation wizard.
• Close all windows and reboot completely our computer.
• After that, we check for the absence of frightening signs in the dispatcher and in the group of sound devices previously described. If nothing has changed, then you need to download the new software and repeat the operation again.

Customize

After installing the drivers, you need to programmatically configure the headphones on Windows 7. To do this, perform the following manipulations:

• We go to the "Control Panel" on the previously described method.
• Select the item "Sound" and open it.
• In the device list, double click on the headphone icon.
• In the window that opens, click on the "Levels" tab. On it, we set the amplification factor of the output signal at our discretion.
• We move to the "Advanced" tab. Select the playback mode. The higher the frequency, the better the sound quality. A similar situation with the profile. It is recommended to select "Studio recording" with a frequency of at least 96 000 Hz.

This completes the initial software configuration. Close all previously opened windows.

Testing

At the final stage of how to set up the headphones on Windows 7, you need to check the quality of their sound. To do this, go to the window "Sound" according to the previously given algorithm. In it we select the item "Headphones". In the window that opens, we move to the "Advanced" tab. On it you need to find the "Check" button. We make a single click on it with the left button of the manipulator. If everything is done correctly, then at first right in the right, and then in the left dynamics, sounds will appear first, and then stop. If this does not happen, we repeat everything anew. This completes the setup.

Instead of concluding

As part of this material, I described in detail how to configure headphones on Windows 7 An inexperienced user. Following the previously stated instructions, it is not difficult to perform this operation. So we take it boldly and do it.