A firefly for night fishing how to make your own hands?

Experienced fishermen argue that catching at night is more effective than during the day. Especially if the target is a large specimen. There are varieties of fish that can be caught only in the evening or at night. When planning such a sortie on the reservoir, it is necessary to carefully consider the set of gears.

A firefly for night fishing is a simple but necessary device. It can be purchased at any profile store. But if there is a desire and enough free time, this device can be made with your own hands. This will require the most common tool, which is often in the arsenal of the home master, as well as the initial skills of working with him. Doing your own gear is not only easy to create a quality firefly, but also interesting to spend time.

general characteristics

In the twilight or night darkness, many methods of fishing are permissible only when using a backlight. Some use special sound alarms. But these calls are not always effective, especially with careful biting or frequent bait transfer. A firefly for night fishing is considered a more acceptable option. He does not make heavy tackle. But without this element it will not be possible to fish in the dark.

There are chemical and electrical devices. The first variety to create at home is almost impossible. All components of such capsules in the air lose their properties or simply evaporate. Therefore, they are manufactured exclusively by the production method. But electrical types of equipment can be done on their own.

Advantages of purchase models

Thinking over whether to make a firefly for night fishing with your own hands or buy it in a store, weigh all the pros and cons. Purchased varieties are inexpensive. They are universally represented on a free sale. Such lamps can easily be transported to a pond. In operation with them, most often, there are no problems. If there is no particular desire to bother with the creation of electronic fireflies, it is easier to go to the store and buy several pieces of chemical capsules. This option is ideal for those fishermen who do not have enough free time or skills in working with the tool. But the fans of fishing know what pleasure the process of creating self-made gear brings.

Disadvantages of purchased products

However, there are a number of shortcomings that chemical isotopes possess. Fireflies for night fishing in capsules are used only once. Each role is designed for no more than 10 hours of glow. In case of accidental ingestion of the substance on the skin, some people experience an allergic reaction. Also it should be noted some inconvenience when casting. The scaffold can cling to the ampoule. The brightness of the glow of chemical species can not be adjusted. Therefore, in some devices it is very strong. If the blue color of the radiation is selected, the eyes can quickly get tired. There are situations when the elementary stock of capsules is exhausted, and it's too late to go to the store. Independently make a firefly will not be difficult.

Features of electric fireflies

On sale there are, but in less quantity, electric species of fireflies. Most often they are made independently, than they acquire. Simplicity of design distinguishes such fireflies for night fishing. LED varieties are the most popular. They consume little electricity, their glow is soft. The main advantage of electric varieties is their reusable application. Therefore among fishermen who prefer to do the gear themselves, this device is considered the most popular. It consists of 3 small round batteries and LED. They are placed in a demountable capsule. If necessary, the batteries can easily be replaced. The technology for creating such fireflies deserves a detailed consideration.

Diode firefly with your own hands

When you are going to make an electronic firefly for night fishing with your own hands, you should buy the diodes of the required brightness. You can unscrew a light bulb from a conventional Chinese lighter. To do this, the bolt is unscrewed on the body. Then, the diode is taken carefully. It adjoins the capsule with 3 round mini-batteries. Glow occurs after touching the iron plate against the diode leg. The chain closes.

Such a ready-made system is installed on a rod. You can create a diode circuit yourself, but this option is one of the simplest. It will require the minimum amount of effort, cost and time. If desired, you can use mini-finger batteries. The duration of the device will increase significantly. However, in the first version it will be a reusable firefly. Its properties are fully suitable for night fishing.

Features of the device

Creating fireflies for night fishing on batteries, the master will be interested in knowing about its properties in advance. The work of the device was tested in conditions of night fishing. A number of positive characteristics were established. The system of diodes with batteries of lighters worked 2 full night fishing. At the same time, the whole structure did not overheat.

