System for sliding doors: types, mounting features

The sliding door system of the cabinets and the design for separating the interior space is an extremely popular solution that is used to save space. The variety of such options today is simply amazing. Let's look at the main types of systems of this category, we will understand the features of the installation.

Design features

The system for sliding doors is offered to the customer in a complete form and consists of the following elements:

• Canvas;
• Door frame ;
• Set of upper and lower guides;
• pens;
• Accessories.

Aluminum system for sliding doors

Sliding door frames made of aluminum profile open the possibility for installation of up to 5 m high sheets. The presence of roller ball bearings ensures extremely smooth, compliant and quiet door travel. All functional elements are hidden inside the floors, which positively affects the overall appearance of the installed structure.

Along with aluminum rails, a system for sliding doors with a glass can be used. This option looks extremely attractive for interior design in the style of high-tech.

Steel system for sliding doors

Steel systems are particularly robust and therefore have a long service life. Such sets are equipped with high-quality roller mechanisms, which are protected from falling out of the guides.

In comparison with expensive aluminum, the steel system for sliding doors acts as a model of the optimal price-quality ratio. In this category, a wide variety of fabrics made from a wide variety of materials is available. As a result, the user gets the opportunity to find exactly the solution that fits as much as possible into the interior of a particular room.

Mounting Tips

How is the sliding door system installed? The following tools, components and materials are required for the work:

• A set of fasteners (self-tapping screws, anchors, finishing nails) ;
• drill;
• Screwdriver;
• a hammer;
• Screwdrivers;
• Door set (upper and lower guides, frames, door leaf, set of rollers, sealant).

Before the sliding door system is installed, the old structure must be dismantled. For this, everything is removed, including the box. At the end of the dismantling, the walls are leveled, the cracks and cracks are carefully sealed.

The necessary measurements are made. The width is measured at the top, bottom and middle. The height of the opening is determined in a similar way.

First install the lower guide. One of its sides should go 5 cm beyond the doorway. The upper guide is then installed. The latter is attached to the beam and built into the opening. In conclusion, the upper guide is strengthened on both sides by stops, which will prevent any expansion of the leaflets.

After performing the above actions, you can proceed to the installation of the door leaf:

• The plane is planted behind the decorative panels;
• The end faces are joined with the upper roller mechanism;
• The canvas rests on the lower rollers.

Upon completion, the work quality inspection is mandatory. The valves must be actively rolled in different directions. Such actions make it possible to ensure the smooth functioning of all mechanisms, to make sure that the doors will be smoothly closed and opened during operation.

Eventually

Sliding door systems destroy stereotypes. Most people think such solutions are not very practical. However, the inconveniences that arise in the course of operation due to the habit of standard designs disappear quite quickly. As a result, the user receives an extremely original, practical solution for dividing the interior space.