Embroidery with ribbons "Tyutelka in Tyutelku": we begin with the basics

Embroidery tapes "Tyutelka in Tyutelku" - a series of video master classes Tatyana Ulanova, in which she step by step teaches one of the most beautiful types of needlework. We suggest you also take an initial lesson, so to speak, start with the basics. As you know, everything new is a well-forgotten old. This includes embroidery with satin ribbons.

Today this kind of needlework again becomes popular. The work done in this technique is a voluminous, amazing beauty! You just need to acquire a certain skill, and real masterpieces will come out from under your hands. In addition, you can develop a taste and sense of color.

Materials and tools for the lesson "Embroidery with ribbons" Tyutelka in Tyutelku ""

To sew with tape, you need sharp needles that should pass through the fabric freely, without forming puffs. The eye of the needle should be necessarily elongated, because through it the tape should pass easily, slide and do not twist. If you are working with a 3 mm wide tape, you will need needles No. 24. And for the width of 7-12 mm, the numbers 18-22 are suitable. Well, if you find a gilded needle, which is covered with galvanic compound - it protects it from oxidation and rust.

The most popular among domestic embroiderers are satin ribbons. They can be smooth, pleated or assembled. The colors and width are different for them. The narrowest ribbon is 0.3 mm, and the widest - up to 6 cm. For solemn and special occasions, lace ribbons with beads or prisborennye are used in finishing clothes.

The basis for embroidery uses a variety of fabrics. It's cambric, camisia, and matting, and satin - they belong to cotton fabrics. From linen fabrics a rough canvas, a stern cloth, a cloth with a homogeneous base or a thin cloth is used. Applied for embroidery are different materials such as tweed, crepe, jersey, silk fabrics. In principle, you can embroider on any surface, if only to hold the stitches.

Several stitches from the lesson "Embroidery with ribbons" Tyutelka in Tyutelku ""

At a traditional embroidery at the beginning of work on a string the knot is not fastened. But when sewing ribbons is a flat knot to fasten. Take 50 cm tape, insert it into the needle, bend the tip, insert the needle into its center, then, with one hand supporting the tape and pulling the other hand, tie a knot. Now consider a couple of stitches.

"Loops in a circle." Stretch the needle from the wrong side of the face and stick around the point from which it came out, pull it to the wrong side. There was a loop, which you need to fasten with a pin. And then continue to manipulate, moving in a circle. 5 steps - 5 petals, and the center of the flower you can fill with beads or beads.

"Half-stitches with attached". Draw a needle with a ribbon on his face. Make an eyelet and hold it with your thumb. We make a puncture next to the previous place on the right side and stretch it to the wrong side. Now back pierce the fabric in the center of the loop and pull out the needle. Through the loop we stretch the ribbon and immediately remove the needle from the wrong side up, thereby starting a new stitch.

There are also other types of seams, which are used for embroidery with ribbons. Roses, tulips, lilies of the valley, daffodils, butterflies, trees and much more can be created with the help of unique techniques. This is real art, as the flat picture becomes voluminous and alive. And to learn all this, use the master classes Ulanova, united by one name - "Embroidery ribbons" Tyutelka in tyutelku. "