How to uproot a stump: basic rules

All known methods for cleaning the site from the remains of trees can be divided into mechanical and chemical. The use of chemistry is an easy job, but takes a long time. Preparations decompose the stump from the inside into the trash or make it combustible.

Chemical methods of stump removal:

1. With the use of saltpeter. On the stump, holes of different widths and depths are drilled both from above and to the sides (from the side into the depth). In autumn, when the harvest around it is removed and everything is cleaned, we fill the holes up to the top with saltpetre. Some advise after wrapping the stump with a film so that water does not get into the preparation, others, on the contrary, recommend using water. Whichever advice you listen to, their meaning is the same: the solution periodically has to be poured as it impregnates the wood. While the stump is saturated with nitrate, oxygen also enters it. Then completely impregnated stump is dried. After drying a little, we plant a fire on the stump. Saltpeter in a complex with oxygen will cause profuse smoldering not only the ground part of the tree, but also the roots at the depth. Removal of stumps in this way is unacceptable if the soil is peaty. You can not fire on them, it can not be extinguished afterwards.
2. With the use of salt. Sprinkle with a large salt stump abundantly. Gradually, wood under the influence of granules will begin to break down. But, applying this method, it is possible to spoil the quality of the surrounding soil. Therefore, it is used, clearing the place for construction. Chemical methods are not widely used because it is a long process.

Mechanical methods

These methods imply the application of brute physical force and simple tools. Before taking this work, you need to represent the device of the root system of the tree. It can be of two types: friable and rod-shaped. Rod - the root of the rod goes deep, the pomaceous - branched root system. If you study all the known methods of how to uproot the stump, then you can compose one technology, adjusted for the circumstances. So, let's begin. From tools, we may need a shovel, a crowbar, a saw or a hacksaw, an ax, a winch. Using an iron rod, we determine the occurrence of surface roots. With a shovel, we remove the ground from under them and saw with a saw. If the stump is small, then, making the podpily on one side, you can try to put the tree on its side and chop off or saw off the root that goes to the depth.

How to uproot a stump if it is big?

Medium-sized roots are removed, like small ones, but using scrap as a lifting gear and the strength of two or three adult males. As an option - we dig a hole under a tree and wash the roots with water. Further on the standard scheme: saw, ax and brute force. Larger stumps are uprooted using a winch or special equipment. Using a winch, do not forget to create a foothold.

Technical method

If for some reason the above solutions to the issue of how to uproot the stump, you do not fit, we turn to the last method - the application of technology. This method - without manual labor and the use of chemicals. They are simple to ridiculous, but expensive. It is necessary to hire a tractor with a special attachment, and removing the roots of trees together with the ground part of the trunk will pass quickly and easily. If the heavy equipment does not pass, hire specialists. The devices available to them can carry a couple of men, so you do not have to release a large space. These plants will break the remains of the tree into chips not only from above, but also to a depth of 60 cm. As you can see, everyone can find the answer to the question of how to uproot the stump, at its discretion.