The size of the heated towel rail. Towel dryer in the bathtub: how to choose

The size of the heated towel rail is one of the important criteria to look out for when selecting. Whatever the device, you can make it stand alone. To do this, do not need to stockpile some special materials and tools.

Dimensions of heated towel rails

In the market of sanitary equipment today you can find towel warmers of different diameters. If it is about ¾ ", then the outer diameter will be 25 millimeters. These products, as a rule, have a modification of the P- or M-type. If it is a diameter of 1¼ ", then the outer indicator will be equal to 40 millimeters. Such constructions are most often performed in the form of a letter P, on sale they are quite rare. This is due to the fact that it is quite difficult to produce them because of the large diameter of the pipe used.

You can find on sale and 1 "towel warmers, the outer diameter of which is 32 millimeters. This category includes most of the models of the classical type, among them one can distinguish F-shaped drying, ladder, and also foxtrot. The size of the towel must match the dimensions of the apartment. Determine the parameters of this design can be one technology. If the temperature of the coolant is equivalent to 70 degrees, then the ratio of the room in which the installation will be made, in the capacity of the equipment should be 2.5 m 3/100 W. It is necessary to take into account the location of the connection. After the place is defined, and the area is calculated, it is necessary to add 10 cm on all sides.

The choice of the towel at the cost

The size of the heated towel rail and its material largely determine the price range of the structure. In the market you can find devices, the cost of which varies from 300 to 4000 dollars. This indicator will also affect the style, as well as the manufacturer.

Features of the choice of a heated towel rail

If you need a towel heater in the bath, then first of all you need to pay attention to the material that underlies the product. This can be stainless steel, black steel, as well as brass and copper. As for stainless steel, it can quickly break down. As an exception, radiators are used whose wall thickness varies from 2 to 2.5 millimeters. It should be remembered that the cost of such units will be much higher.

Black steel, brass and copper

After the size of the heated towel rail is determined, it is necessary to pay attention to the material, which can be made of black steel. Such devices have an internal anticorrosive coating. Because of this, they are considered the most reliable and durable. This option will be an excellent solution for a flowing towel heater, which will be connected to a hot water supply system .

If you want that the room was as warm as possible, then you should choose brass or copper towel rails. Among their positive features can be identified that such models have the highest heat transfer. They can be successfully used if in the product passport you can find information that the internal surface assumes the possibility of connection to the DHW system.

Design features

If you need a heated towel rail in the bath, it is important to pay attention to the design features of the product. In addition to the classic, on sale you can find other varieties of similar units, the design of which can solve the problem of connection to the hot water. Such devices have a higher cost compared to conventional ones, but their life is practically unlimited. They are better able to warm up the room and can be used for the intended purpose throughout the year. We are talking about two-circuit products. They are difficult to connect, but after they will be effective.

The stainless steel towel warmer can also last a long time if you choose a model with an impressive wall thickness.

One of the circuits of the above-described equipment will need to be connected to the central system. It has protection against high temperatures, pressure, and also has an anti-corrosion coating. The heat that passes through the first circuit will be transferred to the second circuit. Manufacturers produce models of different sizes and styles. If we talk about imported factories, in their conditions the walls are covered from the inside with a polymer compound. Such devices should not be connected by soldering technology or using other high-temperature effects.

Towel dryer with gravitational heat exchanger

Towel dryer "Sunderzha" can have a slightly different device in comparison with the above. In this case, the product is made using thin-walled pipes that have a gravitational heat exchanger. The connection is made to a metal one-piece thick-walled pipe. The latter cuts into the hot water system. This ensures the heating of the heated towel rail from the hot water that flows through the inner pipe. In this case, the product is protected from negative effects of water. It should be taken into account that such models have a somewhat reduced temperature at the output. However, due to the fact that the radiation area is sufficiently high in comparison with the average coil, the temperature in the room will remain high.

When choosing a Sunderzh towel dryer, it is important to pay attention to the supply of pipes and the step between them. The approach can be lateral or inferior. As for the first case, the lead can be left or right. Therefore, it is important to pay attention to these parameters when choosing a particular model.

The choice of the towel according to the installation method

Dimensions of water towel rails, which were mentioned above, it is important to consider when choosing. However, it is necessary to pay attention to the method of attachment. You can choose one of the three existing types of installation. Thus, the structure can be wall, portable or floor. Among the wall manufacturers are not only water, but also electric models. If it is a question of floor systems, it, as a rule, water designs whereas portable are only electrical devices. Their advantage is that they provide freedom of movement.

If you want to work in a room with a limited area, then you should prefer the wall-mounted version. In this case, the unit does not take up much space, and it can be installed using a conventional bracket. If you can not choose between models that are installed on the floor or attached to the wall, it is better to give preference to the latter option. This is especially true for small rooms, where a lot of appliances and furniture are on the floor. If in the room only the lower part of the wall is tiled, then it will be necessary to decide whether the towel heater will be located below or above. Manufacturers offer models that have a level difference.

Additional Items

If you want to choose a good towel warmer, you can consider options that assume the availability of additional shelves and hooks. This will expand the functionality of the product. However, it is important before buying to think about how much such additions are necessary in everyday life. If you abandon unnecessary functions, then this will save you not only money, but also free space.

Conclusion

Heated towel warmer will allow using the device with greater efficiency. However, in any case, you need to choose a model that will not be able to clutter the space and provide the ability to connect to a hot water supply system.