Epson SX130 - the perfect home MFP

Epson SX130 – это небольшие домашние системы печати и сканирования. The main niche of using the Epson SX130 multifunctional device is a small home printing and scanning system. In this case, very high demands are placed on the quality of the print itself, and the speed and possible ways of connecting are receding into the background. Also important is the cost of the peripheral device itself.

Niche MFU. List of supplies

принтер Epson SX130 наиболее оптимально подходит для применения в домашних условиях. As it was already noted, the Epson SX130 printer is the most suitable for home use. This positioning is indicated by a monthly printing limit of 5,000 copies, and a small cost, and high print quality, and mediocre performance. In the delivery list, in this case the manufacturer included the following:

• MFP.

• The initial set of cartridges.

• Software recorded on a CD.

• Configuration Guide.

• Power cord.

• Warranty card.

But there are no wires to connect to the computer in this list. This approach is logical from the manufacturer's point of view, a logical explanation, which is that most home users already have such an accessory. If it is not, then you will have to purchase this accessory separately and at an additional cost.

Speed and paper

Virtually all possible formats can print Epson SX130. In addition to the usual and most common A4, A5, A6, this list also has a whole series of photos, which starts from 13 x 18 and ends at 20 x 25. The density of the pages should be in the range from 64 to 300 g / m ² . As a result, this inkjet multifunction device can print and copy on virtually any media. The only thing missing in this list is CDs. But to date, this option is not so much in demand, the manufacturers of peripheral equipment from it gradually refuse. The following performance characteristics are declared by the manufacturer in this case:

• 93 seconds to output one color photo of high quality with dimensions of 10 x 15.

• 28 pages of A4 in monochromatic format per minute.

• 15 colored sheets of A4 per minute.

The resolution of the printer is set by the manufacturer at 5760 x 1440. In the multiplier mode, this value is reduced to 600 x 1200. The scanner can boast the identical resolution.

Ways to connect

Expect a rich communication kit from the IFI initial, budgetary level certainly does not have to, and this is entirely true of the Epson SX130. Alas, in this case there are no additional ways of TCP / IP or Wi-Fi. Therefore, the only possible connection is USB. As the company-manufacturer notes, it is most optimal in this case to use its revision 2.0. In this case, the speed of the data transfer interface will correspond to the speed of the print and scan subsystem. You can use earlier versions of this wired universal 1.X interface, but this will result in an insignificant decrease in performance. Also for these purposes, it is possible to use USB revision 3.X, but in this situation, already the capabilities of the wired interface will not be fully downloaded.

Cartridges

This model allows the use of such models of cartridges:

• Black T1281 with a limit of 300 pages.

• Blue T1282 with a limit of 200 sheets.

• Purple T1283 with a limit of 200 pages.

• Yellow T1284 with an identical print resource.

Setup order

The order of tuning of the solution under consideration is as follows:

• We install the MFP at its permanent location.

• We connect it.

• We begin the process of installing the application software from the complete CD-ROM.

• When the dialog box appears, turn on the device.

• , картриджи устанавливаем. After the initialization is completed, lift the Epson SX130 cover, install the cartridges .

• After this, the MFP should print a test page.

Specifications for power consumption and noise

A high degree of energy efficiency can boast MFP model Epson Stylus SX130. Reviews indicate that in the operating mode, it consumes only 12 watts. In standby mode, this value is reduced to 1.7 W. Against the background of laser MFUs with 300-500 W these numbers look really impressive. The noise level of this multifunctional device according to the specifications does not exceed 38 dB. The dimensions of the MFP are 436 x 304 x 150, and its weight is 3.9 kg. The operating temperature range is limited to 10-35 ^o C.

Cost of the MFP. Owners opinion

Epson Stylus SX130. At 3000 rubles to date, the Epson Stylus SX130 is rated. указывают на то, что это действительно минимальная стоимость данного устройства. Reviews indicate that this is really the minimum cost of this device. In essence, this peripheral solution does not have significant drawbacks. The only one is the lack of an integrated system of NPCs. Alas, the device is ultrabudgetary, and the manufacturer for the purpose of saving excluded this component from such a printing subsystem. Therefore, the new owner of this universal solution is recommended to immediately purchase external CISS and set up. This will reduce the cost of workflow to a minimum. The pluses in this case include:

• The minimum cost.

• Photographic print quality.

• Ability to reduce printing costs to a minimum.

• Simple and straightforward tuning algorithm.

Results

Epson SX130 – это дом. Only the use of Epson SX130 is aimed at a single application in one possible sphere of application - it is a house. In all other cases, the use of such a decision is impractical. And both for technical and for economic reasons.