As for the weight of such a firefly, it turned out to be larger than that of a chemical capsule. However, even in the conditions of feeder fishing, it did not affect the sensitivity of the vertices or the casting distance. Also, the accuracy of sending the feeder did not change. The advantage of a diode firefly was a beam pointed upwards. Eyes did not get tired during the night fishing. The light can be clearly seen from different angles. The device is fairly simple, but effective.

Modification of the scheme

Some fishermen have improved the presented system. To do this, they make a draw-out firefly. Night fishing from this only wins. If in the arsenal of the master there is a soldering iron and a little wire of a small cross section, you can divide the diode with the elements of its power. This will ease the load on the top or float. There is no cardinal difference, of course. But for greater accuracy of the signal this will be a good solution.

The wire is soldered to the diode. It will connect the light bulb with the batteries. The power supply is attached to the handle or slightly higher. The wire is attached to the rod by scotch. In this case, to measure round small 2-finger batteries will be easier. This greatly increases the duration of the glow of the diode. If for some reason the light bulb from the lighter does not fit, buy it yourself. For these purposes, white LEDs LR41 are suitable. The store will simply pick up the brightness. This will make the process of night fishing as comfortable as possible for the fisherman.

How to install a firefly

Fastening of fireflies is performed depending on the type of tackle. If the fishing rod has a float, the device is attached directly to it. The system is placed in a transparent tube. It stringed on the top of the float. Even for gear with thin antennas, such tubes and fireflies are used for night fishing. How to use this device is of interest to beginners. Professionals know that you need to put 2 elastic bands on the float antenna. Already they are attached to the tube.

If the fish is supposed to be caught on the feeder, the firefly is placed on the top. For this, 2 rubber bands are also worn on it. The LED in the capsule is placed in the space between them. A firefly is best treated with scotch tape. This eliminates the possibility of fishing line hooks. On sale for fixing fireflies are special plastic clips. When you use them, it will be easy to install the device.

A few recommendations

Beginning fishermen will not be out of place to learn some recommendations on the use of fireflies. These are simple rules, which you can not worry about about the durability of the device. Fireflies for fishing at night is important not only to properly strengthen, but also to operate carefully. Switch on the system immediately before the first cast. So the batteries will last longer.

There should be no gap between the capsule with the LED and the rod. To do this, the firefly is tied with tape to the base. Getting the feeder out of the water, you need to monitor the line. It must be a blow. With this method of catching the feeder is put on the pedestal smoothly (so that the vertex with the LED is not loosened). Before casting, the line is checked for slippage smoothness. She should not interfere. This prevents tackling. The use of fireflies will be comfortable.

Firefly from foil

In addition to the above method, you can make a homemade firefly by other methods. A very popular approach among fishermen is the use of a reflector in the form of foil. To make such a firefly for night fishing, you need its white or yellow variety. The foil sheet is cut into strips 5 mm wide. To the float fasten the strip with a waterproof glue.

To see the bite in the dark, you need to turn on the flashlight. Its beam is directed to the foil. This is enough to distinguish the bite in the dark. If the weather is windy, the foil is folded into several layers to give it stiffness. The source of light can be even an ordinary flashlight. Its brightness will be enough to illuminate the reflector. The simplicity of this approach was to the liking of many fishermen.

Alternative fireflies

Improving a firefly for night fishing, which is made by own hands, fishermen come up with different versions of systems. Has the right to exist the idea of creating such a tool from a jar of ascorbic acid. In the empty container from the vitamin set a bright LED and batteries. A window is cut in the box (you can make several holes).

Another interesting solution when highlighting tackle is the use of special paint. It is purchased in special stores. The paint can glow in the dark with a phosphorous color. It is applied to the float or the tip of the feeder. If, for some reason, the paint is incompatible with the base material, a plate is made of wood. It is similar in shape to a chemical firefly. It is dyed, and then fixed in a standard way to the tackle. Therefore, when planning to catch, it is better to give preference to the electrical varieties of devices.