Catch: a diagram and a description

For any time of the year, beret suits. Hook scheme even for beginners will be simple in comparison with spokes. This is due to the peculiarities of knitting. Headgear can be adjusted in the process of work, so that the product has taken the correct form. Let's consider some models of berets for a warm and cool season.

Spring red beret

This headgear can be started to knit from a rubber band or crown. The shape of the beret is created by decreasing and adding bars, as well as changing the thickness of the hook. After typing a chain of three or four loops, you begin to knit from the top of the head with a crochet.

Scheme and description.

• You have 8 bars without a crochet.
• In each column, tie a knob (three columns with a crochet, having one loop of the base and a vertex) and 4 loops between them.
• Alternate the "wrap" column with 4 loops in between (there should be 16 bars).
• You knit 8 fans (in one loop of the base there are four "hinged" bars) with 4 air loops (that is, on the previous column there is a fan, in the next element there is a connecting column with air loops).
• In the next row, over the fan, you fasten 4 "cone" columns with a common apex, and between them - 7 air loops with a connecting loop on the previous arch.
• Then in all the hinges, except the connecting ones, you fasten the solid "nakidnye" bars.

Red Headpiece

Continue to knit red beret crochet.

Scheme:

• Alternate * 2 columns with a crochet, 3 loops, 2 "spool" columns, 3 loops, slingshot (two "nakidnyh" columns with a common base loop) *.
• You send seven "packing" poles and a slingshot.
• You alternate 18 columns with a crochet and a slingshot.
• Knit two "nakidnyh" column and three loops to the end of the row.
• Two rows of solid bars with a crochet.
• Alternate * 2 "folding" columns, 4 loops, "fence" (two posts with one vertex and two different base loops), 4 loops *.
• You send 7 posts with a crochet, "fence".
• Alternate 2 "folding" columns with a "fence".
• You have 2 "fold" columns, 10 loops, "fence".
• The penultimate row is sewed with "folding" columns (one column of "fence" with "folding" columns along the edges has 5 columns each).
• The last row consists of half-columns.

Most often, beginners do not get berets, but "pancakes." This is due either to the free viscous or incorrect selection of the thread and hook.

Simple white crochet: scheme

• A chain of eight loops.
• 18 columns without a crochet.
• Alternation of a column with a crochet and slingshots (two columns with a crochet, tied in one loop of the base). Only 9 slingshots, as many posts.
• In place of the "folding" column you sew a slingshot, and in the same element of the previous row - columns with a crochet. Only 9 slingshots, 18 posts.
• Alternating slingshot and 3 columns with a crochet. Knitting of the slingshot is shifted by one loop in each row, so that smooth lines appear, like a flower.
• Prozvazyvaete to the end of the row slingshot with 4 "nakidnymi" posts.
• Alternating slingshot of 5 columns with a crochet.
• The next row is tying the same way as the previous one.
• Alternate to the end of the row slingshot and 6 "mantle" columns.

Once you connect the desired diameter of the product, you begin to reduce the number of columns. Eraser can be tied from simple sticks with or without a crochet. When knitting, add the beads to get a more elegant crochet (the pattern can be the same, and the beads are placed on slingshots).

Knitting from elastic bands

Some people find it easier to knit an item from a rubber band. To do this, type a chain around the head. Bars without a crochet eight rows. The resulting strip is joined in a circle by connecting bars. Add the hinges by half, that is, if the elastic band consists of 120 loops, then you should get 180 bars without a crochet.

Then go to the "nakidnye" bars. Alternate them with knobs (14 "wrappers" and a cone of two columns with a crochet with one loop of the base and a common apex). Note that 12 loops are added in each row. Addition goes between the knobs.

Having reached the desired diameter (approximately 21-23 cm.), The next 4 rows are knit without additions with a smooth shift of the bumps. Due to this, the cap "bends" (takes). The hook pattern of any headgear knits quickly due to the reduction. In this case, you subtract 12 columns in each row, while the knobs move and form wedges. The remaining 8 -12 stitches tighten, hide the thread on the wrong side.

