If You Have Little Money, A Want to Make an Auto Tuning

If you are tired of the appearance or filling of your battered and ordinary "iron horse", you first need to decide what exactly does not suit you, and what you would like to change. Tuning auto starts with a clear understanding of what you would like to get as a result. At the same time, there is no difficulty in carrying out the so-called styling auto to simply improve the appearance. A more interesting kind of tuning is the modification of the filling of the car in order to improve driving performance. Therefore, we will touch on this topic.

To modify the engine should be approached intelligently and do not wait for wonders of quickness from, for example, an old VAZ. The reserve of power increase ranges from 10 to 20%. And all again rests on the budget of the event. You should carefully study the device that you are replacing. It often happens that the installation of a non-standard unit greatly degrades the quality, even in comparison with the factory part. Excellent sources of information are friends and forums relevant topics. Here are some recommendations that will help you not to lose money:

1. If you are a car owner of a solid age, then try to just adjust the engine. These procedures include adjusting the carburettor, setting the ignition, adjusting the valve clearance, installing a split gear to improve the accuracy of opening and closing valves. These procedures also include disassembly of the engine, followed by cleaning with carbon as well as other dirt. Replace parts that are in poor condition with new ones. After all these procedures can be expected to significantly improve the performance of the engine. Agree that such an elementary engine bulkhead can perfectly replace auto tuning , all the more, carrying out this procedure will significantly improve the quality of your sensations when driving.

2. Perhaps it makes sense to update the control unit software, if you have an "injector". This is the so-called chip tuning. Here it is necessary to address to experts.

3. The resonators and catalysts must be dismantled. This will give some weak power gain.

4. The most inexpensive way of fine-tuning is tire replacement! This is the car tuning. The price, compared to the effect of this procedure, is surprisingly low. For a better effect, sports should be preferred. Also, think about buying a little larger disks, and wide-profile rubber. However, we should not forget that the dimensions of the disks should not be more than a couple of inches higher than the factory one. Clutching with asphalt while driving will be much better, which will increase the driving performance of the car.

5. Modification of the suspension can also have a positive effect. First of all, install springs that are more rigid. It should be noted that if the standard springs are cut off, then there will be little use from this. It is good to add more and shock absorbers of increased rigidity. When buying shock absorbers, the price-quality principle works as well as possible. That is, the more expensive the product, the better its consumer properties. After carrying out these procedures - replace the silicone blocks with polyurethane ones. You can also choose and steel (can be found on the order, it is not cheap).

4. After you have made the above modifications, be sure to work out the brakes. The most budgetary solutions of this kind include the installation of better quality pads. The price of other solutions is much greater.

There are other ways at minimum costs to improve the quality of an ordinary production car. But they are beyond the scope of this article.