How do I enable the Internet on Android? How to install the Internet on "Android"?

Within the framework of this article, two main ways of how to include the Internet on "Android" are described. Both the first and the second are based on wireless data transmission technologies. Also within the framework of this material recommendations are given on their practical application.

Ways

To date, the most common are the following two ways of how to include on the "Android" Internet and start data transfer. The first one is based on the technology of wi-fi. Its strength is the high data transfer rate, which for some devices can reach 300 Mbps. But the main disadvantage is a small radius of action. The maximum is a circle with a diameter of 20-30 meters.

The second option for connecting to the Global Web is the use of networks of mobile operators. They can be 2G, 3G or LTE. In this case, the data transfer rate is much lower. For example, for 2G, this is a maximum of 200-300 kbit / s, and for 3G the limit value is 10 Mb / s. But the plus of this method is the ability to establish a connection to the Global Web practically anywhere in the world. Sometimes 2G, 3G or LTE is used to create wireless routers based on a smartphone. In this case, the Internet through the "Android" is obtained from the network of the mobile operator, and is distributed through the Wi-Fi transmitter. This is convenient when you need a laptop on the road, for example, connect to the Internet, and a wireless router or 3G modem is not available. Concerning payment, it can be noted that in the first case it is more often fixed, and the amount of data transferred is not limited. But mobile networks are still charging for megabytes or gigabytes, which is also very inconvenient.

Wi-Fi

The easiest way to connect the Internet to Android is wi-fi (wi-fi). The heart of such a wireless network is the router, to which the wire from the provider is supplied. Also it must be pre-configured. Before connecting, you must necessarily know the network name and the password for the connection (needed in the event that the protection is installed). Next on the gadget under the control of "Android" go to the "Main Menu" by pressing the central button on the sensor. Next, moving around the screens, we find the shortcut "Settings" and open it. In it, you need to find a group of parameters for the "Network". Among them, there must be one called Wi-Fi. Opposite this label indicates the current state of the transmitter. Set it to the "On" position. On some devices, English designations may be used. In this case, it must be set to "On". Then you need to return to the main menu and find the shortcut "Wi-Fi". Open it with a simple tap of your finger on the screen. Then you need to start the search operation. Upon its completion, a list of available points of the wi-file for connection will appear. By the name we find the desired one. If the protection is set, you will be prompted to enter the password to gain access. Then close all the windows and start the browser to work on the Internet.

The previously described procedure of how to connect the Internet to "Android" is done once during the initial registration. Then you can use the accelerated method. At the top of the screen of each gadget under the control of "Android" is a drop-down menu. On one of its top tabs there is a "Wi-Fi" button. With its help, accelerated registration of mobile devices in such wireless networks is carried out.

Settings for mobile networks

If in the case of wi-fi the setting is very simple, and for its implementation you only need to know the network name and password to connect to it, then with 2G, 3G or LTE everything is much more complicated. In each mobile device for the organization of such a connection, you need to create a special profile, which in a certain way must be configured. In most cases, this happens automatically, that is, when you first turn on your smartphone or tablet in a mobile network, the search for the necessary profiles is started to organize the transfer of data. Once the necessary information is found, it is immediately sent to the subscriber. In the future, he must accept these profiles, save and set them by default. But this order is not always fulfilled. In some cases, for example, when you have a completely new gadget or an uncertified device, you have to act non-standard. You can call the operator and order the default settings or enter them manually.

Connecting to the Internet through mobile operators

In the future, the Internet connection to "Android" is reduced to the activation of this data transfer service. To do this, in the upper drop-down menu next to the button "Wi-Fi" we find another one - "Data transfer" - and press it. This will activate the service. When it is finished, a corresponding message appears on the device screen. Next, close all previously open windows and start the browser. If the settings in the previous step are set correctly, the Internet resources will open without problems. We do not forget that in this case the sites will be downloaded more slowly to the phone ("Android"). The Internet, of course, works at a lower speed than with wi-fi.

Which option is better?

Now we'll figure out how to turn on the Internet on "Android" best for each specific case. If you do not travel often and you need a high speed connection, then it will be more appropriate to use wi-fi. And from a financial point of view, you can also save money, since the price in this case is usually fixed. But if you travel a lot, and speed does not play a big role for you, it is better to choose wireless networks of mobile operators. In this situation, they are still uncontested.

Summary

Within the framework of this article, two main ways of how to include the Internet on "Android" have been described. Their main advantages and disadvantages were pointed out, comparing which, we gave recommendations on their use. On their basis, each user can choose the option that best suits him.