Electric saw "Interskol": reviews, specs, operation and repair

If you have a country house, a dacha, you decided to make a large-sized thing made of wood or carry out repair work, you should think about purchasing a high-quality electric saw. However, this tool has some drawbacks, for example, in the case of chain models, the working part will have to be lubricated and sharpened from time to time. If this is not done, the circuit can increase the load on the motor. In general, this technique is quite expensive, and not every consumer can buy it. But you can also prefer an amateur model that will cost less.

Disadvantages of power supply

In the conditions of a country house or a summer residence, where the voltage drops in the network are quite frequent, thermal protection will also be necessary. If you do not take care of its availability when using the tool, the risk of igniting the "heart" of the equipment can increase several times. However, even if the thermal protection is used, the performance under reduced voltage conditions will be less. However, these shortcomings, perhaps, are one of the main ones. In general, the electric saw is the equipment that allows you to cope with many tasks. The main thing is to choose a manufacturer, so that the equipment lasts longer. An excellent example for consideration can be the electric saw "Interskol", reviews about which you can read below, as well as information about the features of repair and specifications.

Characteristics of a chain saw of the brand PC-16/2000 T

This model costs in 6800 rubles. It is a chain electric saw - a universal tool used for working with wood. Excellent balancing, which is supplemented by a reduced level of vibration, as well as an ergonomic handle, provides the operator with a comfortable work with the saw. The saw blades are smeared automatically, this functionality is ensured by a plunger pump.

The saw is environmentally friendly, in the process of work it does not emit harmful gases into the atmosphere, which makes it possible to work with it even in rooms. Such power saws "Interskol" chain, reviews about which you can read below, have quite impressive power. In the case of the described model, this parameter is 2000 W. The engine in the structure is located along. The length of the tire is 40 cm. Weigh the equipment 5.7 kg. For a second, the chain rotation speed is 14 m. The chain pitch is 3/8 inches.

The electric saw "Interskol PC 16 / 2000t" has compact dimensions, which make 550х190х265 mm. The length of the tire is 16 inches. The width of the groove is 1.3 mm. It is important to take into account before purchasing that there is no keyless adjustment of the chain tension in the structure. The equipment operates from a 220V network. The device has 57 links.

Reviews about the model

Consumers who have already enjoyed the quality of the saw described above note that it has many positive features, among which:

• Reliable control;
• Effective sawing;
• Work safety.

As for the control, it is provided by the main handle, with which you can grasp the saw as hard as possible. Effective sawing also attracts consumers, it is guaranteed by a chain and a saw-bar, which can be used by wood of different breeds. The electric saw "Interskol PC 16 / 2000t" is also distinguished by its safety.

In the design there is an inertial brake, which, with a strong kickback, will be able to instantly stop the circuit. This functional also works when touching the protective shield by hand. Additional advantages are the consumers consider high engine power, the presence of additional brake motor coils, which will disconnect the circuit when the power is cut off. The design has a rather long saw bar, as well as an effective system of protection against unintentional starting.

Technical characteristics of a circular saw of the brand DP-210/1900 M

This model is a fairly powerful design, which is designed for professional use. The device with sawing to a depth of 75 mm will cope, while it is possible to work with:

• Board;
• Laminate;
• Plywood.

The manufacturer took care that the equipment had a rather impressive capacity. The unit operates at the expense of the motor at 1900 W. This allows you to use the 210-mm drive. The overload protection is provided by the softstarter function. Operation of the saw is simplified by the listed characteristics, and a reliable protection system extends the service life.

The described electric saw "Interskol", about which you can read below, has a landing diameter of a disc of 30 mm. There is no speed control in the construction. The device weighs 6,2 kg. The maximum depth of cut at an angle of 45 ° is 53 mm. Before buying it is important to consider the dimensions of the device, in this model they are equal to 270 x 354 x 254 mm. The number of revolutions per minute is 5000. An additional advantage can be considered a soft start option. The operator will have the opportunity to work with the guide rail.

Reviews about the model

The above-described electric saw "Interskol", reviews about which should help you make the right choice, according to customers, has many positive features, namely:

• Ease of operation;
• Cleanliness in the workplace;
• Adjustable tilt angle.

