Do you know how to make an electric shocker?

So, you have wondered about how to make an electric shocker. Before proceeding to the technical side of the matter, one should talk a little about the possible consequences of using this "device". According to the Federal Law "On Arms", it can be used as self-defense. At the same time, no permits are required for the citizen. On this good news ends. The saddest thing is that claims to the person who used a powerful electric shocker will not be only if the latter is a certified product.

Therefore, before using a handicraft device, you should think twice, and perhaps three times. But the time for such meditations in a dark gateway, a stranger breathing heavily into the back of your head will not let you. Especially if you are an attractive girl. So let's still see how to make an electric shocker at home. We will talk about an extremely simple and safe apparatus, which, nevertheless, will help frighten off a potential villain.

So, to implement the plan we will need: a pair of rivets made of aluminum, a cardboard box (approximately like a cigarette pack), 30 centimeters of copper wire, a capacitor (20 MkF), a pressure switch, epoxy adhesive. In addition, you will need a tool: a knife, a soldering iron, pliers, nazhdachka and so on.

If you still want to know how to make an electric shocker to give self-confidence (especially in the evening), then please note: the instructions below will be given below to create a single-shot device. By the way, it will be possible to charge it from an ordinary electrical network (220 volts).

Honed aluminum rivets will act as contactors. They need to be positioned in such a way that they can easily and simply enter the socket: through them our small "rescuer" will be charged. As for its form, there are no restrictions. You can give the device a view that you find most acceptable. You can, for example, put the capacitor in a box, then connect the circuit and fill the whole thing with glue. After waiting for the moment when it withered, tear off the cardboard and process it with sandpaper. When shaping, it is better to be guided by considerations of practicality. Yes! One more little detail. Find somewhere a cover for the electrodes. To the device suddenly not discharged in your foot. Or in a smartphone. In principle, that's all. Now you know how to make an electric shocker.

Now a few words about charging and use.

The first is carried out elementary: we insert electrodes into the socket, we hold the button of the switch, we wait, while the capacitor will be charged. The waiting time is usually a few seconds.

It should be noted that knowing how to make a shocker is only half the battle. Yes, yes, do not be surprised. In addition to this knowledge, certain skills will be required to use it. In particular, you should touch the bare skin of your opponent's face while pressing the button of the switch. By the way, you can start holding it in advance. Discharging the capacitor will cause shock to the attacker. Not fatal, but quite unambiguous. Finally, the most important thing: the discharge can not break through the clothes. Even the easiest. That is why it was mentioned above that contactors should be sharpened.