Woodworking combination machines for home

To date, anyone can buy a woodworking machine in the house. With its help you can perform many functions. The above devices can work safely with plywood, various chipboard and other wood materials. In terms of dimensions, the machines are quite different, as well as their functional parts. The nominal power of the devices fluctuates around 2500 Watts.

Depending on it, the operating frequency of the model also changes. Many consumers, choosing a machine for the house, pay attention to the range of angles of the saw. Also important is the size of the table itself. The depth of the cut may be different, and this should be taken into account.

What is it for?

Using woodworking combined machines, it is possible to be engaged in angling at an angle. Another process is called planing. In this case, the rib can be placed calmly.

If the workpiece is of a small size, then there is the possibility of making planing along the edges. Cutting can also be done in many ways. In some cases, it is necessary to make it across the fibers. Using the correct power tool, you can always change the position of the workpiece without problems. Also it will allow to do sawing wood strictly along the fiber.

Machine tools of the company "Zenitek"

Woodworking machines combined (universal) of this company dimensions are optimal. For jointing, many models fit perfectly. The maximum diameter of the cut varies around 250 mm. The depth of cut can be adjusted with the help of a lever. The end milling cutter in all models is installed with a diameter of 12 mm.

The saw table is included in the set quite comfortable. Adjust the workpiece on it can be absolutely calm. The rated speed of the shaft is 7 thousand revolutions per minute. The voltage of the device is on the average at 230 V. The protection system in all models is reliable.

Feedback about models "Starm"

The company "Starm" combined woodworking machines reviews are good, and many buyers prefer models of this brand because of the convenience of their use. Angles for sawing can be put up any. For planing on a plane, woodworking combined machines are ideal.

They can also be used for milling, and this should be taken into account. The guard for the saw blade is included in the standard kit. Also in the kit to the machine you can find a wedge. For cross-cutting wood, manufacturers have provided a special holder. Its angle can also be adjusted. From the knife shaft the machines have a guard rail.

Overview of the machine "Pioneer D-300"

Woodworking combined machine D300 in its parameters is pretty much inferior to modern analogues. This is due primarily to the low power of the device at 1500 watts. In addition, it should be taken into account that the limiting frequency in the mechanism hardly reaches 40 Hz. Thus, in a minute the shaft makes little speed.

By cutting wood the maximum angle there is the possibility to expose 45 degrees. The diameter of the disk mill The woodworking bench (combined) has 125 mm. A fitting hole is provided for it by the manufacturer. The depth of planing in this model can be adjusted by controlling the lever.

Reviews about the models of the firm "Stark"

Many buyers choose woodworking combination machines of this trademark because of their high quality. Most models can be used for straightforward wood planing. The jointing of the workpiece at an angle can also be performed. The engines are installed only asynchronous type, and their nominal power fluctuates around 2300 W on average.

Protective casing devices are equipped. Connect the vacuum cleaner to the mechanism is possible, thanks to this workplace will always be clean from dust. The power of woodworking machines is provided only from a single-phase network. For a minute the shaft is capable of making more than 5 thousand turns. The drill chuck in the standard kit is provided with a diameter of 15 mm. The operating frequency of the device is around 45 Hz.

Features of devices "Gover"

The machines of this company make it very convenient to adjust the cutting angle. At the same time, the locks are quite reliable. Due to this, the workpiece can be well secured during operation. Planing on the plane can be done. For straight-line planing, woodworking combined machines are not suitable. However, edge contouring can be performed quite qualitatively.

At idle, the shaft makes more than 5500 revolutions per minute. The depth of planing is a maximum of 3 mm. The length of the knife, which is included, is 240 mm. The saw blade, as a rule, has a thickness of 1.8 mm. Among the shortcomings, it should be noted the loudness of the instrument. At a distance of 10 meters, the device produces an average of 89 dB.

What are the characteristics of the machines "Jet"?

The motors in all models are single-phase mounted. Working capacitors in them are available in the "C6" series. The nominal voltage of the models fluctuates around 230 V. The deviation with this maximum can reach 10 V. The operating frequency of the mechanisms is at 43 Hz. The dimensions of the tables are very diverse.

You can adjust the position of the workpiece with the help of retainers. The protective cover is installed in woodworking machines. The range of the angle of the saw cut varies from 0 to 45 degrees. The diameter of the hole is 30 mm. In turn, the thickness of the disk cut is 10 mm. The depth of cuts in all models can be adjusted.

Parameters of the models "Corvette"

Models of this trade mark are most suitable for milling. Planing of wood on the plane can be done. In addition, woodworking machines in household conditions are often used for longitudinal sawing of the workpiece. You can do it from a corner or an edge. The nominal power of the models is around 2450 watts. The motors are mounted on frames of exclusively asynchronous type.

At idle, the shaft turns up quite quickly. The maximum depth of planing of wood is 3 mm. The saw blade is included in the kit with a diameter of 250 mm. You can connect the vacuum cleaner to the devices. At the same time, dust is absorbed immediately during operation.

The Russian manufacturer "Energomash"

Many woodworking machines (combined) for the house of this trade mark differ from other devices by their productivity. This is largely due to the installation of additional sliding bearings. Spacers in the woodworking machine can provide rigidity of fixing the workpiece. The security system in all models is installed. At the slightest malfunctions in the mechanism the blocker works instantly.

The lower frame in the machines is welded, but it is distinguished by increased reliability and is capable of withstanding heavy loads. The accuracy of wood processing is provided by means of retainers. The angle can be adjusted by changing the position of the lever. Milling work can be performed on machines of the most diverse. For planing at an angle, the models of the above company are suitable well. In addition, in domestic conditions, it is possible to easily engage in both longitudinal and transverse cutting of the workpiece.

Woodworking machines "Titan"

The maximum width of planing for the models of this company is on average about 200 mm. The depth range can be adjusted from 0 to 5 mm. The diameter of the saw blade is 200 mm maximum. The end mill is 12 mm in size, and the saw blade hole is 32 mm. Tables of dimensions are very diverse.

Rotation of the knife shaft can be carried out with a single lever. The engines in all models are provided by the manufacturer asynchronous type. Condensers in them are available with the label "C6". The nominal voltage of the power tool fluctuates around 200 V. The operating frequency is at the level of 30 Hz.

Reviews of models "Caliber"

Many buyers choose household combined woodworking machines of the specified company due to their multifunctionality. Work on them can perform a wide variety. The protective cover in all models is provided by the manufacturer. For dust removal, the vacuum cleaner can be connected to the mechanism. The drill chuck in the standard kit is available with a diameter of 15 mm. Engine power averages around 2500 watts. At idle speed, the drive shaft makes more than 5,000 revolutions per minute.

At the same time, the accuracy of wood processing is high. Adjust the angle of cut in all models can. The holders on the tables are fixed very firmly. Due to this, the workpiece can be installed in almost any position. The mechanism for changing the cutting angle is available, and the safety guards are included in the standard kit. As a result, we can say that the models of this brand are equally effective in coping with planing, jointing, and sawing wood.