Roller shutters in the toilet for a sanitary unit

Roller shutters in the toilet today are installing an increasing number of owners of apartments and private houses. This design is designed to hide in the false wall of communication. In the hollow space can be located not only water supply and sewage systems, but also filters, water heaters, as well as water meters. Such a bathroom addition will not only be practical, but also attractive enough, as well as functional. Roller shutters are installed during the repair of the premises simultaneously with the replacement of communications and the installation of meters, as well as additional equipment. This requirement is due to the fact that it is at this stage that a niche is being formed, and also a suitable curtain is selected. Consumers choose this approach also for the reason that it allows easy access to the pipes. Choosing roller shutters in the toilet, you should not try to save, because high-quality products of this type are able to provide more and quite good noise insulation.

Design features

Before you start work, you need to familiarize yourself with the characteristics of the described products, this will allow you to carry out installation works that do not assume the need for alterations. Roller shutters in the toilet are a blade that consists of slats. From above the curtain is wound on a shaft located in a protective box. Inside the upper part there is a spring, which is designed to balance the weight of the blade, except for unwinding roller blinds under its own weight. This function is necessary for fixing the lamellae without the lack of fixing. Before starting the manipulations, it is necessary to measure the width of the opening, if this figure is less than 52 cm, then the roller shutters can not have a spring mechanism. For this reason, it is necessary to mount the blinds, which have a cord mechanism.

Installation Methods

If you decide to mount roller shutters in the toilet, you need to know about all the ways of mounting. The process can be carried out in such a way that the box is located inside, outside or superimposed on top. The method of work should be chosen, taking into account the specific design of the opening.

Roller shutter installation inside

This approach is the more optimal solution. At the same time, it is important to make sure that the communications allow the box to be deepened. Measurements must be carried out after the wall is finished. But these manipulations are performed until the tile is laid. This will fix the construction on the wall. In the future, when used as a finishing decorative tile material, it should begin to be laid from the installed structure, gradually moving to the doorway. In this case, it will be possible to obtain the effect of heating the guides to the thickness of one product. While the seam, located between the guide and the finishing materials, will be completely invisible.

Roller shutter installation outside

If you decide to install roller shutters for a bathroom closet in the toilet, you can carry out the work by installing the box from the outside. This option is relevant in the case when the communications are in the immediate vicinity of the opening, and the box is not possible to place inside. Measurements should be carried out after the tile is on the side walls. Mounting will need to be done directly on the decorative material.

Tips of the master

Tiles, which are laid on the side surfaces, should go into the opening for 5 cm. This will allow visible concave side of the structure elements. If the cladding has already been completed, then the design should be finalized by installing it on the tile. Mounting in the opening will reduce the useful width by double the width of the guide. This figure is 53 millimeters on both sides. The useful height will also be reduced, but in this case the height of the box. If the opening is very low, the box will take away an unacceptable volume. If you are installing roller shutters for a bathroom closet in the toilet, it is important to choose the correct dimensions of the box, which should correspond to the height of the opening. If the height of the structure is impressive, then the full opening of the space will require a more impressive number of turns to be wound on the shaft.

Installing in the overlay

Shutters in the toilet with their own hands can be installed in the overlay. This option is used when the construction will be located on a thin enough wall. As an example, we can cite the case when gypsum board was used as a basis, and tiles were laid on it. Top guides are installed. With this method, additional fixation to the surface of the ceiling is not required. For this reason, a fairly robust and simple construction is obtained.

Technology of installation works

Mounting the roller blind in the toilet involves several steps, the first is the installation of a box. To perform these manipulations, decorative protection is removed. Then the master must make a fixation between the walls of the niche, which are opposite to each other, the fastening can be made to the front. The latter option involves fixing to the wall on which a niche is formed.

This can be done by any home wizard, for this you need to use a perforator, with which you can drill holes. They are fitted with plugs that will hold the screws or dowels. Fasteners are installed through the holes in the housing.

Mounting the feather bar

This component of the system, which will enter the canvas, is installed on the floor or a special box, which is designed to limit the length of the niche. Fastening of the strip is made by two self-tapping screws, which are installed in pre-formed holes.

Work on guides

Before installing roller shutters in the toilet, it is important to fit the guides to the size. To do this, you need to determine the distance from the feathered bar to the bottom of the drum. This indicator will determine the length of the guides. Their installation is done using the same technology that was used to install all the elements of the system. Use here you need screws that are installed in the butt of the niche. The installation of a roller blind in the toilet can involve some difficulties, which are connected with the establishment of the canvas in the guides. In order to facilitate the work, first you need to place a place where the guides will be fixed. After they are put on the canvas. At the next stage, the master must produce the final fixation of the guides.

What else does the master need to know?

The shutters for the closet in the toilet after carrying out all the above manipulations can be considered ready for operation. It only remains to close the lid, which belongs to the box. Professionals are advised to order the described products at the final stage of repairing the room in the bathroom. This is recommended after the niche is fully formed and ready. It is necessary to finish the ceilings and walls. It should not, however, hurry with the installation of plumbing fixtures, they are mounted after the shutters are in place. This is due to the fact that the installation work in which the blinds are involved will be difficult when the toilet is installed or the sink that obstructs the opening.

Conclusion

When choosing roller shutters, you must take into account the interior features and shades, which are the decorative materials used in the repair of the premises. Only in this way it will be possible to achieve that the ready-made shutters (in the toilet) harmoniously looked with all the elements of the bathroom.