How to roof a metal roof: a simple answer

Building your own home is a difficult and very important occupation. And the question of how to cover the roof with metal roofs, arises in many. After all, often people prefer to do without the help of professionals, on their own. But the advice of experts is still worth listening to.

A few facts about metal tile

This roofing material is recognized as the most popular. This contributes to its strength, decorativeness, reliability. In addition, it has a light weight and is easy to assemble. If there is a need to reconstruct an old roof, then this is the most suitable material. The operating life of it is long enough - up to thirty years. But it if it is competently courted. Everything is so nice and wonderful that it's worth remembering the shortcomings. Among them, it is especially possible to distinguish noise generated during rain or hail. And if you do not follow the stacking technology, then you will hear even birds that walk on the roof.

How the roof is covered with metal tile: technology features

In order to correctly calculate the amount of material, you need to read the following data.

• The useful part of a regular sheet has a width of 1100 millimeters.
• The angle of the roof slope is not less than 140 °, then the overlap of the sheets will be one wave in width.
• If the previous indicator is less than 140 ^о , then the width should be two waves.
• From the bottom edge of the roof sheet output is ideally not less than 40 millimeters. And on the butt - about 30-40.
• The distance between the roof rafters does not exceed one meter.
• If you stack two rows of sheets, then overlap along the length you need to perform at least 150 millimeters.

So, when you perform a full roof measurement on the width and length of the pitched part, check it diagonally, using the above data, you can safely calculate the number of sheets of material.

Waterproofing and laying of sheets

If you do not know how to cover the roof with metal roof, then note that it is absolutely necessary to carry out hydro- and vapor isolation. This will ensure a long life of the roof. Its internal surface must be covered with a waterproofing film, then glued to it with a layer of thermal insulation, and a vapor barrier film placed on top .

So, we cut the roof with metal roofing. The process begins with the fact that you fix the curtain rod on the bottom board of the crate. Now you can fasten the sheets. So, if the roof is a hipped roof , then the laying starts from the top, and you should move down. If the roof is gable, then the sheets are installed from the end from the lower part.

The metal tile is fixed to the crate in the hollow through one wave using self-tapping screws. For cutting sheets you will need to use electric scissors, a disk saw or a hacksaw for metal. If the front door of your house is located on the sloping side of the roof, then you need to fix a snow barrier over it.

If you are wondering how the roof is covered with metal, you will be interested in how much it costs. The final amount will include the cost of sheets, skate, cornice, other related parts, seals, fasteners, installation work.

So, now you know how to properly cover the roof with metal roofing.