The operator can maintain the workplace clean thanks to a special nozzle with which the vacuum cleaner can be connected to remove sawdust. Ease of operation is guaranteed by reliable fixation of the tool, because the operator will be able to hold the equipment with two convenient handles.

Additional features

You can adjust the angle from 0 to 45 °. Additional advantages of the buyers are the reliability of the design, the presence of a soft start system and constant electronics. It is impossible not to distinguish compactness, the availability of protection from accidental inclusion and the presence of a carbide saw blade in the kit. The depth of the cut you can adjust quite simply, this especially pleases the home craftsmen. The equipment is universal, for this reason it is quite often chosen by consumers.

Instruction manual for the model

If you are interested in the electric saw "Interskol", it is recommended to read reviews about it before buying equipment. Of these, you can find out that the use of the saw should only be done after learning the operating instructions. In it, the manufacturer stresses that the power tool is a source of increased danger. Before starting the equipment it is important to ensure the safety of the workplace. It should be kept clean, ensuring good lighting. If the workplace is cluttered or poorly lit, this can cause an accident. Unauthorized persons and children should not be allowed to enter the electric machine while working.

When you get acquainted with the instructions, you can be considered the scheme of electric saws "Interskol". From it you can understand that the plugs must fit the sockets of the equipment, this must be checked before the device is operational. The plug should not be replaced by yourself. When working, it is necessary to use personal protective equipment, this refers to work clothes, glasses and a respirator.

Safety regulations

All spanners and adjusting wrenches must be removed before turning on the tool. Do not try to reach for anything when you are working with a saw. It is not recommended to use the unit if it is defective. The non-working machine must be kept out of the reach of children. Cutting tools must be stored in a clean and sharpened state.

Chain saw repair

Electric saws "Interskol" chain, reviews about which you could read above, sometimes fail. This can happen for several reasons. If the equipment does not turn on, it is necessary to check the power, continuity and connection of the wires. If the network is OK, then you need to look at the chain brake, because it can block the work. To solve the problem, move the brake guard. If the listed measures did not help to turn on the tool, you need to make sure that the plug and cable are working.

When the saw's power is reduced, it is necessary to replace carbon brushes, which wear out from time to time. Sometimes it also happens that the chain for the electric saw "Interskol" stops only after a while, and not when it's necessary. With an increase in the life of the unit, this time interval may increase. In order to correct the problem, it is necessary to replace the brake band of the saw blade, because it has the property of wearing out. Sometimes when working with a tool there is an unpleasant sound, it can arise because of a lack of oil or contamination of conductive grooves. You can fix the problem by filling the oil and cleaning the furrows.

When repairing, it is necessary to use only original spare parts for electric saws "Interskol", the cost of some of them will be discussed below. If you notice that the case has been damaged, then for safety it is necessary to hand over the construction for repair. Cutting parts of the tool can not be replaced unless recommended by the manufacturer. Sometimes craftsmen try to replace parts that do not fit the design.

Recommendations for extending the life of the saw unit

Before starting work, you should make sure that there are no hard metal objects in the workpiece. If the cutting element is in contact with them, then the chain will be chipped and jagged, it will be difficult to get rid of them. Repair of electric saws "Interskol" should not be carried out on the ground, in fact in this case the ground can get into oil grooves, the chain as a result will remain without a mask and worn out.

It is important to follow the wedge of the tool, it should not be allowed, because in this case the metal overheats, which leads to a decrease in the service life. If you purchased the electric saw "Interskol", the price of which was mentioned above, then you should know how to determine when the grinding should be done. To do this, pay attention to chips, if they are darker and shallower, then this indicates that the chain is blunted. This fact is due to the fact that blunt edges do not remove the cutting layer, which leads to the grinding of the material. The quality of the grinding will be determined by a visual inspection. The saw chain must not have radii, torn areas and damage. The cutting edge and the shape of the tooth should be the same as they were on the new instrument.

The cost of some spare parts

When using the tool, you may need a new anchor. The electric saw "Interskol", no matter how good it is, sometimes needs replacement of spare parts. The mentioned node, for example, will cost the consumer 1,600 rubles. But the set for sharpening can be purchased for 830 rubles. A saw blade on a tree with a landing diameter of 30 mm will cost the consumer 500 rubles. As for the saw blade "Quick Cut", then you will have to pay 690 rubles for it.