How to build a fence of PVC by yourself: reviews, photos

Today, owners of holiday villages are concerned not only with reliable protection from uninvited guests, but also with an aesthetic appearance of the fence. There is a lot of materials that can be used for these purposes, and PVC fence is gaining popularity.

What is a PVC material?

PVC, or polyvinyl chloride - a thermoplastic polymer. Used in almost all areas, but in construction - most often. Advantages of the material make it possible to produce products of increased strength, moisture resistance and good fire resistance. In addition, PVC does not need additional processing.

Plastic has proved itself well for many years, in the West it has long been actively used by residents of country houses.

Advantages of PVC fences

Plastic has undeniable advantages.

• Price. The PVC fence is relatively inexpensive compared to its counterparts.
• Ease of installation. It is not necessary to have certain skills in construction. Such a fence can be easily established independently. In addition, the fence is made in the form of sections, which ensures fast docking of the panels.
• Aesthetic look. Plastic fences made of PVC can be used as a decorative element on the site and advantageously emphasize the landscape design. You can make wickets, decorate the flower beds.
• High frost resistance. This allows you to install fences in areas with a cold climate.
• Unconfined effect of acids, salts.
• Fire resistance.
• Durability. Plastic fences serve 10-50 years.

• Shock resistance.
• Resistant to sunlight and sudden temperature changes. Thanks to the presence of special additives in the composition of the plastic, the fence will not change its color with time.
• Plastic.
• A light weight. The fence made of PVC can easily be transported and carried, as it weighs little, unlike wood or iron structures.
• Resistant to rust and rot.
• Ecological compatibility. Plastic does not emit harmful substances, it does not pollute nature, and if desired, its color does not use harmful dyes.
• No need to use chemical agents for treatment against pests.
• Easy to clean. Special care for fences made of PVC is not required, it is enough to wipe the panels with abrasive tools from time to time.

When choosing plastic for the fence, you must be extremely careful, since it is possible to purchase poor-quality material, which will later have to be changed due to unfitness. Therefore, before buying, it is worth analyzing the market, studying the sellers, getting acquainted with their recommendations. But at all times, everyone turned to the help of "word of mouth". Feedback from friends and friends will help you make your choice.

Types of fences made of plastic

The most widely used types of fences are:

• Deaf fence. It is a solid fence for their deaf PVC boards. The main advantage - protection from prying eyes, but there is also a minus - the illumination on the site decreases.

• Wattle. Suitable for rustic and ethnographic styles of sites.

• Fence. Can be used as an oblique or vertical arrangement of panels, with or without gaps.

• Combined. Practice installing and mixed type fences, this can be a transparent top and a blind bottom.

The fence is most often used, because its installation is characterized by reliability and simplicity.

Self-assembly

To install fences, fences from PVC, do not need to have special knowledge, and it will not take much time.

Stages:

1. Drawing up a fence project.
2. Acquisition of materials.
3. Performing the markup of the territory.
4. Installation of vertical pillars.
5. Tension of PVC linen.

Preparing for installation

To draw up a design plan, you need to study the territory where it will be located. If there are obstacles to the installation of the fence, they must be eliminated. Also, you should take care of all the necessary tools in advance.

The design is supported on supports, visors, vertical and horizontal panels, so there is no need to fill the strip foundation.

The market offers a huge number of PVC fences. To choose the necessary design for the style of the site will not be difficult.

Landmarking

To correctly make the markings, it is required to drive the pegs at a distance of 2.5 meters from each other in places to install the bearing poles, between which to stretch the rope.

At the corner of the construction it is necessary to drive in two pegs, beside each of which mark a place for the future pit.

If a PVC fence is installed on the slope with your own hands, then it is necessary to make a marking and pull the rope parallel to the horizon line.

Installation of supports

To the fence does not squint with time, you need to make holes under supports of the same depth, which is measured as 1/4 of the length of the pillar.

The diameter of the well can be calculated by multiplying the diameter of the column by 2.5. The depth should not be less than the freezing level of the soil. This is approximately 0.6-0.8 m.

In the installation of columnar foundation is not necessary, because plastic does not absorb moisture and due to this, it is not prone to rotting and soaking. When installing poles vertically in the holes, it is necessary to secure them with spacers. It is important to ensure that the poles are at the same level.

Installing sections

On the supports you need to install PVC sections. To do this, the poles need to identify the places for fixing the brackets. Further, the lower rail is installed in the lower hole of the support and pushes as far as possible deeper. After that, the next rail is inserted and moves until it is caught by the lock.

The boards are connected to each other in accordance with the design of the fence.

At the very end, the upper rail is installed in the same way as the bottom rail. If the PVC fence is to be made shorter, the length of the rails is reduced by means of sawing.

Next, the sections are mounted depending on the fence model. The plastic is stretched onto the supports and fixed. If an element is damaged, it is replaced with a new one.

After all the work done, the installation of the fence is completed. It remains only to complete several final steps.

With the help of special glue it is necessary to fix on the upper parts of the pillars decorative caps, to wash the section with water from dust.

An important advantage of choosing a fence from plastic is the possibility of changing the color to your taste. It can be painted in any color. The most popular light shades that are suitable for any landscape design. To find out what color PVC fences are, you can study the photo and choose the most attractive one.

Mounting the fence from the plastic on your site, you not only protect it from getting dust from outside, unnecessary looks, but also protect you from uninvited guests, and also make the design more complete and harmonious.

Owners of plots that have installed fences made of PVC, reviews leave only positive about such designs. And this is not surprising, because the undeniable advantages of plastic and ease of installation favorably distinguish it from all the variety of building materials.