SSD for a laptop: better, faster, more reliable!

Now SSD drives for laptops are becoming more popular. When compared with conventional devices of this class, they have a number of advantages. Among them We can distinguish the following: speed, noiselessness, low heat dissipation and no defragmentation. Like everything else in this world, such adaptations are not without drawbacks, the main ones of which are high cost and limited resource of writing and reading cycles (this figure is at the best 100,000 times, which is very little). Despite the drawbacks, SSD drives for laptops are becoming an increasingly popular solution.

What it is?

At the heart of such drives is a set of memory chips. It is because of this that they are sometimes called solid-state. Also in the composition of these devices is necessarily a controller, which is responsible for organizing the storage of information and work Media with external devices. The speed of exchange depends on its quality and model. The better it is, the higher the data transfer rate.

The term SSD comes from three English words: Solid State , which is translated into Russian just like it sounds - a disk. The interface for connecting such devices does not differ from conventional magnetic disks. Simply put, instead of such a device you can put HDD and vice versa. But the hard disk SSD for a laptop looks preferable. He has a number of advantages and if there is an opportunity to put it exactly, then the choice is obvious.

Another important nuance - there is no need to periodically perform defragmentation. Access to any of the memory cells is independent of its location and is absolutely the same. It is due to this that such drives significantly benefit from magnetic disks.

Firmware

An important component in the operation of such devices is firmware. With its help, algorithms for reading and writing data are improved. Accordingly, the performance can be improved. Even the same controller with different firmware can show results that differ at times. Therefore it is extremely important to monitor the relevance of the software version of such a drive and, if possible, update it. As a result, this parameter of SSD drives for a laptop is very important, and it should periodically pay due attention.

How to install?

The most widespread to date are such devices in a form factor of 1.8 or 2.5 inches. Very rarely there are disks with the format 3.5. There is no nothing unusual. There are special pockets - adapters, with which you can install the 2.5 device in 3.5. In turn, for mobile PCs, such dimensions fit just perfectly. Therefore, when replacing one drive on another, it is enough to remove the outer cover above the disk (it is fixed with 2 or 4 bolts). Then the bolts fixing the drive itself are removed. Next, carefully for the "tongue" you need to remove the old drive and put a new one in its place. For reliability, you need to use the same "tongue" to firmly install it in the appropriate connectors and secure with bolts. Then the lid returns and is bolted. This completes the installation of the SSD in the laptop. But this algorithm is valid only for those cases when there is a separate compartment for the drive. If the case is one-piece, then it's better to take the laptop to the service center, where they will do this operation.

Conclusion

It is possible with great confidence to say that a drive of the SSD type for a laptop is the right solution. For such devices - the future, and they are not yet expected to have an alternative.