How to make a cap from a newspaper? Step-by-step instruction

In a hot time, the cap is a necessary accessory. But not always it is at hand. Creating origami, you can give the newspaper a second life and get the necessary thing. In this article, step by step, you will learn how to make a cap from a newspaper.

There are several possible options for making headdresses from newsprint. So, let's look at some examples. For production, you will need a standard sheet of newspaper or another paper, the size of which is not less than 53 X 53 cm. A cap made of a newspaper will not protect you from rain, but it will be a great help in finding yourself under the scorching rays of the sun. Its application is especially relevant in the garden or during outdoor recreation.

Classic cap from the newspaper with a visor

1. A square is made from a newspaper sheet. For this, one of the corners is laid diagonally. The lower part of the newspaper is superimposed on the resulting triangle and cut off.

2. The sheet is left folded at an angle of 45 degrees or folded. If everything is done correctly, a triangle is obtained.

3. The paper rolls over the wide side of the triangle.

4. The upper corner is bent to the center of the bottom of the previously formed figure.

5. The folded angle is raised, and the side lower parts of the workpiece are laid one on top of the other. By appearance, the resulting figure resembles a trapezoid.

6. One of the parts (located on top) of the raised angle is lowered down and tucked under the folded layers. It is necessary to press it more firmly for more reliable fastening.

7. The workpiece must be turned the other side toward you.

8. Then the rest of the triangle is laid down.

9. The model is turned 180 degrees. After that, the lower part is opened so that the inside of the future cap is visible.

10. Next, click on the sides to shape.

11. The tops are laid so that the view from the inside is exactly the same as the picture. The corners bend to the center and look at each other.

12. The last step is the formation of the visor. First, you must lay it on top, then bend it back, leaving 1-2 cm from the fold line.

Done! That's the whole instruction how to make a cap from the newspaper.

Simple variant without visor

This is an easy way to make a cap yourself.

1. Take a sheet of newspaper.

2. Fold in half, forming a rectangle.

3. The upper corners bend to the middle of the sheet.

4. They press well.

5. One of the lower parts is bent upwards.

6. The workpiece is turned over, with the second part done similar actions.

7. The lower part is opened, the headdress is given a shape.

Here is such a simple instruction that answers the question about how to make a cap from the newspaper with your own hands. The task is not difficult, even a child can cope with it.

Square cap

1. It is necessary to take a sheet of newspaper.
2. One of the corners bends to the opposite side, forming a square.
3. Repeat this procedure on the other hand, while the second diagonal is indicated.
4. The workpiece is bent diagonally and is turned upside down by the angular part.
5. The corners are laid with the underside to the wide part of the large triangle.
6. The model is turned over, the actions performed earlier are repeated.
7. If everything is done correctly, a visor is formed, which must be bent upwards.
8. To fix the shape, it remains only to bend the corners.

Conclusion

Ways to create caps-origami set, similar products are obtained original, not similar to each other. They can be both with a visor, and without it, square and round.

The article described only a few options how to make a cap from a newspaper without using scissors and glue. These methods are available to both adults and children. For babies, making paper headpieces is a fascinating and developing activity, and the right thing also turns out.