HomelinessTools and equipment

Radiotherapy radial with electric drive

A radiobar radiator is a device intended for obtaining honey from the framework, the principle of which is based on the centrifugal force. This device greatly simplifies the work of the beekeeper, while it can not only be purchased at a specialized store, but also made independently. In the opinion of the owners, such equipment in some cases surpasses store analogues in terms of efficiency and period of operation.

Design

The radiograph is composed of two main elements, such as:

  • Drum with cassettes , the sizes of which are selected in accordance with the used frames. In one cassette you can place two frames. For their production a metal coarse mesh is used.
  • A metal tank. The optimum option is a container made of food grade stainless steel or aluminum.

To drain honey at the bottom of the tank is equipped with a special crane. Before placing the frames, the honeycomb combs are printed with a hedgehog, a beekeeping fork or an apiary knife. During the rotation, the product under the influence of centrifugal force flows out of the cells and enters the tank, draining along the walls of the device. A suitable container is put under the drain hole, for example, milk jars.

Description

A radiotherapy radial drive with electric drive is useful for beekeepers who have at their disposal a large number of hives and are engaged in the sale of products. Despite this, many try to postpone the purchase as much as possible, considering it not the most successful investment of funds. This is due to the fact that the devices are quite expensive, but they are of low quality. Naturally, it is difficult to imagine the large scale of honey production without professional equipment, but in many cases it is possible to confine ourselves to a device made at home. In this case, the beekeeper does not need to have any special knowledge or to seek help from specialists. One of the non-standard and simple options is the radiobath, made by hand from the washing machine. For its implementation, it is sufficient to equip the machine tank with cassettes of suitable size. The most commonly used technique is the "Baby" type.

Benefits

There are two types of equipment - chordial and radial. The latter has become most widespread due to the presence of many advantages:

  • With the same size of the two versions, the radial device provides better performance.
  • Radiotherapy radar with electric drive, reviews about which are mostly positive, allows you to place a large number of honeycombs and easily pumping out the product from the zabrusa. This greatly simplifies the task, since manual pumping takes a lot of time and is ineffective.
  • From the frames all the available honey is pumped out, and their surface remains clean. Such a result is beyond the power of a different type of apparatus.
  • All components of the structure remain stationary during operation, only the drum rotates. This increases the service life and wear resistance.
  • The probability of breakage of the framework is minimized, thereby reducing losses.
  • The design is arranged in such a way that the cells always remain intact.
  • Saves time. The device does not require constant monitoring by the beekeeper.
  • During the pumping of the product, the frames do not stick to the surface of the drum, respectively, at the end of the process they will be easily pulled out.

Drawing

Radiobank, photo of which is presented above, is realized in all stores of the corresponding goods. But it is quite expensive, on average, the purchase will cost about 40-50 thousand rubles. This has led to the fact that many beekeepers tend to make equipment themselves. Such a task is possible for any person, but if possible, it is still worthwhile to turn to a more experienced beekeeper.

First of all, it is necessary to draw a drawing of the device. This is an integral stage of the work, which should show all the components in the correct location and in view of their overall dimensions. In this case, do not forget about the connection of parts. Drawing can be painted independently or ask for help from those who already have a similar experience. You can also find enough options in the literature.

Device manufacturing

The main component of the structure is a drum, the diameter of which should be within 120 cm. Any solid drum with a capacity of at least 300 liters can be used as it.

In accordance with the chosen design, a gear or belt pair is selected. Also, you need reliable fasteners and material for the brackets.

Radiotechnical radial drive with electric drive, created by oneself, supplemented with cassettes, for their production a grid, corners or pipes and the drum frames themselves are needed. Also, bearings and a drain valve of the appropriate size are required.

Materials used

The device can be equipped with a manual or electric drive, the latter is more user-friendly and will significantly accelerate the process. Typically, an electric motor with a power of at least 50 rpm is used. All the details should be selected taking into account that they will be in contact with the food product, therefore it is necessary to choose high-quality materials. Stainless steel is the best option, with a limited budget, you can use aluminum. Once all the components have been prepared, you can proceed with the assembly of the structure, it is important not to deviate from the existing drawing.

Recommendations

There are several conditions, compliance with which allows you to get high-quality and convenient equipment:

  • To create the device, you can not use parts that have a zinc coating. This is due to the fact that this metal is prone to oxidation processes that reduce the quality of the product.
  • To radish homemade radish look more aesthetic and attractive, it can be painted in the desired shade. Painting can be done with a special composition in a can or paint designed for metal products.
  • Hand tools are suitable for those who have just started beekeeping or realize honey on a small scale. But still, electric drives are more convenient to use, and their manufacture is under the power of any bee-keeper.
  • Radioteas can be created not only from metal, but also from wood. Exceptions are such details as an axle, a pulley and bearings. You can use any material that does not contain tar. If you need to reduce the weight of the device, you should pay attention to the plywood.
  • It is desirable that the constituent elements have a smooth, flat surface, otherwise the product may become stuck on the parts.

Electric drive

It will take an electric motor with a small power within 80 W. It must be supplemented with a fine mesh to prevent the bees from entering the interior of the structure. The functions of the switch can be performed by a relay from a conventional washing machine. The rheostat from any shield is used as a detail for adjusting the revolutions, the only thing is to add a nichrome spiral to it.

Then a small bracket with vertical movement is formed. In order to make a drive disk, a pulley is removed from the rotor.

The motor arrangement can be either vertical or horizontal. The first option is more convenient and practical. However, in some designs, only horizontal placement is possible.

Stand

A stand is required for any device, regardless of its size. It provides the possibility of installing containers for collecting honey.

Many replace the stand with usual boxes. This is not the best option because of the danger of use and complicated operation. Using a steel rod and a welding machine, it is possible to produce a simple and at the same time reliable construction. The work is done as follows:

  • A ring with a diameter slightly exceeding the drum's dimensions is formed from the rod.
  • On the lower part the holder with legs is fixed, their number should be not less than 3-4 pieces. Depending on the size of the radiator and whether there are any features, a suitable height of the legs is selected.

The manufacture of a honey collection machine does not cause difficulties even for an inexperienced person. In this case, no special costs are required, since the necessary components can be found in almost every home.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.birmiss.com. Theme powered by WordPress.