Guide for the box: its types and characteristics of models

The rails, which are used in modern furniture, are improved and acquire new shapes and sizes. The guide for the drawer is the main element, providing its comfortable operation. If more recently, sliding -type elements have been used for drawers , ball and roller models are now common.

Roller tracks for boxes

These are the simplest panels that are of good quality with sufficient metal thickness. A great influence is provided by the correct choice of screws. Installation of such panels provides easy operation of the locker and easy dismantling. The replacement of the guide is also quite simple.

Roller panels are short-lived with frequent use, they do not allow full opening of the cabinet and clap when the latter is closed.

Ball guides

Have a complicated design, which makes it possible to fully extend the cabinet, ensure smoothness when moving and reduce the noise that appears during the operation of the guides.

The ball guide for the box has a higher cost, but all its advantages pay off in the period of using the cabinet. The panel design is a nested one in one three parts, which ensure the full extension of the drawer.

The quality of the guide is determined by the thickness of the metal from which it is made. The bigger it is, the stronger the panel and the greater the load it can withstand. Boxes on ball rails have a less aesthetic appearance, rather than roller, and are operated with less smoothness.

Panels with closers

Are improved ballpoint panels. Their feature is the presence of a door closer, which ensures a smooth and noiseless closing of the box. The principle of the door closer is to pick up the moving element and slow its closing. Thus, even with excessive force, there will be no loud sounds.

The guide for the drawer with the door closer is capable of withstanding heavy loads. It has a high cost, so when choosing such panels it is important to pay attention to the smooth operation of the box. If it is insufficient, it will be irrational to acquire a guide with a door closer.

Such accessories also have a not very attractive appearance and spoil the aesthetics of the drawer.

Guides that ensure the drawer pulling out after pressing

They have the same characteristics as the panels described above, but they have one feature. This opening of the drawer by pressing the façade part. This kind of variation does not allow the use of handles. Guide rails for drawers with closers ensure maximum smoothness of closing.

When installing it is important to remember that between the front and the cabinet you need to leave a gap of several millimeters, thanks to which it will be possible to press and overcome the damper action.

It is worth carefully arranging such mechanisms in the house with young children, since there is the possibility of injuries by accidentally pressing the box.

Hidden Guides

Hidden action panels are currently the most popular. They are used for all types of furniture, especially expensive manufacturers. Installation of the guides is carried out under the bottom of the box. They have increased reliability and withstand high loads, ensure trouble-free dismantling of the box for cleaning it. However, it is important to note that this type of mounting reduces the height of the drawer.

There are also hidden guiding elements that open when pressed. The guide for the box provides a high aesthetics and allows for maximum use of width.

Metaboxes

They are improved followers of roller guides. They have a complex construction, which is a support panel and a side element of the box. Such a device makes it possible not to use additional chipboard sheets to create side walls of the box.

It is also possible to fasten the front part of the box to these elements. Such box guides are used mainly in kitchen furniture and office cabinets. They are made on the basis of metal, which is subsequently painted in a suitable shade. Due to this, a similar mechanism has a wide range of models.

Metaboxes have many advantages, their use increases the size of the box, while reducing its weight. They are more convenient to install, however, despite all the advantages, the cost of furniture with such a mechanism is an order of magnitude higher, which does not always please the buyer.

The choice of the guide depends more on the required functions of the box. Most often used in the production of furniture economy class standard roller guides. They are most simple in both installation and operation.