The design of the site is very important for the presence of tracks. They serve as an excellent decoration of the yard, with their help you can break it into functional areas, and even to walk along clean and well-groomed paths is a pleasure.
Before laying the paving slab, you need to do some preparatory work. At the first stage, it is necessary to mark out the places where the tracks will run. To do this, during the laying of the tiles, wooden pegs are driven in, between them a cord is drawn to indicate the boundaries of future tracks. Next, it is necessary to remove the soil (15-20 cm) from the planned sites, and this process directly depends on how to lay the paving slab with your own hands, you decided. If these are garden paths, the soil is removed so that it tilts them away from the house to create the necessary slope for water drainage. Places of laying tiles must be leveled, then proceed to the paving process. How to lay a sidewalk tile with your own hands, depends on the purpose of the tracks and the load they will carry.
Pedestrian paths are usually laid on a sand cushion, the thickness of which should be from 10 to 15 cm. The sand laid into the prepared trench is leveled, then abundantly spilled and trampled. On the edges of the trench, curbs are installed on the cement slurry , the seams between which are filled with mortar. According to the planned drawing, the tile is laid out, between which gaps of 2-3 mm are left. The surface is leveled with a rubber hammer and spilled with water to remove excess sand. If the load is assumed to be more solid, then the tile is laid on the base of crushed stone with a dry sandy-cement mixture. The crushed stone is covered with a layer of 15 cm, is leveled and trampled. Borders are installed on the liquid solution, and sand-cement mixture is poured on top of the rubble, the thickness of which should be at least 5 cm. The laid tiles are also leveled and spilled with water.
How to lay sidewalk tiles with your own hands at a higher load? It is laid on a cement-sand screed on a concrete base. When laying concrete, remember the temperature seams. Borders are installed on the liquid solution, which also seals between the tiles laid.
Variants of how to lay the sidewalk tile with your own hands, a lot: plait, herringbone, circle. You can do this in a chaotic way. In addition, the laying pattern can be determined by one's own imagination. In addition to the variety of shapes, paving slabs are characterized by an abundance of sizes and shades.
How to put the paving slab with your own hands, determined, but you need to know that it requires care. It must be washed, cleaned, but at the same time can not be treated with chemicals and stained. Sidewalk tiles have a number of advantages. First of all - environmental friendliness, as it does not contain harmful components. The surface of the tracks always remains dry, and when repairing the coating, individual tiles are easily replaced. Such a tile can be used many times, and, of course, it looks more aesthetically pleasing than coatings such as asphalt or concrete.