HobbyNeedlework

Children's pillows with their own hands: patterns, patterns, sewing

If you learn how to sew baby pillows with your own hands, original and original, this will allow you not just to decorate your interior, but also to avoid wasting money and time to buy them. And with the help of various buttons, laces, bows and other inexpensive means, you can give them exclusivity. In addition, you can please your loved ones by giving them one of their masterpieces.

If you have not been fond of needlework before, you can start sewing pillows using simple patterns. In any case, you will be pleased with the result, and you will see what a fascinating process. Gradually gaining mastery, you can surprise anyone with your works.

Where to begin?

To start sewing cushions, you need to prepare everything you need in advance. This will not be distracted in the process of work. The most important thing is to have a pattern of pillows before you. On the basis of their already worth choosing a fabric, filler and accessories.

Option 1

Fabric is better to choose wear-resistant. And the color and texture depend only on your taste or interior. The main thing is that the pillowcases on the pillows can be removed and washed.

The filler is better to choose one that lasts longer the elasticity and softness. Felt fluff or feather is best. Such pillows can serve for decades. If you have old feather pillows that you do not use, then you can use a pen from them. But you need to be extremely careful, then not to collect all over the house down.

Option 2

If you do not like such an option, we recommend buying synthpuh or holofayber. Synthepuh is a polyester fiber, rolled into small fluffy balls. And holofayber, in turn, is the same polyester, but already in the form of a thick leaf. These fillers are quite elastic and 5-7 years old will be exactly.

Option 3

Another type of filler is silicone granules. They are convenient because they are easy to fall asleep in ready-made pillows, through a small hole. In addition, if necessary, they can be easily removed and washed from there, and pillowcases can be washed separately. The main thing is not to wash these granules in the washing machine! Only by hand!

A simple version of a baby pillow

For beginners, let's talk about how to make baby pillows by yourself.

We take:

  • The fabric is dense monophonic (length 64 cm, width 122 cm);
  • filler;
  • Fabric colored, with typewriters or flowers (length 65 cm, width 145 cm);
  • Thread;
  • scissors;
  • Centimeter tape;
  • Pins;
  • Chalk.

Let's start with the "napernik"

Let's start from the very beginning:

  1. To do this, we take a monophonic fabric and fold it in half. The length and width of the napernik in the final version should be 60 by 60 cm. Everything else goes like an allowance for the seam. It turns out that the width of a piece of fabric will be 62 cm, and the length is 64 cm.
  2. Sew the sides of the fabric. On one side, leave a hole for the filler. We turn the napernik on the front side. Good ironing. Fill the pillow with filler. The amount of filler depends on how much the pillow density you want. For young children, it is not recommended to make high models.
  3. Now carefully sew the hole.
  4. We proceed to the pillowcase.
  5. We will sew it with a valve, for ease of removal. For the beginning we sew edges. Ottjuzhivaem. Then fold the fabric cut out from the inside out, so that a square 60 cm by 60 cm is obtained, and another 22 cm piece on the valve should lie on top of one of the sides.
  6. Sew the sides of the pillowcases taking into account that 1.5 cm is the allowance for the seams, and 2 cm for the pillow to fit easily into the pillowcase.
  7. We turn out the pillowcase on the front side, insert the pillow, fill the valve. All! We got a pillow 60-60 for children.

Important! Before we start sewing baby cushions with our own hands, we recommend you to wash the cloth. Since the material for making pillows is used natural, it can shrink.

Pillow with a heart

Here is another scheme of a pillow made by oneself. We take:

  • Fabric velor;
  • felt;
  • scissors;
  • Ruler;
  • Synthepuh;
  • Hot melt;
  • Acrylic paint;
  • Thread and needle.

Instruction:

  1. We take a soft velor pink cloth. We cut out a cut of 1 m by 50 cm. We fold the cut in half and sew the sides together from the wrong side. We leave one side free.
  2. Let's start decorating. To do this, we cut out the muzzle of a rabbit, a heart, or any other figure from felt. We have this heart. At the edge of the heart with acrylic paint draw strokes, they imitate the seam.
  3. When our heart is dried, we glue it with a hot glue to the pillowcase. If you do not have hot glue, you can use the glue "Moment Classic" or threads.
  4. Fill the pillow with filler. Stitch the remaining edge carefully.

Now let's talk about how to make original children's pillows with your own hands.

Pillow flower from patchwork

Virtually any of us will have at home pieces of various fabrics. It can be and old clothes, curtains, etc. All these things can be used worthy of use. For example, sew baby pillows with your own hands. You just can not find them in the store.

Today we will tell you how to sew a flower pillow from shreds.

For it we will need:

  • 5 different pieces of cloth;
  • Yellow fabric;
  • Sintepon;
  • Buttons.