White beret with a visor

Pay attention to the children's model with a visor. The whole accent rests on a large flower, whose second petals begin from the base of the first (as flower flowers knit). Knitting starts from the middle. Six rows in a checkerboard pattern alternate a "folding" column with an air loop.

Then the resulting oval is tied with semicolumns. Further, at the expense of the "folding" columns, half-columns and air loops, 21 petals are formed. Pay attention to their location (see the photo white crochet with flower and visor schemes). Then comes the increase and work on the second row of petals: 6 large and 21 small. The latter are uneven, so read the diagram carefully.

For a beret, one must impose leaves consisting of one large and three small petals (the same as the flower itself). The bottom of the headdress is tied with arches and "nakidnymi" pillars. The visor is last of all attached to the "folding" pillars and loops.

Beret with a visor for beginners

Such headgear with a visor can be knit for both boys and girls. Only for the stronger sex choose a simple pattern. To take it turned out more stylish, take the melange, sectional yarn. Just remember that it is very capricious and unpredictable in the sense that the product can take a wide variety of forms.

Knitting starts from the bottom. In a ring you sew sixteen columns with a crochet. Then alternate the "wrap" column with the air loop. Next, tie all the posts with a crochet (two in each air loop). A few more rows are tying with an increase due to the alternation of the "wrap" column and two air loops.

So keep on knitting completely taking the crochet. Scheme for a girl or a boy can be any, most importantly, adjust the shape of the headgear by adding and subtracting. Once the bottom is tied up by adding loops, go to the formation of the height of the beret.

Try on the product. Measure out the location of the visor, knit with convex and usual pillars. After every five convex columns, increase by one more bar. It is necessary for the visor to stand. Its shape is obtained by cutting the loops along the edges (tie the last two bars together).

"Motive" takes a crochet: a diagram and a description

Of the individual motifs, graceful head berets are obtained. The bottom line is to form first the bottom of the beret, then the sidewalls, and the elastic band to be knitted with half-beams with the strap in the tone of the picture. At the same time, the side walls are knitted without any increase, so that the edges curl.

Consider how to tie a floral openwork beret (crochet). Schemes of a lush flower will be as follows. All rows end with a connecting loop, and begin with one lifting loop. Make a sliding loop (thread folds in a circle so that you can then tighten).

• You collect an arch from three air loops and a half-pit. There are only six elements.
• Further twelve magnificent columns (in one basehole there are five "cone" columns with one top) and three loops between them, that is, on each arch of the previous row, there are two magnificent columns.
• You make an arch of three loops and half-columns, like in the first row. There should be twenty-four loop arches.
• Slip the loop tight.

Mixing motifs

We continue to consider how to knit motive children's berets crocheted. Schemes of joining elements are represented by arches from air loops and polustolbikov. For each element, leave the tails for tying the last row and attaching motifs. The ends of threads are hidden in lush columns on the wrong side.

When a second element is created while knitting the last row, immediately connect the first flowers to the first flower with the connecting posts behind the three arches of the first flower. Then the elements are joined in the same way for the three arches of the first and second flowers, and the 4th arch remains free, that is, of the 24 arches connected there must be 18, and 4 free ones.

In the next row, also attach the motifs, but take the hook thicker to increase the size of the product. Connect the flowers to the size of the head. As you can see, it turns out an unusual, stylish beret, crocheted. The outline of the headband gum is represented by usual half-columns, which are attached to the middle of each arch of the previous row. The harness consists of lush pillars and a connecting loop.

If you want to increase the size of the beret, then tie the flower several times with arches and polustolbikami. You can take a thicker thread and more on the number of the hook to also reach the right size.

Summary results

When knitting a beret, pay attention to the yarn and the number of the hook. For the headdress will suit the brand "Alize" (Alize Cotton Gold), "Jeans" (YarnArt Jeans), "Crystal", "Diamond". For cool weather, choose wool with acrylic or bamboo, and for summer - cotton. If you work with unfamiliar yarn, then first tie the sample to see how the thread behaves.

Beginners should follow the instructions, and professionals can from any pattern to tie the crochet. The scheme for a girl, a boy, an adult is different only in size. The essence of knitting remains the same: the bottom is knit with the additions to the size of the crown, correct the height of the beret and narrow the loop to the size of the forehead.