Finishing the base: options and photos

When building private houses, any detail is important. Therefore, even the finishing of the foundation requires increased attention from the master. After all, what kind of finishing material will be chosen for this depends on the comfort of the premises. That's why homeowners often wonder what ways of finishing this part of the house exist. In order to make the right decision, you should consider several options at once, having familiarized yourself with the technology of the work.

Using Panels

Finishing the foundation of the house with panels allows you to make the lower part of the house more resistant to external loads. The original appearance will persist for several decades. Modern finishing materials by type of panels are inert to chemicals and reagents. They are fireproof and frost-resistant.

Use of siding

Finishing of the foundation by siding is carried out today quite often. This material is universal, which is why it can be installed on almost any surface. Ground siding has many advantages, among them:

• Resistance to ultraviolet rays;
• Protection from moisture;
• Resistance to damage and shock;
• Ability to undergo significant loads;
• Simplicity of installation;
• Long service life, which reaches 50 years.

When the foundation is finished with siding, the socle variety of this material should be selected, which is much more reliable, stronger and more stable than usual. The best option is considered to be siding for brick or stone. Vinyl material does not require staining and seaming of joints. Even after a few decades, the siding will not crack and will interfere with the contact of the cap with salt and groundwater.

Facing with stone

Natural stone is a modern and fashionable solution. However, before choosing this material, you should consider that it has some drawbacks, namely:

• Impressive weight;
• The need to build a supporting frame for the installation of stone slabs;
• High cost.

If the funds do not allow, you can purchase an artificial analog, imitating natural material. It is simply installed and has a light weight.

Use of plaster

Finishing the foundation is often done today with the help of a cheap method - plaster. This natural material allows the use of mineral wool, which acts as an additional barrier to frost. Prepare for the work will also need a grid, which will hold the solution and ensure the construction of durability and stability.

After the completion of the finishing work, a paint is applied which will make the appearance of the socle more attractive and provide protection from moisture. In addition to staining, you can use other types of decor. Sometimes masters perform imitation of a stone with the help of a file. As soon as the paint dries, you can make contrast stitching.

Technology of foundation finishing with siding

Finishing of the foundation can be carried out by siding. In this case, the technology requires the installation of a metal crate. In addition, thermal insulation can be used, in this case the rack will have a square cross-section and a side of 50 mm. The distance between the slats should be 25 cm.

Once the frame is ready, you can proceed to install the initial bars. When installing panels, do not forget about the need for a small gap, which is 5 mm. When installing the starting plate, the screws are placed every 30 cm. They need to be screwed into existing holes only, without making additional ones. This is due to the fact that there may be defects and distortions.

Sometimes a J-element is used as the starting plate, which allows to form the edging. When the foundation of the house is finished with panels, you should also set the corners. External allow you to eliminate the need for docking the slats. Fastening of corners is carried out by screws. It is not necessary to heat the fasteners, a gap is left between the cap and the surface, which will allow for expansion of the products.

J-profiles are installed in the places where you want to create a path. This applies to the protrusions of the house, openings and communications. Particularly demanding are the internal corners, which can turn out to be uneven. This bar is also suitable as a finishing edge.

Installing the panels

When the foundation is finished, the photo should be considered in advance. They will allow you to understand how the building will look like in the end. If you have already installed all the auxiliary elements, you can proceed with the installation of the panels. To move from left to right, jump from the wall to the wall is not necessary. After completing one side, you can begin finishing the second one.

The first bar is flush with the outer corner and the initial bar. This should be 3 mm. Further everything is quite simple. The following bracket is attached to the attachment of the previous product. Then you can proceed to the second row. Sometimes technology is used, in which each next row is set with a certain shift. In this case, after installing the last row, you can finish the lining with the final bar.

Preparation of tools before installing the stone on the foundation

Finishing the foundation of the house with a stone will make the appearance of the building more presentable. Before starting work, the following tools should be prepared:

• Saw;
• Metal brush;
• Putty;
• glue;
• Ruler;
• file;
• pistol;
• drill;
• Shovel for grouting joints;
• Sandpaper;
• Roller;
• A primer;
• Spatulas;
• level.

Surface preparation

As a base material, concrete or brick often appears, which have the composition and properties similar to that of artificial stone. Therefore, the adhesion conditions are quite high. The surface should be cleaned with a metal brush or spatula, and then repair chips and cracks with a putty. All surfaces are cleaned. The master should make sure that the foundation is dry. It needs to be covered with a primer and wait until it dries. Only after you can proceed to laying the stone.

Technique for the installation of stone

The stone foundation is finished in warm weather. It is important to distinguish the top and bottom of the facings. Next, markup is done, you can use a cord for this. The next step is the preparation of the solution and its application to the wall, as well as to individual fragments of the lining. It is important to limit the area to 1 m ² . This will avoid premature drying of the formulation.

Begin work from the bottom of the corner. This will eliminate the sliding of the stone. When the foundation is finished under the stone, the elements must be pressed into the wall. If you plan to make joints, the clearances between boulders should be between 1.5 and 3.5 cm. It is necessary to choose the appropriate size, taking into account the parameters of the fragments.

If you need to saw the material, you should clean the edges with a sandpaper or file. All gaps after laying the stone are filled with grout. The composition should not get on the surface. In this state, the material is prepared for a day, only afterwards it is possible to perform grouting. Sometimes builders use hydrophobizing compounds. Before acquiring them, you need to familiarize yourself with the properties. The mixture should not form a film on the surface and prevent absorption of moisture.

Conclusion

If you want to finish the foundation for a brick, then you can also use clinker tiles. The cost of such material will be much lower than many analogs. If you want to additionally insulate the base, you should buy a heat-insulating tile that is able to store heat and protect the foundation.

This material is mounted by the method of superimposing elements on each other. Stacking can be carried out quite quickly, but it should be taken into account that the products have quite impressive weight. Therefore, they should not be installed on a simple solution. It is recommended to use a special mixture. For such a design, it is necessary to prepare the surface, which must be leveled and made as strong as possible.