Advantages, features and installation of window air conditioners

Against the background of modern split-systems, the window conditioner remains popular . The advantage of such a device is good functionality, the possibility of installation in private and office buildings, the ability not only to cool, but also to heat the air. In addition, the device has a small cost. The only drawback of this design is that it can obscure most of the window. If the room is sufficiently light, then this flaw is not serious.

Installation of window air conditioners involves choosing the most optimal location. You can carry out the installation procedure yourself, and it will not take you much time. Since the device is powered by an electrical network, then it must be installed in the room where there is an outlet, and the cord of the device must reach it without carrying it.

Installation of window air conditioners should be carried out in a place where they will not get precipitation. In addition, the devices must be equipped with metal protective caps. Also pay attention to the distance between the device box and the ceiling. It must be at least 20 cm. When selecting the unit, pay attention to its power and noise level.

Installation of window air conditioners provides a certain sequence of work. First of all, in the window opening or under it, make appropriate holes for the device body. It should be somewhat larger than the air conditioner itself. Next, you should mount a special profile structure into the hole, in which the device will be located.

Installation of window air conditioners provides fastening of the block to the prepared frame. After installation, you will have gaps around the perimeter of the device. In order to eliminate them, apply a mounting foam. At the same time, we must ensure that the level of the block is not violated.

Installation of air conditioners is cheap, especially if you decide to do it yourself. During installation, it should be noted that part of the unit must be on the street, so it is better that it is located in the opening of the window. However, there is no need to use freon hoses.

The device should be slightly smaller than the window opening, so for the correct choice of the unit, try to carefully fix all the necessary dimensions. All the work is done indoors, so you do not have to spend money on the services of climbers or special high-altitude equipment.

Correct installation of the window air conditioner ensures effective and durable operation of the device. In order for it to make a minimum of noise, you need to fix it very firmly. Make sure that the device does not get direct rays of the sun. And also pay attention to the distance from the outer cover of the device to the nearest obstacle (wall). The minimum value should be about 50 cm. Only in this case the device will work qualitatively. Good luck!