AutomobilesCars

Tuning Niva by yourself - create your SUV

When buying a car Niva, few people think about using it exclusively as a vehicle for off-road driving. Basically, everyone plans to use this four-wheeled friend in urban conditions and periodically travel to rural roads. However, sitting behind the wheel, almost every driver has an irresistible desire to experience this car. But with this it is not necessary to hurry! First of all, you need to think how you can improve and protect your car for this. How to make the tuning of the Niva off-road cost a minimum amount, but at the same time was the highest quality? If the mind to approach this matter, in the end it will turn out a good all-terrain vehicle for any terrain and any roads.

It is entirely feasible to perform tuning of the Niva by yourself. First of all, you should pay attention to the winch. With its help it will be possible to solve the problem if suddenly the car gets stuck in the mud or sits on the "belly". Particular attention should be paid to the power of this device. It is better not to buy a winch if its pull is less than two and a half tons - this option is very weak for this car.

The main problem everyone will face, who started tuning the Niva with their own hands, trying to install a winch, is the difficulty of fastening. After all, there is no possibility of installing this mechanism on the base version, so several options should be considered. You can purchase a special pad, but here you will need an additional fixation, as in the standard version it is designed to be fastened to the edges of the side members by three bolts, and the thickness of the metal in these places is not enough. It is also possible to install kanguring, but with additional gain. In addition, you can install on it individual lights, but there is a risk of breaking them on potholes.

The next stage for those who do tuning Niva own hands, will be the choice of "soles" for the car. In this case, it is better to trust the experience of tuners and to establish the most optimal option - tires with a dimension of 235/75/15. But it should be borne in mind that with a maximum of turned-out wheels, a slight twitch is possible, although this problem is insignificant.

In the future, carrying out tuning Niva own hands, it is necessary to increase the clearance. It is best to do this in a car repair shop, but it is possible to perform this procedure at home. Consultation may be required! At home, the front wing is not a problem, but on the back arch you will need welding work at a professional level, because there are vent pipes and a fuel tank. To do this, it is better to use the services of a master. When choosing shock absorbers, the front base can be left, but the rear ones need to be strengthened. Especially in the details do not need to, the main thing is that the rigidity was greater than the base version.

The last point of the technical part of tuning will be preventing the possibility of water entering through the breathers in the gearboxes. To eliminate this problem, it is necessary to raise the vent pipe to the desired height, for example, under the hood. After tuning the technical part, you can go to the design elements.

Tuning salon Niva can be performed in a huge number of options. The main thing in this - the interior, as, indeed, the exterior, select according to the individual requirements of the owner of the car, because the tastes of all are different.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.