How to fold the tent yourself

Inexperienced in terms of tourist travel, people do not know how to properly put a tent. Quite often they have a question about how to fold the tent with a figure eight. How to fold, and decompose it is very difficult, and it should be done qualitatively. In this case, it is worthwhile to understand that it is necessary to perform the actions so that the whole structure gets into this or that bag. It is this process - the best option for solving the above task. About how to lay down the tent with the figure eight, we will tell in the details as much as possible.

Winter Tent

As a rule, tents, which are provided for the winter period, have both an external and an internal frame. Also in their composition include locks and a lot of stickers. Such designs are quite different from standard species. Consider how to fold the winter tent with a figure eight. In order to carry out the packaging of this "home", you should close absolutely all the locks, as well as Velcro. Then one of the 4 corners must be pressed inward. You should get the form of a book. Next you have to put the tent so that one corner is turned towards you. The ribs, which are located at the bottom, must be pressed firmly to the floor, and the upper ones should be tilted first forward and then downward. Then you can safely pack the tent in a cover.

Debriefing the inner frame

As we stated earlier, the frame, which is hidden under the awning, must be disassembled according to a special method:

• First of all, it is necessary to remove all the pegs along the entire perimeter of this structure.
• Then the awning is removed and the necessary arcs are pulled out. The latter must be added separately.
• Then, on the ground, two layers should be put together so that the seam passes along the seam of the other layer. Then it all needs to be rolled into a tube. You can just lay layers on top of each other and twist them.

In the event that you put everything together according to the instructions, but the tent does not fit in the bag, it means that it was not installed correctly.

The tent, in which the frame is located outside, is assembled in an almost identical way:

• First of all, you need to pull out all the pegs.
• Remove the tent present.
• Remove all arcs and fold them separately.
• Collapse the construction according to the previous principle.

The question of how to fold the eighth tent of a fishing species is also quite common.

First of all, it is necessary to remove all things from it and to fold the structure flat. Select one side and give it a vertical position. This side must be twisted by 180 degrees. In this process, you will get a certain ring, which you will have to bend down to the ground all the time. Above you will have a ring from the very beginning. After completing this procedure, you should fold the rings together. Further safely you can put the tent in your cover.

How to build a children's tent

How to lay down the eight for a tent for adults, we figured out, but from the nursery still have to decide some nuances. Such designs are assembled even faster than adults. Let's figure out how to put a children's tent in eight. This will take you no more than two minutes. But sometimes it is also difficult to fold it compactly. For everything to work out well, you need to follow the instructions:

• We take two opposite edges.
• The edge from the right hand is connected with the opposite edge.
• The plane that we get is to be taken as the lower third part.
• Then we start one hand under the other - we will get the "eight".
• Circles of eight are placed on top of each other to form two rings.
• And these rings perfectly fit in a standard case.

How to build a Chinese tent

How to fold a Chinese tent with a figure eight? Quite an interesting question. These tents are the most common because they are easy to fold, and also easy to use. But here is information on how to properly collect them, is not available to everyone. Therefore, we present you with the correct instruction for collecting a tent of Chinese production. First of all, the difficulties are at the very beginning of the process. People just do not know how to start it right. It is necessary to fold the side strips. This kind of assembly is easiest to carry out together, but if there is no one else near you, you can hold the other side with your foot. In conclusion, it is necessary to twist the oval into a fairly compact circle.

How to build a tent-machine

Undoubtedly, the automatic tent has several advantages over the standard version. The construction of such a tent includes a steel base, which is covered with polyester. It's very easy to assemble it, and most importantly - quickly.

When collecting a tent, follow the instructions:

• Give the design a flat shape.
• One end of the tent should be pulled gently, and then press it against the other edge of the plane.
• Arcs of the tent will take the form of a figure eight, then you twist it up to the shape of a circle and thrust it into the bag.

Thus, we have considered all the nuances of folding the tent with a figure eight, which will be a great help in the implementation of this process.