How to Cover the Roof with Metal Tiles by Your Own Hands: Features of the Process

If you do not know how to cover the roof with metal-tile yourself, the material presented will be very useful for you. First of all, it is worth mentioning the advantages of this finish. So, metal tile is strong, light, durable and resistant to negative influences material. In addition, it is sold in any store and has a low cost.

Now we turn to the question of how to cover the roof with metal tiles with our own hands. First of all, you need to collect the right tool: a drill, a hammer, a hacksaw, metal scissors, a Bulgarian. As for the metal, it can be of different colors, and also have a flat or corrugated surface. To calculate the required amount of material, it is necessary to correctly measure the total area of the roof slopes and divide it into the dimensions of one complete sheet. The roof should be bought with a margin. It will be nailed to the crate with the help of galvanized nails.

If you know how to cover the roof metal with your own hands, you should not forget about the main requirement to use the presented material: the roof slope must have a minimum angle of inclination of 14 degrees. Now you can start preparing the base foundation, that is, the crates. It should be made of flat wooden boards 3 cm thick. Naturally, all wood elements of the crate and truss system must be treated with an antiseptic. Further on the surface is waterproofing.

If you have already read how to cover the roof with metal roofs with your own hands, do not forget to decide which side you will start laying. Naturally, the first row of sheets fits from the bottom of the ramp. In this case, you should mount it so that the edge of the metal tile extends beyond the edge of the crate by 3-4 cm. Do not fasten the first sheet immediately tightly. This you will do after you put a few more elements. Lay them must be overlapped, the size of which is 10 cm. The metal tile is screwed with the help of roofing screws, on which there must be a special sealant, which prevents damage to the surface.

In principle, we already know how to properly cover the roof with metal roofing. The whole procedure will not take long. Work should be carried out in the warm season and in dry weather. Etc And the material sheets can be cut using the Bulgarian. The only restriction that does not allow the use of such a roofing is the complexity of the roof. In addition, the order of fastening of sheets can vary depending on the shape of the rafter structure. For example, if the roof is tented, then the fastening of the metal tile starts at the highest point. In this case, the material should be firmly attached to the ridge.

During work, you should move carefully and carefully on the roof to avoid falling over and damaging the sheets. To cover a roof metal-tile with own hands is rather simple, if to adhere to technology. That's all the features of the process. Good luck!