Automobiles, Cars
How do I install stickers on my own cars?
At the moment, pasting cars with film is a very popular type of styling. With the help of it you can quickly transform the appearance of the machine beyond recognition. Installation and manufacturing of stickers on cars is not uncommon in Russia. In fact, the film completely replaces painting services with airbrushing. And if the latter requires special equipment, craftsmanship and knowledge, then it can be handled with a glue on its own. In addition, it can be removed at any time if you are tired or disliked. With aerography will be much more difficult. In today's article, we will tell you in detail how to install the stickers on the car yourself.
Preparatory process
To begin with, we need to thoroughly polish the car body, degrease it and remove all unevenness. If necessary, you can apply the filler. Next, wipe the place of pasting with a dry rag and take on the installation of stickers on the car with their own hands.
Getting Started
The material should be applied to the body very carefully and preferably from the edge. Also, many manufacturers recommend that the film be deployed from the smallest radius, so that it is then more easily applied to the bodywork. So it will not shrink, but will smoothly stretch without wrinkles and unevennesses.
After our material was applied to the surface, take a hair dryer and heat the film to a temperature of no more than 60 degrees Celsius. It is important to observe this value, since at 70 degrees the film can discolor and even deform. Glue the material only in one layer for each part of the body. If several parts of the vehicle are involved in the work (for example, the hood and wings), make sure that the film does not lie on top of each other. In this gap (a small gap) dust and moisture can accumulate, which is highly undesirable for such material.
The final stage
After you have installed the film, you should wait about 7-10 days for the material to dry (and not important
Council motorists
When gluing the material, always calculate the length of the film so that it does not stick together with the other. Disconnect the remainder of the sticker is very difficult, so before starting work, it is desirable to treat complex areas with a special solution. Also remember that the film has the property of stretching. When heated, it increases in area by about 20-40 percent.
Similar articles
Trending Now