Fuse Block VAZ 2110 - device and functions

Probably, every owner of the domestic VAZ products faced the problem of non-working turn signals. As a rule, the owners of the old "Zhiguli" suffer. However, despite the great progress and development in the technology world, this misfortune has not stopped pursuing the Volga model range until now. VAZ 2110 is no exception. And if you have stopped working turn signals, do not rush to change the light bulb - perhaps it's all in the fuse block. The latter insure the operation of all electrical appliances in the vehicle circuit. Therefore, in case of a short circuit , first of all, the fuse block VAZ 2110 takes a blow on itself. And today's article will be devoted to this device.

Fuse circuit VAZ 2110

Each mounting block has a layout of all the parts inside. On it, an arrow or a black bar indicates which fuse performs a particular function and where it is located. The diagram is in each manual of the car. The VAZ 2110 fuse block protects against the short circuit the following elements:

1. Lamp of lamps of illumination of license plate and devices.
2. Control lamp of parking lights.
3. Left, right headlamp (low / high beam). Here for each element there is a fuse (in the sum of 4).
4. A portable lamp.
5. Lamps front and rear fog lights.
6. Electric windows and fan of the engine cooling system.
7. A portable lamp.
8. Turn on the heating of the windows.
9. Circuit protection fuse.
10. The relay of direction indicators and "emergency".
11. Stop lamps.
12. Locking of door locks and generator winding.
13. On-board computer and panel board lighting.
14. Heater control.
15. A lamp of illumination of a ware box.

This was only a small part of what protects the VAZ 2110 fuse block in the event of a short circuit in the electronic circuit. Therefore, each malfunction of headlights, side lights and other elements can be caused by the failure of this part.

Where is the VAZ 2110 fuse block located?

On all cars of the "tenth family" this element is to the left of the steering column, at the bottom (see photo # 3). Visually it can not be seen, since the entire area of the device is covered with a plastic cover. Underneath is a mounting block that motorists often call a "black box" because of its characteristic construction and color.

What is the rated current that is able to pass a fuse block in the car VAZ 2110?

Approximately 30 Amp. However, this value can be different. Typically, fuses comply with the IEC standard (EN 60127 and IEC 60127) and GOST P. Such parts are capable of withstanding a sufficiently high current (up to 30 Amps), which occurs in the electronic circuit upon closing. Fuses that comply with this standard can keep this voltage for a long time without melting. However, if it is a current of more than 30 A, the unit can not stand, and all the parts in it will burn. Such stress they can not stand, because the temperature inside the mechanism can reach several hundred degrees Celsius.