TechnologiesCell Phones

Want to learn how to flash a Chinese phone?

To date, phones from China are gaining increasing popularity. This is primarily due to the fact that the prices for these devices, in comparison with other brand models, are much more affordable. But in recent years, phones from China have become different additions in the functionality. They have functions that Western counterparts can not boast of. Maybe it would not be a problem, but the Chinese-made phones are endowed with one serious flaw - a low-quality assembly. And it is this that causes all kinds of trouble. Of course, there are ways to eliminate the shortcomings, and here we will look at them, and also learn how to flash a Chinese phone.

The main reason for which it is required to flash a Chinese phone is its Russification. To do this, all memory is drained from the device, and then processed. After processing, all data is poured back. This is the whole focus of the firmware.

Before you can flash a Chinese phone, you need to get FlashTool. Let's take a quick look at how it works. First you need to run the program. After clicking the "DownloadAgent" button, select the item "MTK_AllInOne_DA." Scatter. " After that go to the options, here we need "com port". Then choose the port to which you connected your phone. Return to the options and find "baud rate".

Go to the tab "readback": here after clicking on the "add" button the entry "NA 0x00000000 0x00000000ROM_2" should appear. With a double click, click to the right of the letters NA. In the window that appears, specify the file "back up".

Press the "readback" button and turn on the phone. On the screen below, a red line should appear, and a little later - the type of processor in the left corner and the marking of the memory chip in the right.

Go to the "download" tab, press the "format" button and then "manual format FAT". Do not press the power button for more than one second. As a result of this action, a green bar appears on the screen below. At the end of these procedures, turn on the phone.

As you can see, everything is quite simple. And now let's see how to flash a Chinese phone for troubleshooting.

There is one good program - Spiderman 2.50. It allows you to flash phones from China, which work on the processors ADI, Spread, MTK and others. Immediately need to be reminded that for the firmware it is necessary to use exclusively suitable programs. This will guarantee the correct operation of the phone. And for insurance, keep your native firmware.

So, let's begin. Open the program and click "Connect". We also put the required COM port number. Set the speed we need (115200), and then press the "Boot" button. In case of correct operation, you will see the process of parameter determination in the work area. After a while, they should also appear.

The main thing here is not to miss an important moment and to save the native firmware on your computer. To do this, use the "Read" button.

To flash the firmware on the phone, use the "Flash" command and wait for the program to close. Let's remind once again, that the given program should as much as possible coincide on characteristics with the original. I must say that it is quite simple, and most importantly - effective. And the question of whether it is possible to reflash the Chinese phone, the answer is one - yes! But it will be better if professionals deal with this matter. Here, as in any other case, there are many nuances and pitfalls. Therefore, before you can flash a Chinese phone, examine the information that concerns this question.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.