Boats with low pressure inflatable bottom: how to choose the best model?

If you pay attention to water in the high season, you can see that the rubber versions of boats are much more common than classic ones. At the same time, many believe that boats with low pressure inflatable bottom are quite difficult to operate and require special handling and pumping. The main characteristics, including the carrying capacity and speed of both options, are at an equally decent level. Also worth noting the possibility of adding a more powerful engine.

What you need to know

In order to build a boat with pajolami, enough half an hour. A little more time is needed to clean and parse the structure after operation. Here, the low pressure inflatable bottom has a noticeable superiority - it takes much less time for all the work. But for such an option it is necessary to purchase an electric pump, since swapping by hand is not the best thing to do.

Airdeck begins to buckle when the load is exceeded and the speed mark at 30 km / h, this reduces the characteristics. It is not recommended to use four-stroke motors and exceed the engine power limit. The bottom of such boats differs enough rigidity, allowing to stand confidently on it. Naturally, any variants made of rubber should be covered with a light material, for example carpet, to reduce exposure to sunlight, falling knives and other sharp objects.

Rubber boats with low pressure inflatable bottom can not be repaired in most cases. That is, if even a few connections connecting the bottom and top parts are broken at the bottom, it will lose shape. And this is in view of the fact that this part is integral and can not be replaced, as, for example, airk, which is often replaced by pail made of aluminum or plywood. Do not forget about this property and leave the swimming facility on the deck or the shore.

Advantages

Boats with an inflatable bottom of low pressure "Flagman" are characterized by imperceptible strikes about waves arising during the movement. This improves the handling and increases the comfort of using the vessel. They are also quickly sorted out and collected. To clean contaminated surfaces, it is enough to pour 20-30 liters of water into the cockpit, from which it will flow through the valves. In addition, there are a number of other advantages:

• The bottom has a sufficient level of thermal insulation, which is relevant for people who are fond of long fishing, a dense surface can even comfortably be placed in a horizontal position;
• The keel of the boat is significantly increased due to the cylinders, which are located above the bottom;
• Additional air compartments provide stability and the possibility of increasing the transported load;
• The inner beads are less prone to abrasion.

Negative sides

Despite many advantages, there were shortcomings. These include the following:

• PVC boats with an inflatable bottom of low pressure can not reach the maximum speed characteristics even at an average load level;
• High sail, which can be reduced if the passenger is placed in front of the boat or when the cargo is placed correctly;
• In spite of the small weight, in comparison with other types the boat is not folded into two, but into one bag, which causes difficulties in transportation;
• Among other ships with a tension bottom, boats with low pressure inflatable bottom have the greatest vagacity;
• The volume of the cockpit is significantly reduced due to the bulk bottom.

Use cases

Vessels with NDND are quite widespread among lovers of extreme water sports, fishermen and travelers thanks to the availability of drain valves, good handling and soft bottom. There are boats with a low pressure inflatable bottom, designed for measured walks, they are made of fairly thin materials, so the manufacturers were able to achieve a lower weight of the product. At the same time, reliability remains at the same level, although, of course, it is undesirable to overcome obstacles in the form of dense thickets.

Boats with an inflatable bottom of low pressure "Solar" Have a soft construction, while the carved models are distinguished by the presence of plywood elements, and some swimming tools are equipped with plastic or steel hard hardening. Sufficient density is achieved by bulkheads with residual zero elongation and pressure inside the structure.

Features

Airborne cylinders contain air with markedly higher pressure than in the inflatable parts of the bottom, with the creation of bleeding special valves to prevent excessive air expansion. Valves accelerate the air outlet during the disassembly of the boat and are located in the front of the structure.

Regardless of the design, the ships allow not to worry about safety during the movement due to special compartments. On boats with inflatable bottom of low pressure reviews are mostly positive, many users note their comfortable use, unpretentious care and compact dimensions in the folded state.

The available useful characteristics become relevant to users in different situations. Fishermen and hunters are important maneuverability, the ability to pass through thickets of reeds and descent from the shore, which has any height. For beginners, the main advantage is low cost and a noticeable increase in leisure opportunities. Such boats are also used by people who have motor yachts, they are used instead of boats in case of emergency situations, the probability of which can not be ruled out on any lakes and rivers. They also allow you to reach reservoirs that are characterized by difficult access and remote locations, and they are also suitable for travel with a camper.

Criterias of choice

The choice of a particular option depends on the required characteristics. The length of the boat with an inflatable bottom of low pressure "Compass" Should be selected taking into account the availability of a special transportation device (this may be an economic trailer or trunk), the engine used, the number of people carried and the size of the reservoirs.

The shape of the cylinders is very wide, which causes the lower part of the body to be classified into certain types. The most popular is the weakly keel standard form, which has an average keel and inflatable kilson. To achieve a screen effect on the cylinders are used special skegs. The bottom may have a completely flat surface. Swimming means designed for operation under extreme conditions are supplemented by reinforcement in the form of strong polyethylene materials.

Fasteners and cylinders

Cylinders are made of a fabric based on PVC, which can have a different degree of density. Rubberized material is practically not used today due to the need for intensive care. Hipolon also does not have an enviable popularity, despite the possibility of a long stay in direct sunlight. This is due to the high cost.

Connections of the form of lyktros-lypidaz and balloon loops are used for fixing attachments and seats. The first option is characterized by greater functionality and convenience, because of this it is found on the main part of the boats of various manufacturers.

Reviews

The "Taiga-270ND" PVC boat, according to users, is optimal for fishing and long trips, the design features reduce fatigue while staying in it for a long time.

On the AIR E330LT Gladiator, reviews are mostly positive, they have acquired prevalence due to their high strength characteristics.

The boat "Gladiator E 380 AIR", according to the owner, perfectly keeps on water and is equipped with a powerful motor.