In order to make the petals:

  1. From the scraps we cut out 6 squares. Fold them in the triangles with the wrong side up. We sew one side. Then turn it to the front, fill it with sintepon and sew it. All the resulting petals are stitched together - so that the inflorescence is obtained.
  2. We make the middle. We take a yellow fabric and we cut out of it a circle with a diameter of 60 cm.
  3. Stitches are made along the edge of the fabric with a thread, and then tighten. We fill it with sintepon and sew it up.
  4. Seredinku insert into the inflorescence and sew together.
  5. Next, we take shreds of fabric, preferably green, and cut out of them leaves 35 to 14 cm in size. We cut out the same leaves from the foam rubber. Now we sew the leaves from the flaps on one side, then put the foam inside and sew on the other side. Just do the rest of the leaves. Stitch the leaves along the middle in one line.
  6. From the same fabric, we cut out two circles with a diameter of 24 cm. We sew them from the wrong side, leaving a hole, turn it out, insert the foam inside. Sew up to the end.
  7. Sew the leaves to the flower. From below we sew the round base.

You can still decorate our flower pillow, sewing along the yellow center of the red buttons.

Pillow-doll

And one more kind is a children's pillow for newborns, made with their own hands. It will be the original warmer doll. For it you will need:

  • Tangle of thread;
  • Sintepon;
  • Light fabric, children's pantyhose will suit;
  • Weave a fleshy or pink color, you can take the sleeve from the blouse;
  • Piece of dense fabric;
  • A piece of soft tissue;
  • Cherry stones (they must be boiled in advance, with the addition of vinegar, and then calcined in the oven);
  • Thread;
  • Needles;
  • scissors.

Let's start:

  1. We sew a warmer doll. The body of our doll should turn out to be 24 cm high, 28 cm wide, 33 cm diagonally. Head circumference 22 cm.
  2. We cut out a cover from a dense fabric, which will be stuffed with bones.
  3. Sew the edges from the wrong side, leaving a hole. We turn it to the front and fill it with cherry bones. Sewing.
  4. We make a coverall for a doll made of soft fabric. But we sew it a little more, so that it would be easy to insert a bag with cherry bones there.
  5. Stitched from the wrong side and turn out through the hole cut in the neck.
  6. The overalls are cut from the neck downwards, a little short of the edge, so that you can put a bag with cherry pits. To cover the coveralls, you can sew a zipper or buttons. We process all edges.
  7. All 4 edges of the overalls are filled with synthepone. It is not necessary to stuff a lot. There should be 4 bubbles. They need to be tied with a thread.
  8. Let's get to the head.
  9. To do this, take a ball of threads and wrap it with a sintepon.
  10. If the head is the right size, then we tie it down with a string.
  11. We take a light fabric, better tights, and put on the head of the doll, tighten the thread at the base.
  12. Superfluous cut off, leaving a small neck, and sew. To the face was embossed, we tie a thread in the middle of the head.
  13. Now we pull on the head a solid or pink knitted fabric, so that there are no folds. Thread the band between the head and neck.
  14. Cut off the excess and sew.
  15. Now we mark the flushing face of the face. At the same stage, you can cut and sew the cap. We apply it on the head and mark the place on the head where the edge of the cap will be.
  16. From the same fabric as the jumpsuit, we sew a triangular cap for the pupa. On the edge, where it will be attached to the head, you can sew a latch.
  17. The face is embroidered with threads, hiding the nodules in the place where the cap will be put on.
  18. We sew the cap to the head, as close as possible to the rim.
  19. Rumyanim cheeks pupa.
  20. Then insert the neck of the doll into the neck and sew.
  21. Final stage- we insert inside a cover with bones and button up buttons.

To the doll-pillow became a heating pad, the pouch with bones can be put on the battery or in the microwave for 2-3 minutes and heated. This heating pad can be used for colic in the abdomen or simply put in the winter in the stroller to the baby and go for a walk.

Pillow-letter

Patterns of pillows exist various. Finally, let's talk about how to sew children's pillows with their own hands in the form of letters.

For example, take the letter "P". We need:

  • Colored fabric;
  • Fabric monophonic;
  • filler;
  • Thread and needle;
  • Ruler;
  • scissors.

Initially:

  • Cut out the big letter "P" on paper. Then we transfer it to the fabric. We cut out the letter.

  • From a monophonic fabric we cut out a strip. This strip is sewn from the wrong side to the letter. The second edge of the strip is sewn to the other letter, leaving an uncoated space through which you will fill the pillow. With a round hole in the letter "P" will have to tinker. To the second part of the letter it can be sewn through the place left for the filler.

  • We turn out.

  • Fill the pillow with filler.
  • Sew the remaining edge. The pillow is ready.

  • On the side of it, you can make embroidery with the full name of the child.

Now, such pillows are gaining popularity and many are sewing them to order.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.