Wallpaper on non-woven basis: advantages and features of gluing

Wallpaper on non-woven base for today are very popular. For example, everyone knows vinyl products, which are characterized by a wide variety of combinations of colors and patterns. At the heart of such wallpaper lies nonwoven. When the vinyl is properly sputtered, the material retains the ability to pass air. And he can have a beautiful relief, which will make the room original and cozy.

Wallpaper on non-woven base have a large number of advantages. For example, some types of material can be painted in any color, so you can quickly refresh the room without eliminating the glued decoration. Naturally, the repair time is significantly reduced. During the pasting of such wallpaper there is no need to apply the substance to the material itself. You just need to smear them with a wall. In some cases, the thick base of the wallpaper can eliminate small irregularities and defects on the base surface. And they can be glued in technical rooms. The fact is that wallpaper on a non-woven base does not succumb to moisture, does not swell and does not exfoliate. Therefore, they can be used to repair the bathroom or kitchen. In addition, the base of the wallpaper is very strong, as it is made of cellulose fibers.

Rasch wallpaper on a non-woven basis is very popular. They benefit from excellent quality, increased safety and aesthetics. The presented material is manufactured using the most modern technologies. Many experts work on the design of each wallpaper model.

The presented material is very practical, but it needs to be properly glued. Work with him is not so difficult, if you know some of the nuances. Once again it should be repeated that it is necessary to glue wallpaper on a non-woven base on a prepared basis. Itself is not necessary to smear the canvas. Glue must be diluted strictly according to the instructions, in addition, you should choose the right material for this type of material.

During operation, be very careful that the adhesive does not fall on the pattern of the canvas. You can start the gluing procedure from any angle. The fact is that you should join the canvases. The very first band should be attached as flat as possible. In the corners often have to glue the canvas overlap. However, it should be optimal so that the edges of the strips do not protrude. If on the processed surface all the same there were folds, then the wallpaper should be cut and smoothed.

Pasting wallpaper on a non-woven base with a volumetric pattern requires their alignment with a soft roller. The sequence of work is very simple. First, cut off the web of the required length from the roll, then spread the wall with glue and apply the strip to the surface. Using a roller or rubber spatula, smoothly but gently smooth the wallpaper. And we do it in such a way that the excess glue goes to the side where the strip is not attached yet. In this way we carry out the entire procedure. That's all the features of working with wallpaper on non-woven basis.